A multicomponent diffusion model for prediction of microstructural evolution in coated Ni based superalloy systems
Source abstract
Abstract
A multicomponent model which can simulate the microstructural evolution of a coated Ni based superalloy system has been developed. The model consists of a one-dimensional finite difference diffusion solver to calculate the component distribution, a power law based model for predicting surface oxidation and a thermodynamic calculation routine for determining the phase evolution. Apart from forecasting concentration and phase profiles after a given thermal history, the model can estimate the losses due to oxidation and the remaining life of a coating based on a concentration and/or phase fraction dependent failure criteria. The phase constitution and concentration profiles predicted by the model have been compared with an experimental NiCoCrAlY coated CMSX-4 system, aged for times up to 10 000 h between 850 and 1050°C, and many experimental features can be predicted successfully by the model. The model is expected to be useful for assessing microstructural evolution of coated turbine blade systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Nesbitt J. A. ‘COSIM—a finite-difference computer model to predict ternary concentration profiles associated with oxidation and interdiffusion of overlay-coated substrates’, Technical report no. NASA/TM-2000-209271, National Aeronautics and Space Administration, Glenn Research Center, 2000.
2. Dahl K. V., and Hald J.: Proc. EPRI Int. Conf. on ‘Advances in condition and remaining life, assessment for fossil power plants’, Charlotte, NC, Electric Power Research Institute (EPRI), Inc., 1-10, 2006.
3. Dahl K. V., Hald J., and Horsewell A.: Defect and Diffusion Forum, 2006, 258-260,73–78.10.4028/www.scientific.net/DDF.258-260.73 ↗
4. ‘DICTRA Users Guide version : 20’, Division of Physical Metallurgy, Department of Materials Science and Engineering, Royal Institute of Technology, Stockholm, Sweden, 1998.
5. 10.1002/andp.1855170010510.1002/andp.18551700105 ↗
6. 10.1111/j.1749-6632.1945.tb36170.x10.1111/j.1749-6632.1945.tb36170.x ↗
7. Smith G. D. ‘Numerical solution of partial differential equations: finite difference methods’, 2nd edn; 1985, Oxford, Oxford University Press.
8. Crank J. · Proc. Cambridge Philosoph. Soc., 1947, XLIII, · 50
9. Press W. H., Teukolsky S. A., Vetterling W. T., and Flannery B. P. ‘Numerical recipes in C: the art of scientific computing’, 2nd edn; 1992, Cambridge, Cambridge University Press.
10. Meier S. M., Nissley D. M., and Sheffler K. D. ‘Thermal barrier coating life prediction model development’, Phase II Final Report, Technical Report NASA Contractor Report 18911/NAS3-23944, National Aeronautics and Space Administration, NASA Lewis Research Center, 1991.
11. Lee E. Y. · TechnoL · 1987 · 32 · 19
12. Nesbitt J. A. · 1983
13. Davies R. H., Dinsdale A. T., and Gisby J. A. ‘MTDATA handbook: application interface programming guide'; 1998, Teddington, National Physical Laboratory.
14. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
15. Saunders N.: Proc. 8th Int. Symp. on ‘Superalloys (Superalloys 1996)’, (ed.Kissinger R. D. et al), 101-110; 1996, Warrendale, PA, The Minerals, Metals & Materials Society, Seven Springs.10.7449/1996/Superalloys_1996_101_110 ↗
16. Murray W. D. · Trans. Am. Soc. Mech. Eng · 1959 · 81 · 106
17. Ikeda T., Almazouzi A., Numakura H., Koiwa M., Sprengel W., and Nakajima H.: Diffus. Defect Data, Part A, Defect Diffus. Forum, 1997, 143-147,275–278.10.4028/www.scientific.net/DDF.143-147.275 ↗
18. 10.1007/BF0265175710.1007/BF02651757 ↗
19. Frank S., Södervall U., and Herzig C.: Diffus. Defect Data Part A, Defect Diffus. Forum, 1997, 143A-147A,245–250.10.4028/www.scientific.net/DDF.143-147.245 ↗
20. Wei H., Sun X., Zheng Q., Guan H., and Hu Z.: Acta Mater. 2004, 52, 2645–2651.10.1016/j.actamat.2004.02.012 ↗
21. 10.1016/S0966-9795(01)00125-X10.1016/S0966-9795(01)00125-X ↗
22. 10.1007/BF0265228810.1007/BF02652288 ↗
23. 10.1116/1.57373110.1116/1.573731 ↗
24. Swalin R. A., and Martin A.: Trans. Am. Inst. Min. Metall Eng. 1956, 567–572.10.1007/BF03377730 ↗
25. Gruzin P. L., Polikarpov I. A., and Fedorov G. B.: Fizika Metallov i Metallovedenie, 1957,4, (1), 94-102 (74-80).
26. Ustad T. · AppL Res · 1973 · 20 · 285
27. Davin A. · Cobalt · 1963 · 19 · 51
28. Karunaratne M. S. A., and Reed R. C.: Acta Mater. 2003, 51, (10), 2905–2919.10.1016/S1359-6454(03)00105-8 ↗
29. Karunaratne M. S. A., and Reed R. C.: Diffus. Defect Data, 2005, 237-240,420–425.10.4028/www.scientific.net/DDF.237-240.420 ↗
30. Karunaratne M. S. A., Carter P., and Reed R. C.: Mater. Set Eng. A, 2000, A281,229–233.10.1016/S0921-5093(99)00705-4 ↗
31. Komai N. · Acta Metall · 1998 · 46 · 4443
32. Sims C. T., Stoloff N. S., and Hagel W. C. (eds.): ‘Superalloys II: high-temperature materials for aerospace and industrial power’; 1987, New York, Wiley-Interscience Publication, John Wiley & Sons.
33. 10.1016/S0924-0136(96)02639-810.1016/S0924-0136(96)02639-8 ↗
34. Meng J., Jia C., and He Q.: Rare Met. 2007, 26, (3), 222–225.10.1016/S1001-0521(07)60205-8 ↗