journal article·2010-02

25 year perspective Aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics

J. D. Lord, B. Roebuck, R. Morrell, T. Lube

Materials Science and Technology· Volume 26· Issue 2
Publisher page

Abstract

Testing in the microregime is relevant to many technological issues, including, for example, evaluating the performance of established plant or new components through removal of small scale samples; assessing point to point variation in welded structures; characterising expensive advanced alloys that typically are only available in small quantities; and testing of subsized components. The use of miniature testpieces requires attention to the scale of the underlying microstructure relative to the overall testpiece dimensions, and presents challenges to the measurement of stress and strain in small volumes. The subject is extensive and the emphasis of the current paper is on a discussion of issues associated with the measurement of strength and strain, particularly with the latter assessed using non-contact optical techniques based on digital image correlation. The current article thus concentrates on the testing situation at the intermediate scale (in the range 0·5–5 mm) where testpieces are small compared with the size of engineering components and in the range where representative mechanical behaviour of the underlying microstructure must be considered. Metrology issues are addressed through specific case studies concerning; microuniaxial tests; small punch tests; subsized ceramic strength tests and the microindentation technique. Particular attention is paid to the uncertainties in measurement arising from the use of microscale tests to provide quantifiable levels of confidence in the ability of such tests to discriminate material behaviour.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced Surface Polishing Techniques · Optical measurement and interference techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Physical LaboratoryTeddington, Middlesex, TW11 0LW, UK

Institut für Struktur- und Funktionskeramik, Montanuniversität Leoben, A8700, Austria

References (100+)

