Microstructure and bonding mechanisms in cold spray coatings
Source abstract
Abstract
Cold spray additive manufacturing is a solid state deposition process with applications in surface coatings, manufacture of near net shape parts and component repairs. The technology can be used to spray a wide range of metallic powders onto varying substrates to produce the desired properties for application. This is a review of the progress in cold spray technology with particular interest in the bonding behaviour and deformation microstructure. Comparisons between cold spray and other thermal spray technologies such as plasma, wire arc, flame and high velocity oxyfuel spraying are discussed. The key advantage of cold spray over thermal spray is the reduced heat input and absence of melting. This drastically changes the mechanisms in which coatings are formed and bonded to the substrate, thus material properties and particle velocity have a large influence on the mechanical and microstructural properties of the coating. Fundamental understanding of the cold spray process is the key to its rapid uptake into the industry. This review was submitted as part of the 2018 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, University of Leicester, Leicester, UK
TWI, Cambridge, UK
Funding
Engineering and Physical Sciences Research Council · Lloyd's Register Foundation
References (100+)
Show source-provided references
1. Alkhimov A, Papyrin A, Kosarev V, Gas-dynamic spraying method for applying a coating; 1994 [cited 2018 Apr 18]. Available from: http://www.google.com/patents/US5302414
2. Papyrin A · 2006
3. Champagne VK. · 2007
4. 10.1007/978-3-319-16772-510.1007/978-3-319-16772-5 ↗
5. Karthikeyan J. Cold spray technology: international status and USA efforts. Barberton (OH): ASB Industries Inc.; December 2004.
6. 10.1007/s11666-008-9203-310.1007/s11666-008-9203-3 ↗
7. Ghelichi R · Fract Struct Integrity · 2009 · 8 · 3010.3221/IGF-ESIS.08.03 ↗
8. Singh H · Fract Struct Integrity · 2012 · 22 · 6910.3221/IGF-ESIS.22.08 ↗
9. 10.1179/1743294414Y.000000027010.1179/1743294414Y.0000000270 ↗
10. 10.1179/1743294413Y.000000014810.1179/1743294413Y.0000000148 ↗
11. 10.1016/j.actamat.2016.06.03410.1016/j.actamat.2016.06.034 ↗
12. 10.1080/09506608.2016.119494810.1080/09506608.2016.1194948 ↗
13. Botef I, Villafuerte J. Overview. In: Villafuerte J, editor. Modern cold spray: materials, process, and applications. Cham: Springer International Publishing; 2015. p. 1–29.10.1007/978-3-319-16772-5_1 ↗
14. 10.1016/j.surfcoat.2010.03.04310.1016/j.surfcoat.2010.03.043 ↗
15. 10.1016/j.apsusc.2008.07.12710.1016/j.apsusc.2008.07.127 ↗
16. 10.1007/s11666-011-9722-110.1007/s11666-011-9722-1 ↗
17. 10.1007/s11666-010-9568-y10.1007/s11666-010-9568-y ↗
18. 10.1016/S0040-6090(02)00631-410.1016/S0040-6090(02)00631-4 ↗
19. 10.1361/10599639877035084610.1361/105996398770350846 ↗
20. 10.1016/j.surfcoat.2004.04.05810.1016/j.surfcoat.2004.04.058 ↗
21. 10.1007/s11661-005-0182-410.1007/s11661-005-0182-4 ↗
