Improving the reliability of highly loaded rolling bearings: The effect of upstream processing on inclusions
Source abstract
Abstract
The connection between the cleanliness of 52100 type bearing steels and their reliability has been well documented. Most research over the past 30 years has focused on sensitive compositional control during metallurgical refinement, leading to steels so clean that industrial cleanness standards are no longer suitable for quantifying further improvements. There is less literature, however, detailing the mechanism by which different impurities initiate rolling contact fatigue (RCF). Early work focused on comparing fatigue lives with cleanness ratings, which include a worst field analysis to determine the inclusion content and post-failure analysis to determine damage nucleation sites. The stress concentrations around discontinuities in the steel matrix can now however be visualised using computational modelling techniques. There is now a much clearer picture of how non-metallic inclusions (NMIs) nucleate fatigue damage by causing changes in the subsurface microstructure, including white etching regions in the form of butterflies. Size, morphology, distribution and type of inclusion are important factors for determining their role in RCF and the ability to control these variables could lead to improved performance. The inclusion character is greatly influenced by the steelmaking process, from initial melt through to casting, as well as hot deformation. While the impact of microchemical banding on RCF is not well understood, the effect of microsegregation on the phases that form can be modelled using simple calculations. Hot rolling techniques also influence the steel cleanliness, as NMIs can be plastically deformed or broken up and voids can be introduced around them, thus affecting the interface with the matrix. Understanding the microstructure evolution from materials characterisation and the ability to model the process could establish an optimum degree of rolling reduction. This could greatly aid the production of large bearings, as some manufacturers currently make them from very large ingots to achieve the necessary reduction ratio and therefore required level of performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science & Metallurgy, University of Cambridge, Cambridge CB3 0FS, UK
References (100+)
Show source-provided references
1. Lund T. B. and Torresvoll K. : ‘Quantification of large inclusions in bearing steels’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Green W. B.) 27–38; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12118S ↗
2. Ito S. Tsushima N. and Muro H. : ‘Accelerated rolling contact fatigue test by a cylinder-to-ball rig’ in ‘Rolling contact fatigue testing of bearing steels’ ASTM STP 771 (ed. Hoo J.) 125–135; 1982 Philadelphia PA American Society for Testing and Materials.10.1520/STP36136S ↗
3. Girodin D. Dudragne G. Courbon J. and Vincent A. : ‘Statistical analysis of non-metallic inclusions for the estimation of rolling contact fatigue range and quality control of bearing steel’ in ‘Bearing steel technology – advances and state of the art in bearing steel quality assurance’ ASTM STP 1465 (ed. Beswick J.) 85–101; 2007 Philadelphia PA American Society for Testing and Materials.10.1520/STP41642S ↗
4. Zaretsky E. V. : ‘Selection of rolling-element bearing steels for long-life applications’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J. J. C.) 5–43; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26225S ↗
5. Lund T. and Akesson J. : ‘Oxygen content oxidic microinclusions and fatigue properties of rolling bearing steels’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 308–330; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26243S ↗
6. Kato Y. Sato K. Hiraoka K. and Nuri Y. : ‘Recent evaluation procedures of nonmetallic inclusions in bearing steels (statistics of extreme value method and development of higher frequency ultrasonic testing method)’ in ‘Bearing steel technology’ ASTM STP 1419 (ed. Beswick J.) 176–194; 2002 West Conshohocken PA American Society for Testing and Materials.10.1520/STP10854S ↗
7. Kerrigan A. Kuijpers J. C. Gabelli A. and Ioannides E. : ‘Cleanliness of bearing steels and fatigue life of rolling contacts’ in ‘Bearing steel technology – advances and state of the art in bearing steel quality assurance’ ASTM STP 1465 (ed. Beswick J.) 101–106; 2007 Philadelphia PA American Society for Testing and Materials.10.1520/STP41643S ↗
8. Baum R. Bohnke K. Boeckers T. and Klemp H. : ‘Properties of through-hardening bearing steels produced by BOF blowing metallurgy and by electric arc furnace with ladle metallurgy’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 360–374; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26246S ↗
9. 10.1016/j.ijfatigue.2009.07.01210.1016/j.ijfatigue.2009.07.012 ↗
10. Olund L. Lund T. and Hedberg B. : ‘Fatigue initiation and endurance in low oxygen ball bearing steel’ in 5th Int. Conf. on ‘Clean steel’ Balatonfured Hungary June 1997 Vol. 2 137–143.