Show source-provided references
1. ‘Small specimen test techniques’ (ed. Sokolov M. A. et al) Vol. 4 STP 1418; 2000 Philadelphia PA ASTM.
2. ‘Small specimen test techniques’ (ed. Sokolov M. A. et al) Vol. 5 STP 1502; 2007 Philadelphia PA ASTM.
3. 10.1179/174328007X16031710.1179/174328007X160317 ↗
4. 10.1016/j.actamat.2006.08.04410.1016/j.actamat.2006.08.044 ↗
5. Brooks I. Lin P. Palumbo G. Hibbard G. D. and Erb U.: ‘Analysis of hardness-tensile strength relationships for electro-formed nanocrystalline materials’ Mater. Sci. Eng. A 2008 A491 412–419.10.1016/j.msea.2008.02.015 ↗
6. 10.1016/j.actamat.2008.09.03910.1016/j.actamat.2008.09.039 ↗
7. 10.1016/j.scriptamat.2008.06.00310.1016/j.scriptamat.2008.06.003 ↗
8. 10.1016/S0022-5096(97)00086-010.1016/S0022-5096(97)00086-0 ↗
9. 10.1016/S1359-6454(03)00281-710.1016/S1359-6454(03)00281-7 ↗
10. 10.1080/0141861830823491410.1080/01418618308234914 ↗
11. 10.1016/j.actamat.2008.09.00810.1016/j.actamat.2008.09.008 ↗
12. lost A. and Bigot R.: ‘Indentation size effect: Reality or artefact?’ J. Mater. Sci. 1996 31 3573–3577.10.1007/BF00360764 ↗
13. 10.1080/1478643060074642410.1080/14786430600746424 ↗
14. 10.1088/0022-3727/41/7/07400610.1088/0022-3727/41/7/074006 ↗
15. Greer J. R.: ‘Bridging the gap between computational and experimental length scales: a review on nano-scale plasticity’, Rev. Adv. Mater. Sci, 2006, 13, 59–70.
16. 10.1016/j.actamat.2004.12.03110.1016/j.actamat.2004.12.031 ↗
17. 10.1016/j.scriptamat.2008.04.03410.1016/j.scriptamat.2008.04.034 ↗
18. 10.1016/j.actamat.2008.05.03010.1016/j.actamat.2008.05.030 ↗
19. Kiener D. Motz C. and Dehm G.: ‘Micro-compression testing: a critical discussion of experimental constraints’ Mater. Sci. Eng. A 2009 A505 79–87.10.1016/j.msea.2009.01.005 ↗
20. Frick C. P. Clark B. G. Orso S. Schneider A. S. and Arzt E.: ‘Size effect on strength and strain hardening of small-scalel 1 1 nickel compression pillars’ Mater. Sci. Eng. A 2008 A489 319–329.10.1016/j.msea.2007.12.038 ↗
21. 10.1016/j.actamat.2008.03.01110.1016/j.actamat.2008.03.011 ↗
22. 10.1016/j.actamat.2007.12.05310.1016/j.actamat.2007.12.053 ↗
23. 10.1016/j.scriptamat.2007.11.03110.1016/j.scriptamat.2007.11.031 ↗
24. 10.1016/j.actamat.2007.10.01510.1016/j.actamat.2007.10.015 ↗
25. 10.1016/j.actamat.2008.09.03310.1016/j.actamat.2008.09.033 ↗
26. 10.1016/j.scriptamat.2009.05.01210.1016/j.scriptamat.2009.05.012 ↗
27. 10.1063/1.322610610.1063/1.3226106 ↗
28. Quinta da Fonseca J. Mummery P. M. and Withers P. J.: ‘Full-field strain mapping by optical correlation of micrographs acquired during deformation’ J. Microsc. 2005 218 (1) 9–21.10.1111/j.1365-2818.2005.01461.x ↗
29. Poech M. H. and Fischmeister H. F.: ‘Deformation of two-phase materials: a model based on strain compatibility’ Acta MetalL Mater. 1992 40 (3) 487–494.10.1016/0956-7151(92)90397-W ↗
30. Fischmeister H., and Karlsson B.: ‘Plasticity of two-phase materials with a coarse microstructure’, Z. Metallkd, 1977, 68, 311–327.
31. 10.1098/rsta.1999.039110.1098/rsta.1999.0391 ↗
32. Quinta da Fonseca J. Oliver E. C. Bate P. S. and Withers P. J.: ‘Evolution of intergranular stresses during in-situ straining of IF steel with different grain sizes’ Mater. Set Eng. A 2006 A437 26–32.10.1016/j.msea.2006.04.057 ↗
33. 10.1146/annurev.matsci.36.062705.13455110.1146/annurev.matsci.36.062705.134551 ↗
34. 10.1007/s11837-009-0037-310.1007/s11837-009-0037-3 ↗
35. Sharpe W. N. Jr (ed.): ‘Springer handbook of experimental solid mechanics’; 2008 Berlin Springer Publication.10.1007/978-0-387-30877-7 ↗
36. Eaton-Evans J. Dulieu-Barton J. M. Burguete R. L. (eds.): ‘Modern stress and strain analysis — a state of the art guide to measurement techniques’: 2009 London BSSM/Eureka Publication.
37. 10.1007/BF0232355410.1007/BF02323554 ↗
38. Sutton M. A. and Wolters W. J.: ‘Determination of displacement using an improved digital image correlation method’ Image Vision Comput. 1983 1 (3) 133–139.10.1016/0262-8856(83)90064-1 ↗
39. 10.1007/BF0232509210.1007/BF02325092 ↗
40. Sutton M. A. Orteu J. J. and Schreier H.: ‘Image correlation for shape motion and deformation measurements: basic concepts theory and applications’: 2009 New York Springer Publications.
