journal article·2018-01

Laser additive manufacturing of M2 high-speed steel

Min Zhang, Changjun Chen, Lanlan Qin, Kai Yan, Guangping Cheng, Hemin Jing, Tao Zou

Materials Science and Technology· Volume 34· Issue 1
Publisher page

Abstract

M2 high-speed steel samples were fabricated by laser additive manufacturing and tempered at different times at a temperature of 560°C. The microstructures of deposited samples were characterised by fine equiaxial grains, dendrites and inter-dendritic network-shape eutectic carbides and were composed of supersaturated martensite, retained austenite and M 2 C-type carbides. The content of retained austenite gradually decreased with increasing tempering times. Meanwhile, the micro-hardness of deposited samples was 688 ± 10 HV, while the first, second and third tempering times were 833 ± 13 Hv, 710 ± 6 Hv and 740 ± 7 Hv, respectively (standard deviations).Wear resistances of all samples showed an adhesive wear mechanism, and M2 HSS without tempering had a lower friction coefficient with an average of 0.52. M2 HSS after tempering twice at 560°C/2 h had a larger wear volume loss than others.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laser Processing Research Center, School of Mechanical and Electric Engineering, Soochow University, Suzhou, China

School of Material Science and Engineering, Anhui University of Technology, Ma'anshan, China

Kuka Industry Ltd. Co., Suzhou, China

Funding

National Natural Science Foundation of China · State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology · Suzhou University of Science and Technology

References (23)

Show source-provided references
1. Jevremovic D · Metalurgija · 2012 · 51 · 171
2. 10.1016/j.actamat.2013.04.03610.1016/j.actamat.2013.04.036 ↗
3. 10.1016/j.jmbbm.2015.10.01910.1016/j.jmbbm.2015.10.019 ↗
4. 10.1016/j.actamat.2012.04.00610.1016/j.actamat.2012.04.006 ↗
5. 10.1016/j.matdes.2013.03.05610.1016/j.matdes.2013.03.056 ↗
6. 10.1016/j.jallcom.2012.07.02210.1016/j.jallcom.2012.07.022 ↗
7. 10.1016/j.triboint.2005.04.03510.1016/j.triboint.2005.04.035 ↗
8. 10.1016/S0254-0584(03)00058-010.1016/S0254-0584(03)00058-0 ↗
9. 10.1016/S1002-0071(12)60053-710.1016/S1002-0071(12)60053-7 ↗
10. 10.1007/s11661-998-0354-010.1007/s11661-998-0354-0 ↗
11. Yu F · J Iron Steel Res · 2008 · 20 · 1
12. 10.31399/asm.tb.ts5.978162708358410.31399/asm.tb.ts5.9781627083584 ↗
13. Christian JW. The theory of transformations in metals and alloys. London, UK: Elsevier; 2002. p. 251–255.10.1016/B978-008044019-4/50022-2 ↗
14. 10.1080/0010751690820440510.1080/00107516908204405 ↗
15. 10.1016/j.matchar.2013.07.01010.1016/j.matchar.2013.07.010 ↗
16. 10.1016/j.matdes.2014.09.05810.1016/j.matdes.2014.09.058 ↗
17. 10.1007/s11661-000-0206-z10.1007/s11661-000-0206-z ↗
18. 10.1016/S0254-0584(03)00058-010.1016/S0254-0584(03)00058-0 ↗
19. 10.1016/j.surfcoat.2017.02.07110.1016/j.surfcoat.2017.02.071 ↗
20. 10.1016/S0301-679X(96)00040-010.1016/S0301-679X(96)00040-0 ↗
21. 10.1016/j.matlet.2008.11.03510.1016/j.matlet.2008.11.035 ↗
22. 10.1016/j.wear.2017.01.02110.1016/j.wear.2017.01.021 ↗
23. Noyan LC · 1987