22. 10.1016/j.surfcoat.2011.05.02010.1016/j.surfcoat.2011.05.020 ↗
23. 10.1016/j.surfcoat.2011.10.01010.1016/j.surfcoat.2011.10.010 ↗
24. 10.1007/s11666-012-9790-x10.1007/s11666-012-9790-x ↗
25. 10.1063/1.157374010.1063/1.1573740 ↗
26. 10.1016/j.surfcoat.2005.05.01110.1016/j.surfcoat.2005.05.011 ↗
27. 10.1007/BF0264527110.1007/BF02645271 ↗
28. 10.3390/coatings708012210.3390/coatings7080122 ↗
29. 10.1016/j.surfcoat.2012.04.03410.1016/j.surfcoat.2012.04.034 ↗
30. 10.1016/j.actamat.2012.08.02010.1016/j.actamat.2012.08.020 ↗
31. 10.1007/s11666-008-9254-510.1007/s11666-008-9254-5 ↗
32. 10.1361/105996306X14714410.1361/105996306X147144 ↗
33. 10.1007/s11666-012-9827-110.1007/s11666-012-9827-1 ↗
34. 10.1007/s11666-012-9743-410.1007/s11666-012-9743-4 ↗
35. 10.1007/s11666-010-9564-210.1007/s11666-010-9564-2 ↗
36. 10.1016/S0257-8972(02)00919-210.1016/S0257-8972(02)00919-2 ↗
37. 10.1016/j.scriptamat.2005.06.00810.1016/j.scriptamat.2005.06.008 ↗
38. 10.1023/A:102083301144810.1023/A:1020833011448 ↗
39. 10.1007/s11666-011-9662-910.1007/s11666-011-9662-9 ↗
40. 10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗
41. 10.1016/j.actamat.2005.10.00510.1016/j.actamat.2005.10.005 ↗
42. Sakaki K. The influence of nozzle design in the cold spray process. In: Champagne VK, editor. The cold spray material deposition process: fundamentals and applications. Book section 7. Cambridge: Woodhead Publishing Limited; 2007. p. 117–14510.1533/9781845693787.2.117 ↗
43. 10.1361/105996306X10809310.1361/105996306X108093 ↗
44. 10.1016/j.surfcoat.2007.06.06510.1016/j.surfcoat.2007.06.065 ↗
45. King P, Yandouzi M, Jodoin B. The physics of cold spray. In: Villafuerte J, editor. Modern cold spray: materials, process, and applications. Book section 2. Cham: Springer International Publishing; 2015. p. 31–72.10.1007/978-3-319-16772-5_2 ↗
46. 10.1007/s11666-013-9951-610.1007/s11666-013-9951-6 ↗
47. 10.1016/j.apsusc.2006.07.06110.1016/j.apsusc.2006.07.061 ↗
48. 10.1007/s11666-009-9427-x10.1007/s11666-009-9427-x ↗
49. 10.1016/j.msea.2007.09.01010.1016/j.msea.2007.09.010 ↗
50. 10.1007/BF0246810010.1007/BF02468100 ↗
51. 10.1007/s11666-009-9357-710.1007/s11666-009-9357-7 ↗
52. 10.1016/j.actamat.2008.07.03410.1016/j.actamat.2008.07.034 ↗
53. 10.1361/105996306X10811010.1361/105996306X108110 ↗
54. 10.1016/j.ast.2005.03.00510.1016/j.ast.2005.03.005 ↗
55. Papyrin A, Kosarev V, Klinkov S, High-velocity interaction of particles with the substrate. experiement and modeling. In: Papyrin A, editor. Cold spray technology. Book section 2. Oxford: Elsevier; 2006. p. 33–115.10.1016/B978-008045155-8/50002-8 ↗
56. 10.1361/105996306X12436510.1361/105996306X124365 ↗
57. Hussain T, Yue S, Li CJ. Characteristics of feedstock materials. In: Villafuerte J, editor. Modern cold spray: materials, process, and applications. Book section 3. Cham: Springer International Publishing; 2015. p. 73–105.10.1007/978-3-319-16772-5_3 ↗
58. 10.1016/j.surfcoat.2014.04.03510.1016/j.surfcoat.2014.04.035 ↗
