journal article·2013-01Open access

Contemporary approaches to reducing weld induced residual stress

H E Coules

Materials Science and Technology· Volume 29· Issue 1

Abstract

Self-equilibrating residual stresses may occur in materials in the absence of external loading due to internal strain inhomogeneity. While favourable distributions of residual stress can bestow an object with the appearance of superior material properties, most welding processes leave behind residual stresses in particularly unfavourable patterns, causing a greater susceptibility to fracture based failure mechanisms and unintended deformation. Currently, heat treatment is the primary means of removing these stresses, but since the formation of residual stress is dependent upon many material and process factors, there are several other viable mechanisms (using thermal, mechanical or phase transformation effects) by which it may be modified. It is only now, using relevant advances in numerical and experimental methods, that these techniques are being fully explored. This article gives a brief introduction to weld induced residual stresses and reviews the current state of the art with regard to their reduction. Emphasis is placed on the recent development of unconventional techniques, and the mechanisms by which they act.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Welding Engineering Research Centre, Cranfield University, Cranfield, Bedfordshire, MK43 0AL, UK

References (100+)

Show source-provided references
1. 10.1088/0034-4885/70/12/R0410.1088/0034-4885/70/12/R04 ↗
2. 10.1016/j.crhy.2007.09.01510.1016/j.crhy.2007.09.015 ↗
3. 10.1080/1023816041000173450410.1080/10238160410001734504 ↗
4. 10.1016/j.actamat.2003.12.03510.1016/j.actamat.2003.12.035 ↗
5. 10.1179/02670830110150998010.1179/026708301101509980 ↗
6. 10.1007/978-0-387-30877-7_1510.1007/978-0-387-30877-7_15 ↗
7. Messler RW: ‘Joining of advanced materials’; 1993, Stoneham, MA, Butterworth Heinemann.
8. Kou S: ‘Welding metallurgy’, 122–141; 2003, New York, Wiley.10.1002/0471434027 ↗
9. 10.1016/j.ijpvp.2007.10.00410.1016/j.ijpvp.2007.10.004 ↗
10. Masubuchi K:in ‘Encyclopedia of materials: science and technology’(, Buschow K H J, et al.), 8121–8126; 2001, London, Elsevier.
11. 10.1179/136217109X40693810.1179/136217109X406938 ↗
12. Bhadeshia H:in ‘Handbook of residual stress and deformation of steel’(, Totten G, et al. 3–10; 2002, Materials Park, OH, ASM International.
13. 10.1016/j.msea.2007.12.04210.1016/j.msea.2007.12.042 ↗
14. Radaj D: ‘Welding residual stress and distortion: calculation and measurement’; 2003, Düsseldorf, DVS Verlag.
15. 10.1016/j.msea.2008.09.07810.1016/j.msea.2008.09.078 ↗
16. 10.1016/j.msea.2008.01.08510.1016/j.msea.2008.01.085 ↗
17. 10.1080/0149573015050044210.1080/01495730150500442 ↗
18. 10.1016/j.cma.2005.08.01810.1016/j.cma.2005.08.018 ↗
