Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing
Source abstract
Abstract
Ultrafine grain sizes were produced using hot torsion testing of a 0.11C-1.68Mn-0.20Si wt- steel, with ultrafine ferrite <1 m nucleating intragranularly during testing by dynamic strain induced transformation. A systematic study was made of the effect of isothermal deformation temperature, strain level, strain rate, and accelerated cooling during deformation on the formation of ultrafine ferrite by this process. Decreasing the isothermal testing temperature below the Ae3 temperature led to a greater driving force for ferrite nucleation and thus more extensive nucleation during testing; the formation of Widmanstatten ferrite prior to, or early during, deformation imposed a lower temperature limit. Increasing the strain above that where ferrite first began 0.8 at 675C and a strain rate of 3 s1 increased the intragranular nucleation of ferrite. Strain rate appeared to have little effect on the amount of ferrite formed. However, slower strain rates led to extensive polygonisation of the ferrite formed because more time was available for ferrite recovery. Accelerated cooling during deformation followed by air cooling to room temperature led to a uniform microstructure consisting of very fine ferrite grains and fine spherical carbides located in the grain boundaries regions. Air cooling after isothermal testing led to carbide bands and a larger ferrite grain size.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. G. B. OLSON: 'Encyclopedia of materials science and engineer-ing', 2929— 2931; 1985, Oxford, Pergamon.
2. 10.1179/mst.1993.9.2.13510.1179/mst.1993.9.2.135 ↗
3. 10.1179/03071698080328717010.1179/030716980803287170 ↗
4. R. PRIESTNER: `Thermomechanical processing of austenite', (ed. A. J. DeArdo et al.), 455–466; 1982, Warrendale, PA, TMS.
5. R. K. AMIN and F. B. PICKERING: `Thermomechanical processing of microalloyed austenite', (ed. A. J. DeArdo et al.), 377–403; 1982, Warrendale, PA, TMS.
6. 10.2355/isijinternational1966.27.49210.2355/isijinternational1966.27.492 ↗
7. SUNGHAK L. · Mater. Trans A · 1995 · 26 · 109310.1007/BF02670605 ↗
8. BEYNON J. H. · Mater. Foram · 1992 · 16 · 37 — 42
9. 10.1016/S1359-6462(98)00411-410.1016/S1359-6462(98)00411-4 ↗
10. HURLEY P. J. · Ser. Mater · 1999 · 40 · 433
11. HURLEY P. J. · Mater. Sci Forum · 1998 · 284
12. J. S. KIRKALDY, B. A. THOMSON, and E. A. BAGANIS: 'Harden-ability concept with applications to steels', (ed. D. V. Doan and J. S. Kirkaldy), 82–125; 1978, Warrendale, PA, AIME.
13. 10.1088/0022-3735/6/8/01210.1088/0022-3735/6/8/012 ↗
14. FIELDS D. S. · ASTM PrOC · 1957 · 57 · 1259
15. P. D. HODGSON: 'Mathematical modelling of recrystallisation processes during the hot rolling of steel', PhD thesis, Univerisity of Queensland, Brisbane, Australia, 1992.
16. 10.1016/S0921-5093(96)10475-510.1016/S0921-5093(96)10475-5 ↗
17. P. J. HURLEY: 'Production of ultra-fine ferrite during thermo-mechanical processing of steels', PhD thesis, Monash Uni-versity, Melbourne, Australia, 1999.
18. ABE T. · Tetsu to Hagané · 1988 · 74 · 505— 512