Grain growth and stabilisation of nanostructured aluminium at high temperatures: Review
Source abstract
Abstract
Nanostructured (NS) materials have a large stored energy due to their large grain boundary area and thus tend to be unstable with respect to grain growth during high temperature annealing or deformation. This problem can limit the application of NS materials at high temperatures (>0·5 Tm, absolute melting temperature), especially Al alloys owing to their low melting points. Restoration processes and grain growth in NS Al based materials are critically reviewed, with emphasis on nanostructure grain stabilisation at high temperatures. The mechanisms of normal and abnormal grain growth during isothermal annealing are presented, followed by consideration of thermal stabilisation by the addition of solute atoms/impurities and/or dispersion of second phase particles. Grain growth is significantly facilitated by applying deformation at elevated temperatures during preparation or further processing of semifinished NS materials. The dynamic restoration processes, dynamic grain growth and dynamic particle coarsening are addressed in NS Al. Finally, grain growth during consolidation of nanocrystalline powders (one of the principal methods to fabricate bulk NS Al) is presented, and the effects of processing parameters on grain size stabilisation are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering University of Tabriz, Tabriz 51666-16471, Iran
Mechanical Engineering Concordia University, Montreal, Canada
References (100+)
Show source-provided references
1. 10.1016/j.actamat.2003.08.03210.1016/j.actamat.2003.08.032 ↗
2. 10.1016/j.pmatsci.2005.08.00310.1016/j.pmatsci.2005.08.003 ↗
3. 10.1023/A:101102690098910.1023/A:1011026900989 ↗
4. Chow G.M and Kurihara LK: in ‘Nanostructured materials: processing, properties, and applications’, (ed. Koch C C), 3–50; 2002, Norwich, NY, William Andrew Publishing.
5. Hahn H: in’ Nanomaterials by severe plastic deformation- NANOSPD2’, (ed. Zehetbauer M and Valiev R Z), 3–17; 2002, Vienna, Austria, Wiley-VCH.
6. Koch CC · Rev. Adv. Mater. Sci. · 2003 · 5 · 91
7. 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
8. 10.1007/s11661-010-0510-110.1007/s11661-010-0510-1 ↗
9. 10.1016/0965-9773(93)90180-J10.1016/0965-9773(93)90180-J ↗
10. 10.1016/0079-6425(89)90001-710.1016/0079-6425(89)90001-7 ↗
11. 10.1016/j.jallcom.2006.08.32910.1016/j.jallcom.2006.08.329 ↗
12. 10.1007/s11661-009-0005-010.1007/s11661-009-0005-0 ↗
13. 10.1016/S0921-5093(01)01416-210.1016/S0921-5093(01)01416-2 ↗
14. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
15. 10.1016/j.pmatsci.2008.03.00210.1016/j.pmatsci.2008.03.002 ↗
16. Polmear IJ: ‘Light alloys—metallurgy of the light metals’; 1995, London, Arnold.
17. 10.1016/j.msea.2012.09.02010.1016/j.msea.2012.09.020 ↗
18. 10.1002/adem.20040021910.1002/adem.200400219 ↗
19. 10.1016/j.pmatsci.2005.04.00410.1016/j.pmatsci.2005.04.004 ↗
20. 10.1179/imr.1995.40.2.4110.1179/imr.1995.40.2.41 ↗
21. G. I. Taylor: ‘Plastic strain in metals’, J. Inst. Metals, 1938, 62, 307–324.
22. H. J. McQueen: ‘Mechanisms in creep and hot working to high strain; microstructural evidence, inconsistencies. Part I: substructure evolution; grain interactions’, Metall. Sci. Tech., 2010, 28, 12–21.
23. H. J. McQueen: ‘Mechanisms In Creep And Hot Working To High Strain; Microstructural Evidence, Inconsistencies Part II: Contrasts In Hot Worked Microstructures: EOM, POM, XRD, TEM, STEM, SEM-EBSI AND OIM’, Metall. Sci. Tech., 2010, 28, 25–32.
