Cyclic hardening, softening, and crack growth during high temperature fatigue
Source abstract
Abstract
High temperature total endurance tests were conducted on two alloys (316L steel and 9Cr–1Mo (wt-%) steel) at 550°C in high strain fatigue under continuous cycling at total strains in the range 0·6–2·0%. The austenitic steel cyclically hardened, whereas the ferritic steel cyclically softened. From striation spacing measurements on fracture surfaces (and to a lesser extent from observations of tensile load drop), it has been possible to correlate progress of the major crack with strategic points on the hardening/softening curves at each strain range. The minimum depth at which striations were measured with confidence was ∼0·04 mm and by establishing growth laws it is demonstrated that this depth was typically achieved by the ‘plateau’ regions for both alloys. By extrapolation of the growth relationships it is concluded that cracking ∼4–20 μm deep has occurred by the end of the earlier rapid hardening and softening phases. MST/1813
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. SKELTON R. P.: in ‘High temperature fatigue: properties and prediction’ (ed. Skelton R. P.) 301-319; 1987 London Elsevier Applied Science.10.1007/978-94-009-3453-5_7 ↗
2. RAYNOR D. and SKELTON R. P.: in ‘Techniques for high temperature fatigue testing’ (ed. Sumner G. and Livesey V. B.) 143-166; 1985 London Elsevier Applied Science.
3. SKELTON R. P.: in ‘Low cycle fatigue’ ASTM STP 942 (ed. Solomon H. D. et al.) 209–235; 1988 Philadelphia PA ASTM.10.1520/STP24484S ↗
4. 10.1179/msc.1977.11.10.43910.1179/msc.1977.11.10.439 ↗
5. KITAMURA T. NAOYA T. and OHTANI R.: in ‘Behaviour of defects at high temperatures’ (ed. Ainsworth R. A. and Skelton R. P.) 47-69; 1993 London MEP Publications.
6. PLUMBRIDGE W. J.: in ‘High temperature fatigue: properties and prediction’ (ed. Skelton R. P.) 177-223; 1987 London Elsevier Applied Science.10.1007/978-94-009-3453-5_4 ↗
7. 10.1243/PIME_PROC_1976_190_034_0210.1243/PIME_PROC_1976_190_034_02 ↗
8. R 5: ‘An assessment procedure for the high temperature response of structures’ BNL report Issue 1 Berkeley Nuclear Laboratories Nuclear Electric plc Berkeley 1990.
9. 10.1111/j.1460-2695.1989.tb00519.x10.1111/j.1460-2695.1989.tb00519.x ↗
10. 10.1179/mst.1991.7.5.42710.1179/mst.1991.7.5.427 ↗
11. THOMAS G. B. and VARMA R. K.: in ‘Harmonisation of testing practice for high temperature materials’ (ed. Loveday M. S. and Gibbons T. B.) 155-185; 1992 London Elsevier Applied Science.
12. PINEAU A.: in ‘Fatigue at high temperature’ (ed. Skelton R. P.) 305-364; 1983 London Elsevier Applied Science.
13. MAGNIN T. COUDREUSE L. and LARDON J. M.: Acta Metall. 1985 19 1487–1490.10.1016/0036-9748(85)90156-5 ↗
14. 10.1016/0956-7151(92)90146-610.1016/0956-7151(92)90146-6 ↗
15. AZARI Z. LEBIENVENU M. and PLUVINAGE G.: in ‘Fatigue haute temperature’ 239-251; 1986 Paris Societe Française de Metallurgie.
16. 10.1016/0036-9748(75)90394-410.1016/0036-9748(75)90394-4 ↗
17. MANSON S. S. and HIRSCHBERG M. H.: in Proc. Ist Int. Conf. on ‘Fracture’ (ed. Yokobori T. et al.) Vol. 1 479–499; 1966 Sendai The Japanese Society for Strength and Fracture of Materials.
18. 10.1016/0036-9748(75)90424-X10.1016/0036-9748(75)90424-X ↗
19. 10.1007/BF0264230510.1007/BF02642305 ↗