journal article·2008-03

Effect of heating rate on reaustenitisation of low carbon niobium microalloyed steel

San D. Martín, de T. Cock, A. García-Junceda, F. G. Caballero, C. Capdevila, C. García de Andrés

Materials Science and Technology· Volume 24· Issue 3
Publisher page

Abstract

Austenite formation during a continuous heating in a low carbon niobium microalloyed steel with a pearlite and ferrite initial microstructure has been studied. Characteristic transformation temperatures, Ac1, Acθ and Ac3 and the evolution of austenite formation have been determined by combining dilatometry and metallography in a range of heating rates from 0˙05 to 10 K s–1. It has been observed that nucleation and growth of austenite depends highly on the applied heating rate. At low heating rates (0˙05 K s–1) nucleation of austenite takes place both at pearlite nodules and at ferrite grain boundaries, while for higher heating rates (≥0˙5 K s–1), nucleation at grain boundaries is barely present compared to the nucleation at pearlite nodules. The heating rate also affects the austenite growth path and morphology and, thus, the distribution of martensite in the dual phase microstructure obtained at room temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Jayaswal S. K. · Zeitschrift fur Metallkunde · 1992 · 83 · 809
2. Speich G. R. · Trans. AIME · 1969 · 245 · 1063
3. 10.1007/BF0264855110.1007/BF02648551 ↗
4. 10.1007/BF0264368610.1007/BF02643686 ↗
5. 10.1007/BF0264442110.1007/BF02644421 ↗
6. 10.1007/BF0281422810.1007/BF02814228 ↗
7. 10.1007/BF0264854110.1007/BF02648541 ↗
8. 10.1016/S0921-5093(98)00800-410.1016/S0921-5093(98)00800-4 ↗
9. Albutt K. J. · J. Iron Steel Inst. Jpn · 1966 · 204 · 1217
10. 10.1016/0036-9748(84)90350-810.1016/0036-9748(84)90350-8 ↗
11. Shtansky D. V., Nakai K., and Ohmori Y.: Acta Mater. 1999, 47, 2619–2632.10.1016/S1359-6454(99)00142-1 ↗
12. 10.1016/0001-6160(83)90039-110.1016/0001-6160(83)90039-1 ↗
13. 10.1007/s11661-001-0218-310.1007/s11661-001-0218-3 ↗
14. 10.2355/isijinternational.41.109310.2355/isijinternational.41.1093 ↗
15. 10.1007/BF0264858210.1007/BF02648582 ↗
16. 10.1007/BF0267032810.1007/BF02670328 ↗
17. 10.1179/mst.1986.2.12.119610.1179/mst.1986.2.12.1196 ↗
18. Garcia de Andres C., Caballero F. G., and Capdevila C.: Scr. Mater., 1998, 39, 791–796.10.1016/S1359-6462(98)00146-8 ↗
19. 10.1016/S1359-6462(00)00352-310.1016/S1359-6462(00)00352-3 ↗
20. 10.1179/02670830110151103110.1179/026708301101511031 ↗
21. Caballero F. G. · Rev. Metal. Madrid · 2004 · 40 · 21410.3989/revmetalm.2004.v40.i3.267 ↗
22. Roberts G. · Trans. ASM · 1943 · 31 · 613
23. 10.1016/0001-6160(56)90157-210.1016/0001-6160(56)90157-2 ↗
24. Dirnfeld S. F., Korevaar B. M., and vant Spijker F.: Metall Trans. A, 1974, SA,1437–1444.10.1007/BF02646630 ↗
25. 10.1016/S0921-5093(97)00113-510.1016/S0921-5093(97)00113-5 ↗
26. 10.1007/BF0270043610.1007/BF02700436 ↗
27. 10.1016/S0921-5093(98)00800-410.1016/S0921-5093(98)00800-4 ↗
28. Judd R. R. · Trans. AIME · 1968 · 242 · 206
29. 10.1016/0921-5093(91)90349-R10.1016/0921-5093(91)90349-R ↗
30. 10.2355/isijinternational1966.14.41110.2355/isijinternational1966.14.411 ↗
31. Takahashi M. ‘Reaustenitization from bainite in steels’, PhD thesis, University of Cambridge, Cambridge, UK, 1992.
32. Lenel U. R., and Honeycombe R. W. K.: Proc. Int. Conf. on ‘Phase transformations in ferrous alloys’, (ed.Marder A. R., and Goldstein J. I.), Warrendale, PA, October 1990, TMS—IME,38–46.
33. 10.1016/0921-5093(91)90349-R10.1016/0921-5093(91)90349-R ↗
34. 10.1016/S0921-5093(99)00706-610.1016/S0921-5093(99)00706-6 ↗
35. Shtansky D. V., Nakai K., and Ohmori Y.: Acta Mater. 1999, 47, 2619–2632.10.1016/S1359-6454(99)00142-1 ↗
36. 10.1016/S0921-5093(99)00261-010.1016/S0921-5093(99)00261-0 ↗
37. Vander Voort G. F. ‘Metallography, principles and practice’, 426-427; 1984, New York, McGraw-Hill Book Co.10.31399/asm.tb.mpp.9781627082600 ↗
38. Garcia de Andres C., Caballero F. G., and Capdevila C.: Scr. Mater., 1998, 38, 1835–1842.10.1016/S1359-6462(98)00131-6 ↗
39. 10.1023/A:101657951072310.1023/A:1016579510723 ↗
40. LePera F. S. · J. Met · 1980 · 32 · 38
41. 10.2355/isijinternational.43.72610.2355/isijinternational.43.726 ↗
42. Hodson S. M. ‘MTDATA, metallurgical and thermomechanical databank'; 1989, Teddington, National Physical Laboratory.
43. Zel'dovich V. I., Khomskaya I. V., and Rinkevich O. S.: Phys. Met. Metallogr., 1992, 73,250–265.
44. 10.1016/j.scriptamat.2007.03.03710.1016/j.scriptamat.2007.03.037 ↗
45. 10.1017/S143192760201026710.1017/S1431927602010267 ↗