24. 10.1007/BF0160540510.1007/BF01605405 ↗
25. 10.1016/0956-716X(93)90472-510.1016/0956-716X(93)90472-5 ↗
26. 10.1016/j.msea.2005.08.04810.1016/j.msea.2005.08.048 ↗
27. 10.1179/cmq.1995.34.3.21910.1179/cmq.1995.34.3.219 ↗
28. 10.1016/1044-5803(95)00062-310.1016/1044-5803(95)00062-3 ↗
29. McQueen HJ · Mater. Sci. Eng. · 1988 · 101 · 149
30. 10.1179/174328407X16117810.1179/174328407X161178 ↗
31. 10.1016/S0921-5093(00)00933-310.1016/S0921-5093(00)00933-3 ↗
32. 10.1017/CBO978110729555110.1017/CBO9781107295551 ↗
33. 10.1557/JMR.1992.175110.1557/JMR.1992.1751 ↗
34. 10.1016/S1359-6454(03)00083-110.1016/S1359-6454(03)00083-1 ↗
35. 10.1007/s11661-005-0250-910.1007/s11661-005-0250-9 ↗
36. 10.1016/S1359-6454(02)00318-X10.1016/S1359-6454(02)00318-X ↗
37. 10.1021/ac60131a04510.1021/ac60131a045 ↗
38. 10.1007/s11661-006-0044-810.1007/s11661-006-0044-8 ↗
39. 10.1016/S1359-6454(99)00285-210.1016/S1359-6454(99)00285-2 ↗
40. 10.1016/0965-9773(95)00086-010.1016/0965-9773(95)00086-0 ↗
41. 10.1016/j.scriptamat.2004.05.01410.1016/j.scriptamat.2004.05.014 ↗
42. 10.1007/s10853-010-4768-x10.1007/s10853-010-4768-x ↗
43. Beck PA · Trans. AIME · 1948 · 175 · 372
44. 10.1007/BF0270908810.1007/BF02709088 ↗
45. 10.1016/j.msea.2003.08.03910.1016/j.msea.2003.08.039 ↗
46. 10.1007/s10853-008-2808-610.1007/s10853-008-2808-6 ↗
47. 10.1016/j.actamat.2007.01.04710.1016/j.actamat.2007.01.047 ↗
48. 10.1016/1359-6454(95)00395-910.1016/1359-6454(95)00395-9 ↗
49. 10.1007/s11661-001-0060-710.1007/s11661-001-0060-7 ↗
50. 10.1016/S1359-6454(01)00446-310.1016/S1359-6454(01)00446-3 ↗
51. 10.1007/s10853-011-5659-510.1007/s10853-011-5659-5 ↗
52. 10.1557/JMR.2001.013310.1557/JMR.2001.0133 ↗
53. 10.1016/S0921-5093(00)01151-510.1016/S0921-5093(00)01151-5 ↗
54. 10.1557/JMR.2001.047410.1557/JMR.2001.0474 ↗
55. 10.1016/S1359-6462(01)00826-010.1016/S1359-6462(01)00826-0 ↗
56. 10.1016/j.jallcom.2012.02.18110.1016/j.jallcom.2012.02.181 ↗
57. 10.1016/S0921-5093(98)01136-810.1016/S0921-5093(98)01136-8 ↗
58. 10.1007/s11661-000-0011-810.1007/s11661-000-0011-8 ↗
59. 10.1016/j.matchar.2005.08.00510.1016/j.matchar.2005.08.005 ↗
60. 10.1016/j.msea.2012.06.06810.1016/j.msea.2012.06.068 ↗
61. 10.1007/s11661-005-0307-910.1007/s11661-005-0307-9 ↗
62. 10.1016/S1359-6454(03)00433-610.1016/S1359-6454(03)00433-6 ↗
63. 10.1016/j.compscitech.2011.09.00110.1016/j.compscitech.2011.09.001 ↗
64. 10.1016/j.msea.2010.04.03210.1016/j.msea.2010.04.032 ↗