11. Akesson J., and Lund T., : ‘SKF rolling bearing steels - properties and processes’, Ball Bear. J., 1983, 217, 32–44.
12. 10.1016/0142-1123(89)90055-810.1016/0142-1123(89)90055-8 ↗
13. Hampshire J. M. and King E. : ‘Quantitative inclusion ratings and continuous casting: user experience and relationships with rolling contact fatigue life’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. J. J. C. Hoo) 61–80; 1988 American Society for Testing and Materials.10.1520/STP26227S ↗
14. Lund T. B. : ‘Sub-surface initiated rolling contact fatigue influence of non-metallic inclusions processing history and operating conditions’ in ‘Bearing steel technology: developments in rolling bearing steels and testing’ ASTM STP 1524 (ed. Beswick J. M.) 81–96; 2010 Philadelphia PA American Society for Testing and Materials.10.1520/STP49124S ↗
15. Zheng L., and Minghua X., : ‘Study of vacuum carbon deoxidation of high carbon chromium-bearing steel’, J. ASTM Int., 2007, 3, 19–24.
16. 10.1179/174328408X27597310.1179/174328408X275973 ↗
17. 10.1007/BF0266936610.1007/BF02669366 ↗
18. 10.1016/j.ijfatigue.2011.09.01510.1016/j.ijfatigue.2011.09.015 ↗
19. ‘Standard specification for high-carbon anti-friction bearing steel’ ASTM-A295/A295M-09 Tech. Rep. American Society for Testing and Materials Philadelphia PA USA 2009.
20. ‘Standard specification for high hardenability antifriction bearing steel’ ASTM-A485-09 Tech. Rep. American Society for Testing and Materials Philadelphia PA USA 2009.
21. ‘Standard specification for stainless anti-friction bearing steel’ ASTM-A756-09 Tech. Rep. American Society for Testing and Materials Philadelphia PA USA 2009.
22. 10.1016/j.pmatsci.2011.06.00210.1016/j.pmatsci.2011.06.002 ↗
23. Davies I. G. Clarke M. A. and Dulieu D. : ‘Ladle refining: an integral part of bearing steel manufacture’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 375–389; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26247S ↗
24. Ginzburg V. B. : ‘Steel rolling technology: Theory and Practice’ 1989 New York Marcel Dekker/CRC Press.10.1201/9781466593510 ↗
25. 10.1016/j.calphad.2010.06.00310.1016/j.calphad.2010.06.003 ↗
26. 10.1051/metal/19969301011910.1051/metal/199693010119 ↗
27. Odar J. A. and Fecich D. J. : ‘The ladle refining process for bearing-quality steels’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 263–277; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26240S ↗
28. Whittaker D. A. : ‘The effects of ladle refining with and without vacuum on bearing steel quality’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 331–347; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26244S ↗
29. Krabiell A. Rzepczyk H. Schuler V. Schutz C. H. and Tembergen D. : ‘Development of process capability and testing techniques for the production of bearing steels’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Green W.) 231–247; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12131S ↗
30. 10.1007/s11663-006-0057-010.1007/s11663-006-0057-0 ↗
31. Pasarica V., , Croitoru J., , Constantinescu S., , Dobrescu E., and Cioaca E., : ‘The origin and content of Al2O3 nonmetallic inclusions in ball bearing steel’, Metalurgia, 1981, 33, 329–349.
