journal article·1993-11

Microstructure–property relationships in tempered low alloy Cr–Mo–3·5Ni–V steel

S. Maropoulos, J. D. H. Paul, N. Ridley

Materials Science and Technology· Volume 9· Issue 11
Publisher page

Abstract

The effect of varying normalising and hardening temperatures, before tempering at ~620°C, on the strength and toughness of a low alloy Cr–Mo–3·5Ni–V (wt-%) steel has been examined. Microstructural features including martensite packet and lath size, dislocation density, and precipitate size were measured and used in a Hall–Petch analysis of the strengthening components. It was found that a rms summation of the strengthening contributions to the 0·2% proof stress gave values in good agreement with experimental results. The 50% fracture appearance transition temperature could be described by a relationship involving the fracture facet size and the strengthening contributions from dislocations and precipitates.MST/1802
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 10.1007/BF0264302410.1007/BF02643024 ↗
2. SMITH D. W. · J. Iron Steel Inst., · 1971 · 209 · 476
3. COX A. R. · J. Iron Steel. Inst., · 1967 · 205 · 51
4. J. A. WHITEMAN: ‘Low carbon steels for the eighties’, Series 3, No. 6, 1-7; 1977, London, The Institution of Metallurgists.
5. T. GLADMAN and F. B. PICICERING: ‘Yield, flow and fracture of polycrystals’, (ed. T. N. Baker), 141-198; 1983, London, Applied Science.
6. ASHBY M. F. · Trans. AIME · 1966 · 236 · 1397
7. 10.1088/0959-5309/59/2/30910.1088/0959-5309/59/2/309 ↗
8. SPEICH G. R. · J. Iron Steel Inst., · 1965 · 203 · 480
9. Il. A. R · Trans. Jpn Inst. Met., · 1968 · 9 · 118
10. LACY C. E. · Trans. ASM · 1944 · 32 · 88
11. ROBERTS M. J. · Metall. Trans., · 1970 · 1 · 328710.1007/BF03037855 ↗
12. A. R. MARDER and G. ICRAUSS: in Proc. 2nd Int. Conf. On ‘Strength of metals and alloys’, 822; 1970, Metals Park, OH, ASM.
13. T. SWARR and G. KRAUSS: ‘Grain boundaries in engineering materials’, (ed. J. L. Walter et al.), 127; 1975, Baton Rouge, LA, Claitors.
14. NtiRSEROM L. A. · Scand J. Metall., · 1976 · 5 · 41
15. 10.1007/BF0266531910.1007/BF02665319 ↗
16. HORNBOGEN E. · J. Mater. Se · 1979 · 573
17. LANGFORD G. · Trans. ASM · 1969 · 62 · 623
18. 10.1098/rspa.1934.010610.1098/rspa.1934.0106 ↗
19. T. N. BAKER: ‘Yield, flow and fracture of polycrystals’, (cd. T. N. Baker), 235-273; 1983, London, Applied Science.
20. 10.1016/0025-5416(73)90089-X10.1016/0025-5416(73)90089-X ↗
21. 10.1016/0025-5416(84)90079-X10.1016/0025-5416(84)90079-X ↗
22. M. E. ASHBY: ‘Oxide dispersion strengthening’, (ed. G. S. Anse11 et al.), 143-205; 1968, Pittsburgh, PA, AIME.
23. 10.1080/1478643660821264710.1080/14786436608212647 ↗
24. J. W. MARTIN: ‘Micromechanisms in particle hardened alloys'; 1980, Cambridge, Cambridge University Press.
25. L. M. BROWN and R. K. HAM: ‘Strengthening methods in crystals’, (ed. A. Kelly and R. B. Nicholson), 9-135; 1971, London, Elsevier.
26. CHATURVEDI M. C. · Met. Set. · 1976 · 10 · 373
27. 10.1080/1478643660824476210.1080/14786436608244762 ↗
28. 10.1007/BF0264594310.1007/BF02645943 ↗
29. ROCKS U. F. · Mater. Se · 1975 · 156
30. OHTANI H. · Trans. Iron Steel Inst. Jpn · 1972 · 12 · 11810.2355/isijinternational1966.12.118 ↗
31. NAYLOR J. P. · Metall. Trans., · 1974 · 5 · 169910.1007/BF02646352 ↗