journal article·2001-11

Evaluation of effect of chromium on wear performance of high manganese steel

I. El-Mahallawi, R. Abdel-karim, A. Naguib

Materials Science and Technology· Volume 17· Issue 11
Publisher page

Abstract

The effects of elements such as Ni, Mo, Cr, Cu, and V on the wear behaviour of high manganese steels have been reported extensively. Most researchers agree on the influence of many of the elements but disagree on the effect of Cr. A study has been conducted to evaluate the effect of 1.7 and 2.3 wt-Cr on high manganese steel when subjected to various wear conditions: impact loading, abrasion, combined impact-abrasion, and combined abrasion-corrosion. The study has revealed that adding Cr to high manganese steel resulted in an increase in hardness and hardenability, and a decrease in toughness. The effect on wear resistance was found to depend on the wear conditions. Chromium alloyed high manganese steels showed superior wear resistance compared with plain Hadfield steels where corrosion, abrasion, and combined impact-abrasion conditions prevailed. Such conditions required a high surface hardness. Plain Hadfield steel showed superior wear resistance in conditions where pure impact wear is encountered. Such conditions required an increase in toughness rather than surface hardness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. 'Properties and selection: stainless steels, tool materials, and special purpose metals', ASM Metals Handbook , 9th edn, vol. 3, 568–588; 1980, Metals Park, OH, American Society for Metals.
2. C. E. GOUIN: 'Manganese steels that do not require heat treatment', 11–14; 1976, Vail, CO, Climax Molybdenum Co.
3. TSUJIMOTO N. · Int. Cast Met. J · 1979 · 4 · 62
4. HERMAN A. · Met. Eng. Q · 1975 · 15 · 1
5. AYDIN ATASOY O. · Z. Metalkd · 1984 · 75 · 463
6. EL-SESY I. A. · J. Eng. Appl. Sci · 1996 · 43 · 203
7. R. W. K. HONEYCOMBE: 'Steels—microstructure and properties', 1981, London, Edward Arnold.
8. 10.1179/cmq.2000.39.3.36110.1179/cmq.2000.39.3.361 ↗
9. D. E. DIESBURG and F. BORIK: Proc. Symp. On 'Materials for the mining industry', Vail, CO, USA, 1974, Climax Molybdenum Co. 15–28.
10. SCHMIDT I. · Z. Metallkd · 1987 · 78 · 127 — 130