journal article·2011-02

Stabilisation of ferrite in hot rolled δ-TRIP steel

H. L. Yi, K. Y. Lee, H. K. D. H. Bhadeshia

Materials Science and Technology· Volume 27· Issue 2
Publisher page

Abstract

A steel has recently been designed to benefit from the deformation induced transformation of retained austenite present in association with bainitic ferrite. It has as its major microstructural component, dendrites of δ-ferrite introduced during solidification. The δ-ferrite replaces the allotriomorphic ferrite present in conventional alloys of this kind. The authors examine here the stability of this δ-ferrite during heating into a temperature range typical of hot rolling conditions. It is found that contrary to expectations from calculated phase diagrams, the steel becomes fully austenitic under these conditions and that a better balance of ferrite promoting solutes is necessary in order to stabilise the dendritic structure. New alloys are designed for this purpose and are found suitable for hot rolling in the two-phase field over the temperature range 900–1200°C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Institute of Ferrous Technology (GIFT) Pohang University of Science and Technology (POSTECH), Pohang 790-784, Korea

POSCO Technical Research Laboratories Gwangyang-si, Jeonnam, Korea

Department of Materials Science and Metallurgy University of Cambridge, Cambridge CB2 3QZ, UK

References (15)

Show source-provided references
1. 10.1179/174328407X17974610.1179/174328407X179746 ↗
2. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
3. 10.1016/0036-9748(87)90103-710.1016/0036-9748(87)90103-7 ↗
4. 10.1007/BF0265681610.1007/BF02656816 ↗
5. 10.2355/isijinternational.31.134810.2355/isijinternational.31.1348 ↗
6. 10.2355/isijinternational.39.5610.2355/isijinternational.39.56 ↗
7. 10.2355/isijinternational.42.105910.2355/isijinternational.42.1059 ↗
8. 10.1016/j.cossms.2004.09.00610.1016/j.cossms.2004.09.006 ↗
9. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
10. Gerberich W. W., Thomas G., Parker E. R., and Zackay V. F. ‘Metastable austenites: decomposition and strength’, Proc. 2nd Int. Conf. on ‘Strength of metals and alloys’, Pacific Grove, CA, USA, August–September 1970, ASM International, 894–899.10.2172/4117194 ↗
11. Santella M., Babu S. S., Riemer B. W., and Fang Z. ‘Influence of microstructure on the properties of resistance spot welds’, in ‘Trends in welding research’, (ed. David S. A., et al.), 605–609 1999, Materials Park, OH, ASM International.10.2172/290922 ↗
12. 10.1179/174328409X42891810.1179/174328409X428918 ↗
13. NPL: ‘MTDATA’; 2006, Teddington, NPL.
14. 10.1179/174328407X17685710.1179/174328407X176857 ↗
15. Bentle G. G. · Trans. Am. Inst. Min. Metall. Eng. · 1956 · 206 · 1345