32. Auclair G. Ruby-Meyer F. Meilland R. and P R.: ‘Cleanliness assessment: a critical review and a real need to predict rolling contact fatigue behaviour’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Green W. B.) 39–54; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12119S ↗
33. Nishikawa T. Nagayama H. Nishimon S. Asai K. Fujii I. and Sugimoto T. : ‘Study of evaluating method for non-metallic inclusions and development of slag refining for bearing steel’ in ‘Bearing steel technology’ ASTM STP 1419 (ed. Beswick J.) 148–163; 2002 Philadelphia PA American Society for Testing and Materials.10.1520/STP10852S ↗
34. Vyatkin A. G., , Povolotskii D. Y., and Gudim Y. A., : ‘Origin of complex globular and stringer oxide inclusions in bearing steel’, Steel USSR, 1989, 19, (6), 242–244.
35. Vander Voort G. F. : ‘Inclusion ratings: past present and future’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. J. J. C. Hoo and W. B. Greene) 13–26; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12117S ↗
36. Stahl F. Hirsch T. and Mayr P. : ‘Aplication of continuous casting steel 100Cr6 for bearings’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Greene W. B.) 216–231; 1997 Philadelphia PA American Society for Testing and Materials.10.1520/STP12130S ↗
37. 10.1007/s11661-011-1045-910.1007/s11661-011-1045-9 ↗
38. Hengerer F. Beswick J. M. and Kerrigan A. : ‘Evaluation of the continuous casting method for bearing steel production skf experience’ in ‘Creative use of bearing steels’ ASTM STP 1195 (ed. Hoo J. J. C.) 237–251; 1993 Philadelphia PA American Society for Testing and Materials.10.1520/STP24838S ↗
39. Bombardelli B. Pacchiani G. Holzner H. and Hoo J. J. C. : ‘The distribution and quantitative relationship of oxygen and inclusions in high-carbon ball bearing steel’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 166–188; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26234S ↗
40. Trojahn W. Janser K. and Roesch O. : ‘Experiences in using ultrasonic testing of bearing steel for demanding applications’ in ‘Bearing steel technology - advances and state of the art in bearing stell quality assurance’ ASTM STP 1465 (ed. Beswick J.) 27–33; 2007 Philadelphia PA American Society for Testing and Materials.10.1520/STP41636S ↗
41. Unigame Y. Hiroaka K. Takasu I. and Kato Y. : ‘Evaluation proceedure of nonmetallic inclusions in steel for highly reliable bearings’ in ‘Bearing steel technology – advances and state of the art in bearing steel quality assurance’ ASTM STP 1465 (ed. Beswick J.) 34–42; 2007 Philadelphia PA American Society for Testing and Materials.10.1520/STP41637S ↗
42. 10.1080/0569819620897247910.1080/05698196208972479 ↗
43. Jarczyk G., and Franz H., : ‘Vacuum melting equipment and technologies for advanced materials’, Mater. Sci. Eng., 2012, 56, (2), 82–88.