65. 10.1007/s10853-008-2870-010.1007/s10853-008-2870-0 ↗
66. 10.1016/S1359-6454(97)00070-010.1016/S1359-6454(97)00070-0 ↗
67. 10.1016/S1359-6454(03)00075-210.1016/S1359-6454(03)00075-2 ↗
68. 10.1016/j.scriptamat.2009.02.01510.1016/j.scriptamat.2009.02.015 ↗
69. Burke JE · Trans. TMS-AIME · 1949 · 180 · 73
70. Vojtech D · Metalurjica · 2010 · 49 · 181
71. Liu F and Gong M: in ‘Sintering: mechanisms of convention nanodensification and field assisted processes’, (ed. Castro R and Benthem K), Vol. 35, 35–55; 2013, Berlin, Springer.10.1007/978-3-642-31009-6_3 ↗
72. 10.1016/0001-6160(62)90092-510.1016/0001-6160(62)90092-5 ↗
73. 10.1016/0001-6160(73)90186-710.1016/0001-6160(73)90186-7 ↗
74. 10.1016/0001-6160(76)90108-510.1016/0001-6160(76)90108-5 ↗
75. 10.1016/0001-6160(57)90109-810.1016/0001-6160(57)90109-8 ↗
76. 10.1016/0001-6160(71)90041-110.1016/0001-6160(71)90041-1 ↗
77. 10.1016/S1359-6454(99)00079-810.1016/S1359-6454(99)00079-8 ↗
78. 10.1016/S1359-6462(00)00359-610.1016/S1359-6462(00)00359-6 ↗
79. 10.1016/B978-008044164-1/50011-610.1016/B978-008044164-1/50011-6 ↗
80. Smith CS · Trans. Am. Inst. Min. Metall. Pet. Eng. · 1948 · 175 · 15
81. 10.1016/j.jallcom.2012.02.09810.1016/j.jallcom.2012.02.098 ↗
82. 10.1016/S1359-6454(01)00368-810.1016/S1359-6454(01)00368-8 ↗
83. 10.1016/j.jmatprotec.2004.05.02010.1016/j.jmatprotec.2004.05.020 ↗
84. 10.1016/j.actamat.2004.09.04210.1016/j.actamat.2004.09.042 ↗
85. 10.1016/j.msea.2012.02.03110.1016/j.msea.2012.02.031 ↗
86. 10.1016/0921-5093(95)09990-510.1016/0921-5093(95)09990-5 ↗
87. 10.1016/S0921-5093(00)00733-410.1016/S0921-5093(00)00733-4 ↗
88. 10.1016/0036-9748(85)90268-610.1016/0036-9748(85)90268-6 ↗
89. 10.1016/j.msea.2004.01.06410.1016/j.msea.2004.01.064 ↗
90. 10.1016/S1359-6462(97)00346-110.1016/S1359-6462(97)00346-1 ↗
91. 10.1179/03063458479041985410.1179/030634584790419854 ↗
92. 10.1179/mst.1988.4.7.62110.1179/mst.1988.4.7.621 ↗
93. 10.1007/BF0281198110.1007/BF02811981 ↗
94. 10.1007/BF0266126910.1007/BF02661269 ↗
95. 10.1016/0001-6160(88)90275-110.1016/0001-6160(88)90275-1 ↗
96. 10.1016/0956-7151(91)90325-U10.1016/0956-7151(91)90325-U ↗
97. McQueen HJ, Spigarelli S, Kassner ME and Evangelista E: ‘Hot deformation and processing of aluminum alloys’; 2011, Florida, USA, CRC Press.
98. 10.1007/BF0267556510.1007/BF02675565 ↗
99. 10.1016/1359-6462(96)00285-010.1016/1359-6462(96)00285-0 ↗
100. McQueen HJ · Aluminium · 2004 · 80 · 1151