journal article·2008-08

Wrought magnesium alloys for structural applications

D. Letzig, J. Swiostek, J. Bohlen, P. A. Beaven, K. U. Kainer

Materials Science and Technology· Volume 24· Issue 8
Publisher page

Abstract

Wrought magnesium alloys are of special interest as lightweight structural components as a result of their more homogeneous microstructures and improved mechanical properties compared to cast components. Extrusion as a shaping technology offers the possibility to produce a wide variety of magnesium alloy profiles. In this contribution, the authors describe the role of extrusion parameters such as extrusion rate, ratio and temperature as well as the type of extrusion process on the microstructure of AZ series magnesium alloys and the resulting mechanical properties. The effect of microstructure on the tensile/compression deformation behaviour of the alloys has also been investigated. In a further step, extruded material has been used in die forging experiments. Aspects of alloy development and process optimisation designed to overcome technical and economic limitations and thus establish magnesium alloy profiles for industrial applications will also be discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Beck A. ‘Magnesium und seiner Legierungen’; 1939, Berlin, Springer-Verlag.
2. den Bakker A. · 2004
3. Barton G.: Proc. 6th Int. Conf. on ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 324-330; 2004, Weinheim, Wiley-VCH.
4. Emley E. F. ‘Principles of magnesium technology’; 1966, Oxford, Pergamon Press.
5. Miiller K. B.: in ‘Magnesium technology 2002’, (ed.Kaplan H. I.), 187-192; 2002, Warrendale, PA, TMS.
6. Lass J.F., Metz A., Wappelhorst M., Hombergsmeier E., Lanzerath H., Baumgart P., and Cordini P.: Proc. 6th Int. Conf. on ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 1026-1033; 2004, Weinheim, Wiley-VCH.10.1002/3527603565.ch159 ↗
7. Sillekens W. H., and Bohlen J.: Proc. 6th Int. Conf. on ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 1046-1051; 2004, Weinheim, Wiley-VCH.10.1002/3527603565.ch162 ↗
8. 10.1016/S0890-6955(01)00149-310.1016/S0890-6955(01)00149-3 ↗
9. Avedesian M. M. and H. Baker (eds.): ‘Magnesium and magnesium alloys’; 1999, Materials Park, OH, ASM International.
10. 10.1016/j.jallcom.2003.10.10210.1016/j.jallcom.2003.10.102 ↗
11. Watanabe H. · Scr. Mater · 2002 · 46
12. Galiyew A. M., Kaibyshev R. O., and Gottstein G.: in ‘Magnesium technology 2002’, (ed.Kaplan H. I.), 181-185; 2002, Warrendale, PA, TMS.
13. 10.1016/S0921-5093(96)10469-X10.1016/S0921-5093(96)10469-X ↗
14. 10.4028/www.scientific.net/MSF.482.38710.4028/www.scientific.net/MSF.482.387 ↗
15. Bohlen J., Swiostek J., Sillekens W. H., Vet P.J., Letzig D., and Kainer K. U.: in ‘Magnesium technology 2005’, (ed.Neelameggham N. R. et al), 241-246; 2005, Warrendale, PA, TMS.
16. Bohlen J., Swiostek J., Brokmeier H.G., Letzig D., and Kainer K. U.: in ‘Magnesium technology 2006’, (ed.Luo A. A. et al), 213-217; 2006, Warrendale, PA, TMS.
17. Fischer G.: Proc. Conf. on ‘Magnesium im Fahrzeugbau’, Sindelfingen, Germany, April 2003, IIR Deutschland GmbH, Paper 11.
18. 10.1515/pm-2004-41050510.1515/pm-2004-410505 ↗
19. Davies C. H. J., Xiong F., and Battaini M.: in ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 433-438; 2003, Weinheim, Wiley-VCH.10.1002/3527603565.ch68 ↗
20. Partridge P. G. · Met. Mater · 1967 · 1 · 169
21. Barnett M. R., Keshavarz Z., Beer A. G., and Atwell D.: Acta Mater. 2004, 52, 5093–5103.10.1016/j.actamat.2004.07.015 ↗