59. 10.1361/105996306X14685710.1361/105996306X146857 ↗
60. 10.1016/j.actamat.2017.02.07010.1016/j.actamat.2017.02.070 ↗
61. 10.1361/105996305X5933210.1361/105996305X59332 ↗
62. 10.1016/S0169-4332(03)00643-310.1016/S0169-4332(03)00643-3 ↗
63. 10.1016/j.matdes.2010.10.01710.1016/j.matdes.2010.10.017 ↗
64. 10.1016/j.matlet.2016.03.03610.1016/j.matlet.2016.03.036 ↗
65. 10.1007/s11666-009-9454-710.1007/s11666-009-9454-7 ↗
66. 10.1088/1755-1315/32/1/01206210.1088/1755-1315/32/1/012062 ↗
67. 10.1016/j.msea.2005.11.01110.1016/j.msea.2005.11.011 ↗
68. 10.1016/j.apsusc.2012.07.03610.1016/j.apsusc.2012.07.036 ↗
69. 10.1007/s11666-009-9327-010.1007/s11666-009-9327-0 ↗
70. 10.1007/s11666-014-0200-410.1007/s11666-014-0200-4 ↗
71. 10.1016/j.scriptamat.2016.07.02410.1016/j.scriptamat.2016.07.024 ↗
72. 10.1016/j.actamat.2008.06.00310.1016/j.actamat.2008.06.003 ↗
73. 10.1361/1059963052266610.1361/10599630522666 ↗
74. 10.1016/j.surfcoat.2006.01.03710.1016/j.surfcoat.2006.01.037 ↗
75. 10.1016/S0257-8972(02)00018-X10.1016/S0257-8972(02)00018-X ↗
76. 10.1016/j.surfcoat.2007.07.02610.1016/j.surfcoat.2007.07.026 ↗
77. 10.1016/j.surfcoat.2004.10.06310.1016/j.surfcoat.2004.10.063 ↗
78. 10.1007/s11666-007-9069-910.1007/s11666-007-9069-9 ↗
79. 10.1016/S0168-9002(01)01067-110.1016/S0168-9002(01)01067-1 ↗
80. 10.1007/s11666-013-9966-z10.1007/s11666-013-9966-z ↗
81. Humphreys F, Hatherly M. The deformed state. In: Recrystallization and related annealing phenomena. 2nd ed.; Chapter 2. Oxford: Elsevier Science and Technology; 2004.10.1016/B978-008044164-1/50006-2 ↗
82. 10.1016/j.matdes.2016.09.01210.1016/j.matdes.2016.09.012 ↗
83. 10.1016/S0921-5093(97)00424-310.1016/S0921-5093(97)00424-3 ↗
84. 10.1016/j.actamat.2013.04.02910.1016/j.actamat.2013.04.029 ↗
85. 10.1016/j.actamat.2012.03.00510.1016/j.actamat.2012.03.005 ↗
86. 10.1016/S0921-5093(03)00335-610.1016/S0921-5093(03)00335-6 ↗
87. 10.1016/j.ijplas.2008.10.00310.1016/j.ijplas.2008.10.003 ↗
88. 10.1007/s11666-016-0382-z10.1007/s11666-016-0382-z ↗
89. 10.1007/s11666-017-0575-010.1007/s11666-017-0575-0 ↗
90. 10.1016/B978-008044164-1/50018-910.1016/B978-008044164-1/50018-9 ↗
91. 10.1007/s11666-017-0603-010.1007/s11666-017-0603-0 ↗
92. 10.1016/j.actamat.2009.02.03210.1016/j.actamat.2009.02.032 ↗
93. 10.1016/j.scriptamat.2008.06.02010.1016/j.scriptamat.2008.06.020 ↗
94. 10.1016/j.actamat.2005.02.04810.1016/j.actamat.2005.02.048 ↗
95. 10.1016/j.scriptamat.2009.07.02010.1016/j.scriptamat.2009.07.020 ↗
96. 10.1007/s11666-011-9634-010.1007/s11666-011-9634-0 ↗
97. 10.1016/j.actamat.2013.06.03310.1016/j.actamat.2013.06.033 ↗
98. 10.1016/j.actamat.2010.10.05810.1016/j.actamat.2010.10.058 ↗
99. Champagne VK, Koh P, Eden TJ, Applications. In: Villafuerte J, editor. Modern cold spray: materials, process, and applications. Book section 10. Cham: Springer International Publishing; 2015. p. 341–376.10.1007/978-3-319-16772-5_10 ↗
100. 10.1007/s11668-008-9116-y10.1007/s11668-008-9116-y ↗