journal article·2015-06

Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing

J. Gockel, J. Fox, J. Beuth, R. Hafley

Materials Science and Technology· Volume 31· Issue 8
Publisher page

Abstract

In additive manufacturing (AM), melt pool dimension control is needed to accurately build a geometry and determine process precision. Microstructure control is needed for its effect on mechanical properties. This research addresses both for Ti–6Al–4V thin walled structures fabricated by wire feed electron beam AM. Model results show that beam power and beam velocity combinations yielding constant melt pool cross-sectional areas also yield constant solidification cooling rates. Experimental measurements back up this finding and show roughly 20 beta grains across the width of a thin wall deposit which is consistent with an earlier study of single bead deposits, suggesting that links between melt pool geometry and beta grain size are independent of deposition geometry, with significant implications for AM process control.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Carnegie Mellon University Pittsburgh, PA, USA

NASA Langley Research Center Hampton, VA, USA

References (26)

Show source-provided references
1. 10.1007/s11837-001-0067-y10.1007/s11837-001-0067-y ↗
2. Vasinonta A, Beuth J and Griffith M: ‘Process maps for laser deposition of thin-walled structures’, in ‘Solid freeform fabrication proceedings’, 383–391; 1999, Austin, TX, University of Texas at Austin.
3. 10.1115/1.137049710.1115/1.1370497 ↗
4. Vasinonta A, Beuth J and Griffith M: ‘Process map for controlling residual stress and melt pool size in laser-based SFF processes’, in ‘Solid freeform fabrication proceedings’, 200–208; 2000, Austin, TX, University of Texas at Austin.
5. Vasinonta A, Beuth J and Griffith M: ‘Process maps for laser deposition of thin-walled structures’, in ‘Solid freeform fabrication proceedings’, 383–391; 1999, Austin, TX, University of Texas at Austin.
6. 10.1115/1.233585210.1115/1.2335852 ↗
7. Fox J and Beuth J: ‘Process mapping of transient melt pool response in wire feed E-beam additive manufacturing of Ti-6Al-4V’, in ‘Solid freeform fabrication proceedings’, 675–683, 2013, Austin, TX, University of Texas at Austin.
8. Beuth J, Fox J, Gockel J, Montgomery C, Yang R, Qiao H, Soylemez E, Reeseewatt P, Anvari A, Narra S and Klingbeil N: ‘Process mapping for qualification across multiple direct metal additive manufacturing processes’, in ‘Solid freeform fabrication proceedings’, 655–665; 2013, Austin, TX, University of Texas at Austin.
9. Eylon D, NewmanJR and Thorne JK: ‘Metals handbook’, 10th edn, Vol. 2; 1990, Materials Park, OH, ASM International.
10. Lutjering G and Williams JC: ‘Titanium’, 2nd edn; 2007, Berlin, Springer.
11. Donachie M: ‘Titanium: a technical guide’; 2007, Metals Park, OH, ASM.
12. 10.1016/0025-5416(84)90201-510.1016/0025-5416(84)90201-5 ↗
13. 10.1016/S0924-0136(02)00865-810.1016/S0924-0136(02)00865-8 ↗
14. Bontha S and Klingbeil N: ‘Thermal process maps for controlling microstructure in laser-based solid freeform fabrication’, in ‘Solid freeform fabrication proceedings’, 219–226; 2003, Austin, TX, University of Texas at Austin.
15. 10.1016/j.msea.2009.02.01910.1016/j.msea.2009.02.019 ↗
16. 10.1016/j.jmatprotec.2006.03.15510.1016/j.jmatprotec.2006.03.155 ↗
17. 10.1016/S0924-0136(02)00865-810.1016/S0924-0136(02)00865-8 ↗
18. 10.1016/S1359-6462(00)00408-510.1016/S1359-6462(00)00408-5 ↗
19. Beuth J, Klingbeil N and Gockel J: ‘Process mapping of cooling rates and thermal gradient’, PCT/US2013/055422, 2013.
20. Beuth JL: ‘Methods for determing process variable combinations yielding constant melt pool geometry for single bead deposits in direct digital manufacturing’, 6/574, 252, 2011.
21. Gockel J and Beuth J: ‘Understanding Ti-6Al-4V microstructure control in additive manufacturing via process maps’, in ‘Solid freeform fabrication proceedings’, 666–674; 2013, Austin, TX, University of Texas at Austin.
22. Gockel J · Addit. Manuf. · 2014
23. Soylemez E, Beuth J and Taminger K: ‘Controlling melt pool dimensions over a wide range of material deposition rates in electron beam additive manufacturing’, in ‘Solid freeform fabrication proceedings’, 571–582; 2010, Austin, TX, University of Texas at Austin.
24. ‘Standard test methods for determining average grain size’, E112-13, ASTM International, West Conshocken, PA, USA, 2013.
25. Dobranich D and Dykhuizen RC: ‘Scoping thermal calculation of the LENS process’, Internal Report, Sandia National Laboratories, Albuquerque, NM, USA, 1998.
26. Rosenthal D · Trans. ASME · 1946 · 68 · 849