journal article·2015-07

Growth direction and Si alloying affecting directionally solidified structures of Al–Cu–Si alloys

T. A. Costa, A. L. Moreira, D. J. Moutinho, M. Dias, I. L. Ferreira, J. E. Spinelli, O. L. Rocha, A. Garcia

Materials Science and Technology· Volume 31· Issue 9
Publisher page

Abstract

The roles of growth direction and Si content on the columnar/equiaxed transition and on dendritic spacings of Al–Cu–Si alloys still remain as an open field to be studied. In the present investigation, Al–6 wt-Cu–4 wt-Si and Al–6 wt-Cu alloys were directionally solidified upwards and horizontally under transient heat flow conditions. The experimental results include tip growth rate and cooling rates, optical microscopy, scanning electron microscopy energy dispersive spectrometry and dendrite arm spacings. It was found that silicon alloying contributes to significant refinement of primary/secondary dendritic spacings for the upward configuration as compared with corresponding results of the horizontal growth. Experimental growth laws are proposed, and the effects of the presence/absence of solutal convection in both growth directions are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials and Manufacturing Engineering, University of Campinas, UNICAMP, 13083-970 Campinas, SP, Brazil

Faculty of Mechanical Engineering, Federal University of Pará, UFPA, Augusto Corrêa Avenue 1, 66075-110, Belém, PA, Brazil

Federal Institute of Education, Science and Technology of Pará, IFPA, Almirante Barroso Avenue 1155, 66093-020, Belém, PA, Brazil

Department of Mechanical Engineering, Fluminense Federal University, Av. dos Trabalhadores, 420-27255-125 – Volta Redonda, RJ, Brazil

Department of Materials Engineering, Federal University of São Carlos, UFSCar, 13565-905, São Carlos, SP, Brazil

References (34)

Show source-provided references
1. Rooy EL: in ‘Casting’, 9th edn – ASM Handbook, vol. 15, ‘Aluminum and aluminum alloys’, 743–770; 1998, Materials Park, OH, ASM International.
2. Dobrzański LA · J. Achievements Mater. Manuf. Eng. · 2006 · 18 · 211
3. Mathiesen RH · Metall. Mater. Trans. A · 2010 · 42 · 17010.1007/s11661-010-0443-8 ↗
4. 10.1016/j.msea.2006.03.01910.1016/j.msea.2006.03.019 ↗
5. 10.1016/j.jmatprotec.2004.09.09010.1016/j.jmatprotec.2004.09.090 ↗
6. 10.1179/1743284713Y.000000030310.1179/1743284713Y.0000000303 ↗
7. 10.1016/j.matchemphys.2009.08.06310.1016/j.matchemphys.2009.08.063 ↗
8. 10.1016/j.matchar.2009.11.01210.1016/j.matchar.2009.11.012 ↗
9. 10.1016/j.crme.2007.05.01010.1016/j.crme.2007.05.010 ↗
10. 10.1016/S1468-6996(01)00047-X10.1016/S1468-6996(01)00047-X ↗
11. 10.1016/j.actamat.2008.07.04610.1016/j.actamat.2008.07.046 ↗
12. 10.1007/BF0264895010.1007/BF02648950 ↗
13. 10.1007/s11663-997-0039-x10.1007/s11663-997-0039-x ↗
14. 10.1016/j.matchemphys.2011.11.03310.1016/j.matchemphys.2011.11.033 ↗
15. 10.1016/S0921-5093(01)01649-510.1016/S0921-5093(01)01649-5 ↗
16. 10.1016/j.matchemphys.2013.11.03010.1016/j.matchemphys.2013.11.030 ↗
17. 10.1016/S0921-5093(02)00581-610.1016/S0921-5093(02)00581-6 ↗
18. 10.1007/s11661-003-0229-310.1007/s11661-003-0229-3 ↗
19. 10.1007/s11661-008-9542-110.1007/s11661-008-9542-1 ↗
20. 10.1007/BF0267368810.1007/BF02673688 ↗
21. 10.1016/j.commatsci.2010.07.00610.1016/j.commatsci.2010.07.006 ↗
22. 10.1016/S0921-5093(04)00831-710.1016/S0921-5093(04)00831-7 ↗
23. 10.1007/BF0264660510.1007/BF02646605 ↗
24. 10.1007/s11661-001-0050-910.1007/s11661-001-0050-9 ↗
25. 10.1007/s11661-000-0096-010.1007/s11661-000-0096-0 ↗
26. 10.1590/S1516-1439201300500007210.1590/S1516-14392013005000072 ↗
27. Jácome PAD: ‘Numerical modeling of the transient solidification process of ternary alloys: solute segregation and microporosity formation’, PhD thesis, Federal Fluminense University –UFF, Volta Redonda, Rio de Janeiro, Brazil, 2012
28. 10.1016/j.jallcom.2010.04.24410.1016/j.jallcom.2010.04.244 ↗
29. Curreri PA · Metall. Trans. A · 1998 · 19 · 267110.1007/BF02645800 ↗
30. 10.1016/S1006-7191(06)62080-210.1016/S1006-7191(06)62080-2 ↗
31. 10.1016/j.msea.2012.02.07310.1016/j.msea.2012.02.073 ↗
32. 10.1016/j.jmatprotec.2005.03.00910.1016/j.jmatprotec.2005.03.009 ↗
33. 10.1016/S1359-6454(99)00188-310.1016/S1359-6454(99)00188-3 ↗
34. 10.1007/s11661-010-0183-910.1007/s11661-010-0183-9 ↗