41. Peterson B. Collins P. and Fraser H.: ‘On the use of a sub-scale thermomechanical simulator to obtain accurate tensile properties of (α +β) and β-processed Ti-6A1-4V’ Mater. Set Eng. A 2009 A513—A514 357–365.10.1016/j.msea.2009.02.017 ↗
42. 10.1088/0957-0233/17/6/04510.1088/0957-0233/17/6/045 ↗
43. LaVision Strainmaster Davis 7.0 user manual November 2004.
44. Reynolds A. P. and Duvall F.: ‘Digital image correlation for determination of weld and base metal constitutive behaviour’ Am. Weld. Soc. Weld. 1 1999 78 (10) 55–360.
45. 10.4028/www.scientific.net/AMM.7-8.12710.4028/www.scientific.net/AMM.7-8.127 ↗
46. Quinta da Fonseca J. Ryan P. Preuss M. and Withers P. J.: ‘Mechanical property mapping using image correlation and electro-nic speckle interferometry’ Appl. Mech Mater. 2004 1-2 147-15210.4028/www.scientific.net/AMM.1-2.147 ↗
47. Sachtleber M. Zhao Z. and Raabe D.: ‘Experimental investigation of plastic grain interaction’ Mater. Set Eng. A 2002 A336 81-8710.1016/S0921-5093(01)01974-8 ↗
48. 10.1016/j.scriptamat.2007.01.03110.1016/j.scriptamat.2007.01.031 ↗
49. 10.1007/BF0232310110.1007/BF02323101 ↗
50. 10.1016/j.matchar.2008.01.00410.1016/j.matchar.2008.01.004 ↗
51. Moulart R. Rot R. mat Pierron F. and Lérondal G.: ‘Development of full field displacement measurement techniques at the microscale and application to the study of strain fields in a tensile steel specimen’ AppL Mech. Mater. 2007 7-8 181–186.10.4028/www.scientific.net/AMM.7-8.181 ↗
52. 10.1016/j.matchar.2005.08.00410.1016/j.matchar.2005.08.004 ↗
53. 10.1016/j.actamat.2008.11.02910.1016/j.actamat.2008.11.029 ↗
54. Guo Z. Q. Xie H. M. Liu B. C. Pan B. Chen P. W. Zhang Q. M. and Huang F. L.: ‘Digital image correlation study on micro-crystal of poly-crystal aluminum specimen under tensile load through SEM’ Key Eng. Mater. 2006 326/328 Part 1 155–158.10.4028/www.scientific.net/KEM.326-328.155 ↗
55. Zhao Y. H. Guo Y. Z. Wei Q. Topping T. D. Dangelewicz A. M. Zhu Y. T. Langdon T. G. and Lavernia E. J.: ‘Influence of specimen dimensions and strain measurement methods on tensile stress—strain curves’ Mater. ScL Eng. A 2009 A525 68–77.10.1016/j.msea.2009.06.031 ↗
56. 10.1016/j.scriptamat.2008.08.00410.1016/j.scriptamat.2008.08.004 ↗
57. Keller C., , Rachik M., and Hug E.: ‘Influence of the number of grains per thickness on strain hardening and process of nickel polycrystals’, Met. Form., 2008, 2, 176–182.
58. Canadinc D. Sehitoglu H. Maier H. J. and Kurath P.: ‘On the incorporation of length scales associated with pearlitic and bainitic microstructures into a visco-plastic self-consistent model’ Mater. ScL Eng. A 2008 A485 258–271.10.1016/j.msea.2007.08.049 ↗
59. 10.1016/j.scriptamat.2008.09.02410.1016/j.scriptamat.2008.09.024 ↗
60. Keller C. Hug E. and Chateigner D.: ‘On the origin of the stress decrease for nickel polycrystals with few grains across the thickness’ Mater. ScL Eng. A 2009 A500 207–215.10.1016/j.msea.2008.09.054 ↗
61. 10.3184/09603400678273929510.3184/096034006782739295 ↗
62. Sharpe W. N.Jr: ‘Tensile testing of MEMS materials at high temperatures’ Appl Mech. Mater. 2005 3-4 59–64.10.4028/www.scientific.net/AMM.3-4.59 ↗
63. Hoefnagels J. P. M. Janssen P. J. M. de Keijser Th. H. and Geers M. G. D.: ‘First order size effects in the mechanics of miniaturized components’ Appl Mech. Mater. 2008 13-14 183–192.10.4028/www.scientific.net/AMM.13-14.183 ↗
64. 10.4028/www.scientific.net/AMM.7-8.18710.4028/www.scientific.net/AMM.7-8.187 ↗
65. Griffiths A. Nimmo W. Roebuck B. Hinds G. and Turnbull A.: ‘A novel approach to characterising the mechanical properties of super martensitic 13Cr stainless steel welds’ Mater. ScL Eng. A 2004 A384 83–91.10.1016/S0921-5093(04)00819-6 ↗
66. 10.1016/j.scriptamat.2008.01.04910.1016/j.scriptamat.2008.01.049 ↗
67. Keller C. Hug E. and Chateigner D.: ‘On the origin of the stress decrease for nickel polycrystals with few grains across the thickness’ Mater. ScL Eng. A 2009 A500 207–215.10.1016/j.msea.2008.09.054 ↗
68. 10.1520/JTE10071310.1520/JTE100713 ↗