19. 10.1115/1.271674010.1115/1.2716740 ↗
20. 10.1179/1362171811Y.000000001710.1179/1362171811Y.0000000017 ↗
21. 10.1179/174328407X23652610.1179/174328407X236526 ↗
22. Lindgren L.E: ‘Computational welding mechanics’; 2007, Cambridge, UK, Woodhead Publishing.10.1533/9781845693558 ↗
23. Goldak JA, Akhlaghi M: ‘Computational welding mechanics’; 2005, New York, Springer.
24. 10.1016/B978-0-08-022714-6.50009-510.1016/B978-0-08-022714-6.50009-5 ↗
25. 10.1007/978-3-642-48640-110.1007/978-3-642-48640-1 ↗
26. 10.4028/www.scientific.net/MSF.404-407.21510.4028/www.scientific.net/MSF.404-407.215 ↗
27. Hellan K: ‘Introduction to fracture mechanics’; 1985, New York, McGraw-Hill.
28. 10.1016/0013-7944(92)90156-910.1016/0013-7944(92)90156-9 ↗
29. 10.1016/j.engfracmech.2006.08.01210.1016/j.engfracmech.2006.08.012 ↗
30. 10.1016/j.engfracmech.2007.06.01410.1016/j.engfracmech.2007.06.014 ↗
31. 10.1016/j.engfailanal.2006.02.01110.1016/j.engfailanal.2006.02.011 ↗
32. 10.1243/030932400151443110.1243/0309324001514431 ↗
33. 10.1201/978142005821510.1201/9781420058215 ↗
34. 10.1016/j.engfracmech.2007.10.00510.1016/j.engfracmech.2007.10.005 ↗
35. 10.1016/j.engfracmech.2010.03.00710.1016/j.engfracmech.2010.03.007 ↗
36. 10.1111/j.1460-2695.2007.01102.x10.1111/j.1460-2695.2007.01102.x ↗
37. 10.1016/S0924-0136(97)00213-610.1016/S0924-0136(97)00213-6 ↗
38. 10.1016/j.ijpvp.2007.10.00510.1016/j.ijpvp.2007.10.005 ↗
39. 10.1016/0142-1123(95)00117-410.1016/0142-1123(95)00117-4 ↗
40. 10.1016/S0142-1123(01)00133-510.1016/S0142-1123(01)00133-5 ↗
41. Maddox SJ: ‘Fatigue strength of welded structures’, 2nd edn; 1991, Cambridge, Abington Publishing.
42. 10.1007/s11661-000-0136-910.1007/s11661-000-0136-9 ↗
43. 10.1016/0013-7944(96)00024-010.1016/0013-7944(96)00024-0 ↗
44. 10.4028/www.scientific.net/MSF.681.5510.4028/www.scientific.net/MSF.681.55 ↗
45. Jones RH: in ‘Stress-corrosion cracking’, (ed. , Jones R H, Ricker R E); 1992, Materials Park, OH, ASM International.
46. 10.1179/174328407X21311610.1179/174328407X213116 ↗
47. 10.1016/S0029-5493(00)00414-310.1016/S0029-5493(00)00414-3 ↗
48. 10.1016/S0029-5493(97)00131-310.1016/S0029-5493(97)00131-3 ↗
49. 10.1046/j.1460-2695.1998.00049.x10.1046/j.1460-2695.1998.00049.x ↗
50. 10.1007/978-94-009-3489-410.1007/978-94-009-3489-4 ↗
51. 10.1016/j.ijsolstr.2006.11.03710.1016/j.ijsolstr.2006.11.037 ↗
52. 10.1179/174329305X2946510.1179/174329305X29465 ↗
53. 10.5957/jsp.2004.20.1.4310.5957/jsp.2004.20.1.43 ↗
54. McPherson NA · Weld. J. · 2010 · 89 · 30
55. 10.1016/0143-974X(88)90041-710.1016/0143-974X(88)90041-7 ↗
56. Masubuchi K · Weld. Res. Abroad · 1996 · 43 · 2
57. 10.1179/136217109X41241810.1179/136217109X412418 ↗
58. 10.1179/174329305X4830110.1179/174329305X48301 ↗
59. 10.1016/S0045-7949(02)00447-910.1016/S0045-7949(02)00447-9 ↗
60. Deng D · Trans. JWRI · 2001 · 30 · 89
61. 10.5957/jsp.1997.13.2.8310.5957/jsp.1997.13.2.83 ↗
