Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation
Source abstract
Abstract
Deformation behaviour of AA6061 alloy was investigated using uniaxial compression tests at temperatures from 400 to 500°C and strain rates from 0·01 to 1 s−1. Stress increases to a peak value, then decreases monotonically until reaching a steady state. The dependence of stress on temperature and strain rate was fitted to a sinh-Arrhenius equation and characterised by the Zener–Hollomon parameter with apparent activation energy of 208·3 kJ mol−1. Grain orientation spread analysis by electron backscattered diffraction indicated dynamic recovery and geometrical dynamic recrystallisation during hot compression. Deformation at a faster strain rate at a given temperature led to finer subgrains, resulting in higher strength. Dynamic precipitation took place concurrently and was strongly dependent on temperature. Precipitation of Q phase was found in the sample deformed at 400°C but none at 500°C. A larger volume fraction of precipitates was observed when samples were compressed at 400°C than at 500°C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
Ford Motor Company, 2101 Village Road, Dearborn, MI 48124, USA
References (38)
Show source-provided references
1. 10.1016/S0924-0136(03)00467-910.1016/S0924-0136(03)00467-9 ↗
2. 10.1016/j.msea.2010.05.00310.1016/j.msea.2010.05.003 ↗
3. 10.1016/j.jmatprotec.2011.09.01810.1016/j.jmatprotec.2011.09.018 ↗
4. 10.1016/j.actamat.2008.08.05010.1016/j.actamat.2008.08.050 ↗
5. 10.1016/S1359-6454(03)00078-810.1016/S1359-6454(03)00078-8 ↗
6. 10.1007/BF0267076310.1007/BF02670763 ↗
7. 10.1016/S0921-5093(00)00933-310.1016/S0921-5093(00)00933-3 ↗
8. 10.1016/1044-5803(95)00062-310.1016/1044-5803(95)00062-3 ↗
9. 10.1007/s11837-998-0124-x10.1007/s11837-998-0124-x ↗
10. 10.1016/j.msea.2010.11.04810.1016/j.msea.2010.11.048 ↗
11. 10.1179/cmq.1997.36.2.7310.1179/cmq.1997.36.2.73 ↗
12. 10.1016/j.msea.2004.01.06410.1016/j.msea.2004.01.064 ↗
13. 10.1016/0036-9748(85)90268-610.1016/0036-9748(85)90268-6 ↗
14. 10.1016/0001-6160(86)90171-910.1016/0001-6160(86)90171-9 ↗
15. 10.1016/S0921-5093(00)00733-410.1016/S0921-5093(00)00733-4 ↗
16. 10.1016/S1359-6454(02)00048-410.1016/S1359-6454(02)00048-4 ↗
17. 10.1016/j.actamat.2012.01.00210.1016/j.actamat.2012.01.002 ↗
18. 10.1016/0001-6160(89)90062-X10.1016/0001-6160(89)90062-X ↗
19. Evangelista E · Int. J. Mater. Prod. Technol. · 1990 · 5 · 84
20. 10.1016/0924-0136(90)90193-X10.1016/0924-0136(90)90193-X ↗
21. Cabibbo M · Metall. Mater. Trans. A · 2005 · 36 · 135410.1007/s11661-005-0226-9 ↗
22. 10.1080/0141861990821429510.1080/01418619908214295 ↗
23. 10.1179/1743284712Y.000000004110.1179/1743284712Y.0000000041 ↗
24. 10.1016/j.matchar.2006.04.01210.1016/j.matchar.2006.04.012 ↗
25. 10.1016/S0924-0136(01)00978-510.1016/S0924-0136(01)00978-5 ↗
26. 10.1016/S0921-5093(01)01117-010.1016/S0921-5093(01)01117-0 ↗
27. 10.1016/j.msea.2012.02.03510.1016/j.msea.2012.02.035 ↗
28. 10.1016/j.msea.2005.12.01810.1016/j.msea.2005.12.018 ↗
29. 10.1016/S0921-5093(01)01099-110.1016/S0921-5093(01)01099-1 ↗
30. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
31. 10.1179/mst.1996.12.11.88910.1179/mst.1996.12.11.889 ↗
32. 10.4028/www.scientific.net/MSF.113-115.4110.4028/www.scientific.net/MSF.113-115.41 ↗
33. 10.1016/0921-5093(95)09990-510.1016/0921-5093(95)09990-5 ↗
34. 10.1016/0921-5093(89)90405-X10.1016/0921-5093(89)90405-X ↗
35. 10.1007/BF0266156510.1007/BF02661565 ↗
36. 10.1016/0025-5416(86)90265-X10.1016/0025-5416(86)90265-X ↗
37. 10.1016/0956-7151(92)90006-Z10.1016/0956-7151(92)90006-Z ↗
38. 10.1016/S0079-6425(03)00031-810.1016/S0079-6425(03)00031-8 ↗