44. 10.1179/1743284711Y.000000004310.1179/1743284711Y.0000000043 ↗
45. 10.1016/0025-5416(84)90076-410.1016/0025-5416(84)90076-4 ↗
46. 10.2355/isijinternational1966.7.19710.2355/isijinternational1966.7.197 ↗
47. 10.1016/j.scriptamat.2009.06.00210.1016/j.scriptamat.2009.06.002 ↗
48. 10.1179/mst.1990.6.11.107210.1179/mst.1990.6.11.1072 ↗
49. 10.1016/1359-6454(95)00146-710.1016/1359-6454(95)00146-7 ↗
50. 10.1016/0026-0800(79)90039-910.1016/0026-0800(79)90039-9 ↗
51. 10.1179/imtr.1977.22.1.21310.1179/imtr.1977.22.1.213 ↗
52. Hilty D. C., and Kay D. A., : ‘Inclusions in steels’, Elect. Furnace Steelmak. Conf. Proc., 1985, 43, 237–251.
53. Adishesha P. K. : ‘Effect of steel making and processing parameters on carbide banding in commercially produced ASTM A-295 52100 bearing steel’ in ‘Bearing steel technology’ ASTM STP 1419 (ed. Beswick J.) 27–46; 2002 West Conshohocken PA American Society for Testing and Materials.10.1520/STP10844S ↗
54. 10.1007/s11663-003-0084-z10.1007/s11663-003-0084-z ↗
55. 10.1179/1743284711Y.000000006610.1179/1743284711Y.0000000066 ↗
56. 10.1080/1040200090322632510.1080/10402000903226325 ↗
57. Branch N. Arakere N. Svendsen V. and Forster N. : ‘Stress field evolution in a ball bearing raceway fatigue spall’ in ‘Bearing steel technology: developments in rolling bearing steels and testing’ ASTM STP 1524 (ed. Beswick J. M.) 57–80; 2010 Philadelphia PA American Society for Testing and Materials.10.1520/STP49123S ↗
58. 10.1080/1040200090322636610.1080/10402000903226366 ↗
59. 10.1080/1040200090322631710.1080/10402000903226317 ↗
60. 10.1016/j.wear.2005.09.00910.1016/j.wear.2005.09.009 ↗
61. Sayles R. S. and Macpherson P. B. : ‘Influence of wear debris on rolling contact fatigue’ in ‘Rolling contact fatigue testing of bearing steels’ ASTM STP 771 (ed. Hoo J.) 255–274; 1982 Philadelphia PA American Society for Testing and Materials.10.1520/STP36144S ↗
62. 10.1046/j.1460-2695.2002.00574.x10.1046/j.1460-2695.2002.00574.x ↗
63. 10.1016/S0142-1123(02)00037-310.1016/S0142-1123(02)00037-3 ↗
64. 10.2472/jsms.49.77910.2472/jsms.49.779 ↗
65. Glover D. : ‘A ball-rod rolling contact fatigue tester’ in ‘Rolling contact fatigue testing of bearing steels’ ASTM STP 771 (ed. Hoo J. J. C.) 107–124; 1982 Philadelphia PA American Society for Testing and Materials.10.1520/STP36135S ↗
66. Murakami Y. : ‘Metal fatigue’; 2002 Amsterdam Elsevier.
67. 10.1179/174328413X1375885483215710.1179/174328413X13758854832157 ↗
68. Schlicht H. Schreiber E. and Zwirlein O. : ‘Effects of material properties on bearing steel fatigue strength’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J. J. C.) 81–101; 1988 Philadelphia PA ASTM.10.1520/STP26228S ↗
69. 10.1016/0043-1648(70)90176-610.1016/0043-1648(70)90176-6 ↗
70. 10.2355/isijinternational1966.10.9810.2355/isijinternational1966.10.98 ↗
71. 10.1007/BF0264724010.1007/BF02647240 ↗
72. 10.1016/j.msea.2013.02.00410.1016/j.msea.2013.02.004 ↗
73. 10.1016/S0301-679X(03)00076-810.1016/S0301-679X(03)00076-8 ↗
74. 10.1016/j.msea.2009.02.00810.1016/j.msea.2009.02.008 ↗
75. Johnson K. L. : ‘Contact mechanics’; 1987 Cambridge Cambridge University Press.
76. Tsushima N. Maeda K. Nakashima H. and Kashimura H. : ‘New steels now in use for automotive rolling element bearings’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Greene W. B.) 279–291; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12134S ↗
77. Furumura K. Murakami Y. and Kashimura H. : ‘Case hardening medium carbon steel for tough and long bearing under severe lubrication conditions’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Greene W. B.) 293–306; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12135S ↗
78. Voskamp A. : ‘Fatigue and material response in rolling contact’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Greene W. B.) 152–167; 1998 Philadelphia PA American Society for Testing and Materials 1998.10.1520/STP12126S ↗
79. Grabulov A. and Zandbergen H. : ‘Beam (SEM/FIB) investigations of subsurface cracks and white etching area (WEA) formed in a deep groove ball bearing caused by rolling contact fatigue’ in 3rd Int. Conf. on ‘Deformation processing and structure of materials (DPSM 2007)’ Belgrade Serbia 2007.