69. Grainger B. M., , Jones M. T., , Lovell M. R., , Link T. M., , Piehler H. R., and Marangoni R. D.: ‘Investigation of alternative methods for characterizing the yield strength of tubular steel products’, Steel Res. Int. Spec. Edn, 2008, 2, 347–355.
70. 10.1179/mst.1998.14.9-10.100110.1179/mst.1998.14.9-10.1001 ↗
71. Roebuck B. Orkney L. P. and Lord J. D.: ‘Validation of a miniature tensile strength measurement system’ Proc. ASTM 4th Symp. on ‘Small specimen test techniques’ (ed.Sokolov M. A. et al) Reno NV USA January 2001 ASTM 234–250.10.1520/STP10824S ↗
72. Roebuck B. Cox D. C. and Reed R. C.: ‘An innovative device for the mechanical testing of miniature specimens of the superalloys’ Proc. Conf. on ‘Superalloy’ (ed. Green K A et al) Seven Springs NC USA September 2004 TMS 523–528.10.7449/2004/Superalloys_2004_523_528 ↗
73. 10.1016/j.ijfatigue.2007.01.05510.1016/j.ijfatigue.2007.01.055 ↗
74. 10.1179/mht.2006.00610.1179/mht.2006.006 ↗
75. Ingelbrecht C. D. and Loveday M. S.: ‘The certification of ambient temperature tensile properties of a reference material for tensile testing according to EN 10002-1 CRM 661’ BCR report EUR 19589 EN 2000.
76. 10.1016/0956-7151(91)90173-X10.1016/0956-7151(91)90173-X ↗
77. Roebuck B. Brown L. Banks J. Brooks R. and Evans M.: ‘Miniaturised testing’ NPL report DEPC-MPE 042 2007.
78. 10.1179/174328406X11825810.1179/174328406X118258 ↗
79. 10.1243/03093247JSA22010.1243/03093247JSA220 ↗
80. Evans M., and Wang D.: ‘Stochastic modelling of the small disc creep test’, Mater. ScL TechnoL, 2007, 23, (8), 883–892.
81. Bicego V. Cerutti P. Foulds J. Hurst R. and Matocha K.: ‘Small punch test method for metallic materials part A: a code of practice for small punch creep testing’ CEN CWA21 draft-7: 2005.
82. Matocha K. Abendroth M. and Foulds J.: ‘Small punch test method for metallic materials part B: a code of practice for small punch testing for tensile and fracture behaviour’ CEN CWA21 draft-7: 2005.
83. 10.1111/j.1460-2695.2008.01262.x10.1111/j.1460-2695.2008.01262.x ↗
84. Nonaka I. Kanaya A. Komazaki S. and Kobayashi K.: ‘Activities of micro sample creep testing working group in Japan’ Proc. 2nd Conf. on ‘Creep and fracture in high temperature components’ (ed.Shibli I. A. and Holdsworth S. R.) Zurich Switzerland April 2009 ECCC 1097–1101.
85. 10.1002/9780470291221.ch1510.1002/9780470291221.ch15 ↗
86. 10.4028/www.scientific.net/KEM.409.20110.4028/www.scientific.net/KEM.409.201 ↗
87. Baratta F. I. Quinn G. D. and Matthews W. T.: ‘Errors associated with flexure testing of brittle materials’ Technical report TR 87-35 US Army Materials Technology Laboratory Watertown Mass. USA 1987.
88. 10.1111/j.1151-2916.1991.tb08259.x10.1111/j.1151-2916.1991.tb08259.x ↗
89. 10.1111/j.1460-2695.1997.tb01514.x10.1111/j.1460-2695.1997.tb01514.x ↗
90. 10.1111/j.1151-2916.2000.tb01192.x10.1111/j.1151-2916.2000.tb01192.x ↗
91. 10.1111/j.1151-2916.2003.tb03329.x10.1111/j.1151-2916.2003.tb03329.x ↗
92. 10.1007/s00542-001-0131-010.1007/s00542-001-0131-0 ↗
93. Muller M. Rogner J. Okolo B. Bauer W. and Ritzhaupt-Kleissl H.-J.: ‘Factors influencing the mechanical properties of mould zirconia micro parts’ Proc. 10th Euroceramics Conf. (ed.Heinrich J. G. and Aneziris C.) Baden-Baden Germany June 2007 Goner Verlag 1291–1296.
94. 10.1111/j.1151-2916.1971.tb12263.x10.1111/j.1151-2916.1971.tb12263.x ↗
95. 10.1007/BF0114471610.1007/BF01144716 ↗
96. Morrell R.: ‘Biaxial flexural strength testing of ceramic materials’ Good practice guide no. 12 National Physical Laboratory Teddington UK 1998.
97. 10.1111/j.1151-2916.1971.tb12209.x10.1111/j.1151-2916.1971.tb12209.x ↗
98. Kiibler J. Primas R. and Gut B.: ‘Mechanical strength of thermally aged and cycled thin zirconia sheets’ in ‘Advances in science and technology 3B ceramics: charting the future’ (ed.Vincenzini P.) 923-928; 1995 Faenza Techna Srl.
99. Wachtman J. B.Jr, , Capps W., and Mandel J.: ‘Biaxial flexure tests of ceramic substrates’, J. Mater., 1972, 7, 188–194.
100. Kirstein A. F., and Woolley R. M.: ‘Symmetrical bending of thin circular elastic plates on equally spaced supports’, J. Res. NBS C, 1967, 71C, 1–10.