62. 10.1016/j.commatsci.2009.01.00410.1016/j.commatsci.2009.01.004 ↗
63. 10.1016/j.matdes.2011.08.02210.1016/j.matdes.2011.08.022 ↗
64. 10.1016/j.ijpvp.2007.10.00710.1016/j.ijpvp.2007.10.007 ↗
65. 10.1007/s11340-009-9285-y10.1007/s11340-009-9285-y ↗
66. Schajer GS · Exp. Mech. · 2010 · 50 · 59
67. 10.1115/1.134552610.1115/1.1345526 ↗
68. 10.1007/s11340-010-9386-710.1007/s11340-010-9386-7 ↗
69. 10.1016/S0963-8695(97)00023-610.1016/S0963-8695(97)00023-6 ↗
70. 10.1179/1743284710Y.000000002910.1179/1743284710Y.0000000029 ↗
71. Reimers W · J. Nondestr. Eval. · 1998 · 17 · 129
72. 10.1007/978-0-387-30877-7_2810.1007/978-0-387-30877-7_28 ↗
73. Feng Z: ‘Processes and mechanisms of welding residual stress and distortion’; 2005, Cambridge, Woodhead Publishing.10.1533/9781845690939 ↗
74. Williams SW, Steuwer A: in ‘Friction stir welding: from basics to applications’, (ed. , Lohwasser D, Chen Z); 2010, Cambridge, Woodhead Publishing.10.1533/9781845697716.2.215 ↗
75. Altenkirch J: Stress engineering of friction stir welding: measurement and control of welding residual stresses’, PhD thesis, University of Manchester, Manchester, UK, 2009.
76. PavlovskyVI, Masubuchi K: Bulletin 388, Welding Research Council, 1994.
77. 10.1179/stw.1998.3.6.26710.1179/stw.1998.3.6.267 ↗
78. 10.1016/S1359-6462(02)00537-710.1016/S1359-6462(02)00537-7 ↗
79. 10.1016/j.jmatprotec.2004.04.32510.1016/j.jmatprotec.2004.04.325 ↗
80. 10.1179/174329305X4837410.1179/174329305X48374 ↗
81. 10.1016/j.engfailanal.2009.06.01610.1016/j.engfailanal.2009.06.016 ↗
82. 10.1533/978184569881210.1533/9781845698812 ↗
83. Bleck W: ‘Material science of steel, textbook for RWTH students’; 2007, Aachen, Verlag Mainz.
84. 10.1016/0308-0161(85)90040-710.1016/0308-0161(85)90040-7 ↗
85. 10.1016/j.ijpvp.2003.08.00410.1016/j.ijpvp.2003.08.004 ↗
86. 10.1016/0308-0161(87)90012-310.1016/0308-0161(87)90012-3 ↗
87. 10.1016/j.jmatprotec.2005.06.01810.1016/j.jmatprotec.2005.06.018 ↗
88. 10.1179/imr.1990.35.1.21710.1179/imr.1990.35.1.217 ↗
89. 10.1016/S0924-0136(96)02727-610.1016/S0924-0136(96)02727-6 ↗
90. 10.1016/S0142-1123(02)00022-110.1016/S0142-1123(02)00022-1 ↗
91. 10.1016/j.ijfatigue.2003.08.02010.1016/j.ijfatigue.2003.08.020 ↗
92. 10.1016/S0142-1123(00)00110-910.1016/S0142-1123(00)00110-9 ↗
93. 10.1016/S0142-1123(98)00045-010.1016/S0142-1123(98)00045-0 ↗
94. 10.1016/0142-1123(95)00044-T10.1016/0142-1123(95)00044-T ↗
95. 10.1016/S0951-8339(99)00013-110.1016/S0951-8339(99)00013-1 ↗
96. Nitschke-Pagel T, Dilger K: Proc. 20th Int. Offshore and Polar Engineering Conf. Beijing, China, June 2010, ISOPE, 269–274.
97. 10.1111/j.1559-3584.1943.tb02307.x10.1111/j.1559-3584.1943.tb02307.x ↗
98. Gnirss G · Weld. World · 1988 · 26 · 284
99. 10.1111/j.1460-2695.1996.tb01315.x10.1111/j.1460-2695.1996.tb01315.x ↗
100. 10.1243/PIME_PROC_1995_209_228_0210.1243/PIME_PROC_1995_209_228_02 ↗