journal article·1988-09

Hydrogen and temper embrittlement in 9Cr–1Mo steel

C. A. Hippsley, N. P. Haworth

Publisher page

Abstract

The synergism between hydrogen embrittlement and temper embrittlement has been investigated in a 9Cr–1Mo martensitic steel. Measurements of tensile ductility were used to monitor the development of embrittlement with increasing hydrogen content in material as tempered and aged for up to 5000 h at 500 or 550°C. A detailed examination was made of associated changes in fracture mechanism, precipitate microstructure, and interfacial and precipitate chemistry. A strong interaction between hydrogen and temper embrittlement was observed. Both types of embrittlement in isolation reduced tensile ductility by promoting a ductile interlath fracture mechanism: ‘chisel fracture’. Hydrogen and temper embrittlement acted synergistically to reduce ductility further by the promotion of brittle intergranular fracture and transgranular cleavage. The dominant factor controlling the interaction was the precipitation of a brittle intermetallic Laves phase containing phosphorus in solution. Phosphorus segregated to interfaces was considered to make an important, but secondary, contribution to the embrittlement observed. MST/791
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. MURALL J.: Oil Gas J., June 1984, 66.
2. SALKIN IL: Pet. Eng. Int., April 1984, 56.
3. FUJITA T.: Met. Prog., Aug. 1986, 33.
4. ANDERKO K. DAVID K. OHLY W. SCHIRRA M. and WASSILEW C.: in Terrific alloys for use in nuclear techniques’ 299; 1983 Snowbird UT USA.
5. HARRIES D. R.: in Terrific alloys for use in nuclear techniques’ 141; 1983 Snowbird UT USA.
6. BRIANT C. L., and BANERJI S. K.: Int. Met. Rev., 1978, 23, (4), 164.
7. 10.1016/0025-5416(76)90075-610.1016/0025-5416(76)90075-6 ↗
8. WALL M.: PhD thesis Imperial College of Science and Technology 1985.
9. KURAHASHI H. KURISU T. SONE Y. WADA K. and NAKAI Y.: in Proc. Conf. ‘Corrosion 84’ April 1984 paper 212.
10. KIESHEYER H., and LENNARTZ G.: UK National Corrosion Conference, 69; London, November 1982.
11. 10.1016/0022-3115(79)90391-X10.1016/0022-3115(79)90391-X ↗
12. 10.1007/BF0264410310.1007/BF02644103 ↗
13. BANDYOPADHYAY N. KAMEDA J. and McMAHON C. J. JR: Metall. Trans. 1983 14A 7.10.1007/BF02664814 ↗
14. 10.1179/mst.1987.3.11.91210.1179/mst.1987.3.11.912 ↗
15. HAWORTH N. P. and HIPPSLEY C. A.: ‘The influence of HAZ microstructure on ductility and hydrogen embrittlement in 9Cr—lMo steel’ UKAEA report AERE R-11473 Harwell Laboratory 1985.
16. WALL M.: ‘A review of thermal ageing effects in high chromium ferritic steels’ UKAEA report R-12812 Harwell Laboratory 1987.
17. TITCHMARSH J. M. WALL M. and EDWARDS B. C.: in Proc. 4th Workshop on ‘Analytical electron microscopy’ Lehigh University USA July 1984.
18. DRUCE S. G. GAGE G. and JORDAN G.: Acta Metall. 1986 34 641.10.1016/0001-6160(86)90179-3 ↗
19. McLEAN D.: ‘Grain boundaries in metals’; 1957 Oxford Clarendon Press.
20. VATTER I. A. and TITCHMARSH J. M.: ‘Scanning transmission electron microscope investigation of boundary composition in 9Cr—lMo ferritic steel’ UKAEA report R-I2562 Harwell Laboratory 1987.
21. LAURENT J. P. LAPASSET G. AUCOUTURIER M. and LACOMBE P.: in ‘Hydrogen in metals’ (ed. Bernstein I. M. and Thompson A. W.) 559; 1974 Metals Park OH ASM.
22. 10.1007/BF0265470010.1007/BF02654700 ↗
23. PRESSOUYRE G. M.: in ‘Hydrogen effects in metals’ (ed. Bernstein I. M. and Thompson A. W.) 27; 1981 New York AIME.
24. 10.1016/0036-9748(84)90513-110.1016/0036-9748(84)90513-1 ↗
25. LYNCH S. P. and RYAN N. E.: in Proc. 2nd. Int. Congress on ‘Hydrogen in metals’ Paris June 1977 paper 3D12.
26. MESSMER R. P. and BRIANT C. L.: in ‘Hydrogen embrittlement’ (ed. Hirth J. P. et al.); 1985.
27. 10.1007/BF0264411810.1007/BF02644118 ↗
28. LATANISION R. M., and OPPERHAUSER H.: Metall. Trans., 1975, 6A, 223.10.1007/BF02673702 ↗
29. 10.1007/BF0265991910.1007/BF02659919 ↗
30. ‘Sulphide stress cracking resistant materials for oilfield equipment’ NACE standard MR- 01-75 (1980 revision).
31. LECHTENBERG T. GARRISON W. M. and HYZAK J. M.: in Terrific alloys for use in nuclear techniques’ 365; 1983 Snowbird UT USA.
32. JONES R. H. and THOMAS M. T.: in Terrific alloys for use in nuclear techniques’ 395; 1983 Snowbird UT USA.