Oxidation resistant Ru containing Ni base single crystal superalloys
Source abstract
Abstract
Oxidation resistant fourth and fifth generation Ni base superalloys were developed. The fourth generation superalloys TMS-138A were modified by increasing the content of Al and Cr and deceasing Mo. Designed alloys were cast as single crystal and examined in cyclic and isothermal exposures at 1100°C and creep rupture test. Under high temperature/low stress condition, 0·5 wt-% of Al addition was effective to improve the oxidation resistance but degrade creep property. Cr addition and Mo and W reduction were effective to improve the oxidation resistance and display creep property almost equal to the original TMS-138A. The fourth generation superalloy TMS-138 and fifth generation superalloy TMS-173 were also modified. By adding Cr and removing Mo and W, their oxidation resistances were dramatically improved. Thus it was found that it is possible to improve the oxidation resistance of Ru containing SC superalloys with keeping the high temperature strength by the increase in Cr and decrease in Mo and W.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. O'hara K. S., Walston W. S., Ross E. W., and Darolia R. ‘Nickel base superalloy and article’, US patent no. 5482789, 1996.
2. 10.2320/jinstmet.68.50710.2320/jinstmet.68.507 ↗
3. Koizumi Y., Kobayashi T., Yokokawa T., Harada H., Aoki Y., Arai M., Masaki S., and Chikugo K.: Proc. 2nd Int. Symp. on ‘High temperature materials’, 30-31; 2001, Tsukuba, National Institute for Materials Science.
4. 10.1016/S1359-6462(03)00437-810.1016/S1359-6462(03)00437-8 ↗
5. 10.1007/s11661-002-0246-710.1007/s11661-002-0246-7 ↗
6. Walston S. · Proc. 10th Int. Conf. on ‘Superalloys’
7. 10.2320/jinstmet.69.24910.2320/jinstmet.69.249 ↗
8. 10.1023/A:101256980346710.1023/A:1012569803467 ↗
9. 10.1023/A:101487840296010.1023/A:1014878402960 ↗
10. Sinharoy S., and Narasimhan S. L.: Proc. 10th Int. Conf. on ‘Superalloys’, (ed.Green K. A. et al), 623-626; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_623_626 ↗
11. 10.1016/S0010-938X(03)00184-710.1016/S0010-938X(03)00184-7 ↗
12. 10.1023/A:102360421424510.1023/A:1023604214245 ↗
13. 10.1023/A:102462971645210.1023/A:1024629716452 ↗
14. Harris K., and Wahl J. B.: Proc. 10th Int. Conf. on ‘Superalloys’, (ed.Green K. A. et al), 45-52; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.
15. Onal K., Maris-Shida M. C., Meier G. H., and Pettit F. S.: Proc. 10th Int. Conf. on ‘Superalloys’, (ed.Green K. A. et al), 607-615; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_607_615 ↗
16. Hashizume R., Yoshinari A., Kiyono T., Murata Y., and Morinaga M.: Proc. 10th Int. Conf. on ‘Superalloys’, (ed.Green K. A. et al), 53-62; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_53_62 ↗
17. Kawagishi K. · TMS Lett · 2005 · 2 · 23
18. Kawagishi K., Sato A., Sato A., Kobayashi T., and Harada H.: Mater. Set Forum, 2006, 522-523,317–322.10.4028/www.scientific.net/MSF.522-523.317 ↗
19. Harada H., Ohno K., Yamagata T., Yokokawa T., and Yamazaki M.: Proc. 6th Int. Conf. on ‘Superalloys’, (ed.Reichman S. et al), 733-742; 1988, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/1988/Superalloys_1988_733_742 ↗
20. Koizumi Y., Kobayashi T., Yokokawa T., Zhang J. X., Osawa M., Harada H., Aoki Y., and Arai M.: Proc. 10th Int. Conf. on ‘Superalloys’, (ed.Green K. A.), 35-43; 2004, Warrendale, PA, The Minerals, Metals and Materials Society.10.7449/2004/Superalloys_2004_35_43 ↗
21. 10.1007/BF0104672510.1007/BF01046725 ↗