journal article·2015-01Open access

Ultrasonic degassing of aluminium alloys: Basic studies and practical implementation

D. Eskin, N. Alba-Baena, T. Pabel, M. da Silva

Materials Science and Technology· Volume 31· Issue 1

Abstract

Ultrasonic processing is known to be an efficient means of aluminium melt degassing and structure modification with additional benefits of being economical and environment friendly. The present paper reports on the kinetics of ultrasonic degassing and regassing of foundry aluminium alloys and on pilot scale degassing trials. Efficiency of ultrasonic degassing is compared with conventional Ar rotary degassing. Direct measurements of hydrogen concentration in the melt by Foseco Alspek-H probe are used along with reduced pressure test. The effects of ultrasonic processing on porosity are studied using three-dimensional X-ray tomography.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Brunel University, BCAST, Uxbridge UB8 3PH, UK

Tomsk State University, Tomsk 634050 Russia

Universidad Autónoma de Ciudad Juárez, Ciudad Juárez C.P. 32310, Mexico

Austrian Foundry Research Institute (ÖGI), Leoben 8700, Austria

ASCAMM Technology Centre, Cerdanyola del Vallès, Barcelona 08290, Spain

Universitat Autònoma de Barcelona, Cerdanyola del Vallès, Barcelona 08193, Spain

References (17)

Show source-provided references
1. Campbell J: ‘Castings’, 2nd rev. edn; 1993, Oxford, Butterworth-Heinemann Ltd.
2. Waite PD: ‘Improved metallurgical understanding of the ALCAN compact degasser after two years of industrial implementation in aluminum casting plants’, in ‘Light metals 1998’, (ed. Welch B), 791–796; 1998, Warrendale, OH, The Minerals, Metals & Materials Society.
3. 10.1179/13640460422502069610.1179/136404604225020696 ↗
4. 10.1007/BF0264537110.1007/BF02645371 ↗
5. Kapustina OA: ‘Degassing of liquids’, in ‘Physical principles of ultrasonic technology’, (ed. Rozenberg L D), Chap. 5, Vol. 1; 1973, New York, Plenum Press.
6. DobatkinVI, Gabidullin RM, Kolachev BA and Makarov GS: ‘Gases and oxides in wrought aluminium alloys’; 1975, Moscow, Metallurgiya.
7. Eskin GI: ‘Ultrasonic processing of molten aluminium’; 1965, Moscow, Metallurgiya.
8. 10.1201/978149870179210.1201/9781498701792 ↗
9. 10.1016/j.msea.2007.04.04010.1016/j.msea.2007.04.040 ↗
10. 10.1016/j.matlet.2009.01.00910.1016/j.matlet.2009.01.009 ↗
11. 10.1007/BF0266776110.1007/BF02667761 ↗
12. Opie WR · Trans. AIME · 1950 · 188 · 1237
13. 10.1002/9781118663189.ch16210.1002/9781118663189.ch162 ↗
14. Anyalebechi PN: ‘Critical review of reported values of hydrogen diffusion in solid and liquid aluminum and its alloys’, in ‘Light metals 2003’, (ed. Crepeau P N), 857–872; 2003, Warrendale, PA, The Minerals, Metals & Materials Society.
15. Makarov GS: ‘Cleaning of aluminium melt by gases’, 8–24; 1983, Moscow, Metallurgiya.
16. 10.4028/www.scientific.net/MSF.765.27110.4028/www.scientific.net/MSF.765.271 ↗
17. da Silva M · Int. J. Cast Met. Res.