80. 10.1016/0022-5096(95)00001-Y10.1016/0022-5096(95)00001-Y ↗
81. 10.1016/j.ijfatigue.2009.07.00210.1016/j.ijfatigue.2009.07.002 ↗
82. 10.2355/isijinternational1966.11.910.2355/isijinternational1966.11.9 ↗
83. 10.1179/026708311X1313595069925410.1179/026708311X13135950699254 ↗
84. Vincent A. Lormand G. Lamagnere P. Gosset L. Girodin D. Dudragne G. and Fourgeres R. : ‘From white etching areas formed around inclusions to crack nucleation in bearing steels under rolling contact fatigue’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J. J. C. and Greene W. B.) 109–123; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12123S ↗
85. 10.1007/BF0264242210.1007/BF02642422 ↗
86. 10.1016/0043-1648(91)90186-X10.1016/0043-1648(91)90186-X ↗
87. Hiraoka K., , Nagao M., and Isomoto T., : ‘Study on flaking process in bearings by white etching area generation’, J. ASTM Int., 2006, 3, (6), 234–240.
88. Ryden K. and Lund T. B. : ‘Rotating beam testing of bearing steels an effective rolling contact fatigue test complement’ in ‘Bearing steel technologies: advances in rolling contact fatigue strength testing and related substitute technologies’ ASTM STP 1548 (ed. Beswick J. M.) 203–217; 2012 Philadelphia PA American Society for Testing and Materials.10.1520/STP104540 ↗
89. Lormand G. Meynaud P. Vincent A. Baudry G. Girodin D. and Dudragne G. : ‘From cleanliness to rolling fatifue life of bearings - a new approach’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. J. J. C. Hoo and W. B. Greene) 55–69; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12120S ↗
90. Brooksbank D., and Andrews K. W., : ‘Thermal expansion of some inclusions found in steels and relation to tessellated stresses’, J. Iron Steel Inst., 1968, 206, (6), 595–599.
91. Brooksbank D. and Andrews K. W. : ‘Stress fields around inclusions and their relation to mechanical properties’ in ‘Production and application of clean steels’ 186–198; 1972 London Iron and Steel Institute.
92. Lund T. B. Johansson S. A. and Olund L. J. R. : ‘Nucleation of fatigue in very low oxygen bearing steels’ in ‘Bearing steels: into the 21st century’ ASTM STP 1327 (ed. Hoo J.) 124–130; 1998 Philadelphia PA American Society for Testing and Materials.10.1520/STP12124S ↗
93. Lund T. and Olund L. : ‘Improving production control and properties of bearings steels intended for demanding applications’ in ‘Advances in the production and use of steel with improved internal cleanliness’ ASTM STP 1361 (ed. Mahaney J.) 33–48; 1999 Philadelphia PA American Society for Testing and Materials.10.1520/STP12372S ↗
94. Monnot J. Heritier B. and Cogne J. Y. : ‘Relationship of melting practice inclusion type and size with fatigue resistance of bearing steels’ in ‘Effect of steel manufacturing processes on the quality of bearing steels’ ASTM STP 987 (ed. Hoo J.) 149–165; 1988 Philadelphia PA American Society for Testing and Materials.10.1520/STP26232S ↗
95. 10.1016/j.matdes.2010.08.05210.1016/j.matdes.2010.08.052 ↗
96. Stover J. D. and Muralidharan U. : ‘Effect of residual titanium on rolling contact fatigue resistance of bearing steels’ in ‘Impact of improved material quality on properties product performance and design’ 159–169; 1991 Philadelphia PA American Society for Mechanical Engineers.
97. 10.1007/BF0265471410.1007/BF02654714 ↗
98. Burkart K. Bomas H. Schroeder R. and Zoch H. : ‘Rolling contact and compression-torsion fatigue of 52100 steel with special regard to carbide distribution’ in ‘Bearing steel: advances in rolling contact fatigue strength testing and related substitute technologies’ ASTM STP 1548 (ed. Beswick J. M.) 218–236; 2012 Philadelphia PA American Society for Testing and Materials.10.1520/STP104506 ↗
99. Backstrom S., : ‘Effect of sulphide inclusions on the endurance of ball bearings – clean steel vol. 1’, Rep. R. Swedish Acad. Eng. Sci., 1971, 169, (1), 170–177.
100. Lund T. and Akesson J. : ‘Cleanliness requirements on rolling bearing steels’ in 3rd Int. Conf. on ‘Clean steel’ London UK 1987 209–216.