Microstructural evolution during hot deformation of duplex stainless steel
Source abstract
Abstract
The microstructure evolution during hot deformation of a 23Cr–5Ni–3Mo duplex stainless steel was investigated in torsion. The presence of a soft δ ferrite phase in the vicinity of austenite caused strain partitioning, with accommodation of more strain in the δ ferrite. Furthermore, owing to the limited number of austenite/austenite grain boundaries, the kinetics of dynamic recrystallisation (DRX) in austenite was very slow. The first DRX grains in the austenite phase formed at a strain beyond the peak and proceeded to <15% of the microstructure at the rupture strain of the sample. On the other hand, the microstructure evolution in δ ferrite started by formation of low angle grain boundaries at low strains and the density of these boundaries increased with increasing strain. There was clear evidence of continuous dynamic recrystallisation in this phase at strains beyond the peak. However, in the δ ferrite phase at high strains, most grains consisted of δ/ δ and δ/ γ boundaries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Humphreys F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena’, 1st edn, 497; 1996, Oxford, Pergamon.10.1016/B978-0-08-041884-1.50008-8 ↗
2. Hornbogen E., and Koster U.: in ‘Recrystallization of metallic materials’, (ed.Haessner F.), 159–194; 1978, Stuttgart, Riederer.
3. 10.1016/S1359-6462(98)00124-910.1016/S1359-6462(98)00124-9 ↗
4. Belyakov A., Miura H., and Sakai T.: Mater. Sci. Eng. A, 1998, A255,139–147.10.1016/S0921-5093(98)00784-9 ↗
5. Dehghan-Manshadi A. · Mater. Forum · 2004 · 467
6. Gottstein G., Brunger E., and Ponge D.: Proc. Conf. on ‘Advanced in hot deformation textures and microstructures’, Pittsburgh, PA, USA, October 1993, TMS,477–492.
7. 10.1016/0924-0136(95)01992-N10.1016/0924-0136(95)01992-N ↗
8. Sellars C. M.: Proc. Conf. on ‘Hot working and forming processes’, London, UK, July 1979, The Metals Society,3–15.
9. 10.1007/BF0160509010.1007/BF01605090 ↗
10. Hodgson P. D., Collinson D. C., and Parker B. A.: Proc. Conf. on ‘Advances in hot deformation textures and microstructures’, USA, 41-61; 1994, Pittsburgh, PA, TMS.
11. 10.2320/matertrans1989.31.98310.2320/matertrans1989.31.983 ↗
12. 10.1179/03063458479042021210.1179/030634584790420212 ↗
13. Akdut N., and Foct J.: ISIJ Int. 1996, 36, 883–892.10.2355/isijinternational.36.883 ↗
14. Cabrera J. M., Mateo A., Llanes L., Prado J. M., and Anglada M.: Mater. Sci. Technol., 2003, 143-144,321–325.10.1016/S0924-0136(03)00434-5 ↗
15. McQueen H. J., Evangelista E., and Ryan N. D.: Proc. Conf. on ‘Thermomechanical processing: mechanisms, microstructure and control’, Sheffield, UK, June 2002, University of Sheffield,359–367.
16. 10.1007/s11661-000-0254-410.1007/s11661-000-0254-4 ↗
17. 10.1023/A:100475042489710.1023/A:1004750424897 ↗
18. Reick W., Pohl M., and Padilha A. F.: IA, Int. 1998, 38, 567–571.10.2355/isijinternational.38.567 ↗
19. 10.1007/s11661-002-0026-410.1007/s11661-002-0026-4 ↗
20. Maki T., Furuhara T., and Tsuzaki K.: ISIJ Int. 2001,41, 571–579.10.2355/isijinternational.41.571 ↗
21. Tsuzaki K., Huang X., and Maki T.: Acta Mater. 1996, 44, 4491–4499.10.1016/1359-6454(96)00080-8 ↗
22. 10.1007/s11661-998-0205-z10.1007/s11661-998-0205-z ↗
23. Cizek P., and Wynne B. P.: Mater. Sci. Eng. A, 1997, A230,88–94.10.1016/S0921-5093(97)00087-7 ↗
24. 10.1088/0022-3735/6/8/01210.1088/0022-3735/6/8/012 ↗
25. Konopleva E. V., Sauerborn M., McQueen H. J., Ryan N. D., and Zaripova R. G.: Mater. Sci. Eng. A, 1997, A234-236,826–829.10.1016/S0921-5093(97)00337-7 ↗
26. 10.1016/0956-7151(94)00409-910.1016/0956-7151(94)00409-9 ↗
27. Oudin A., Barnett M. R., and Hodgson P. D.: Mater. Sci. Eng. A, 2004, A367,282–294.10.1016/j.msea.2003.10.273 ↗
28. Ryan N. D., McQueen H. J., and Evangelista E.: Proc. 7th Int. Symp. on ‘Metallurgy and materials science’, Roskilde, Denmark, September 1986, Riso National Laboratory,527–534.
29. 10.1007/s11661-998-0169-z10.1007/s11661-998-0169-z ↗
30. 10.1007/s11661-000-0048-810.1007/s11661-000-0048-8 ↗
31. 10.2355/tetsutohagane1955.86.5_34910.2355/tetsutohagane1955.86.5_349 ↗
32. Chen T. H., and Yang J. R.: Mater. Sci. Eng. A, 2001, A311,28–41.
33. 10.1016/S1359-6462(01)01088-010.1016/S1359-6462(01)01088-0 ↗
34. 10.1016/0956-7151(95)00028-T10.1016/0956-7151(95)00028-T ↗
35. Sakai T., Belyakov A., and Miura H.: Proc. 1st Joint Int. Conf. on ‘Recrystallization and grain growth’, Aachen, Germany, 2001, Springer-Verlag,669–682.
36. Gourdet S., Chovet C., and Montheillet F.: Proc. 4th Conf. on ‘Recrystallization and related phenomena’, Tsukuba Japan, July 1999, The Japan Institute of Metals,259–264.
37. Davies R. K., Randle V., and Marshall G. J.: Acta Mater. 1998, 46, 6021–6032.10.1016/S1359-6454(98)00286-9 ↗
38. Jazaeri H., and Humphreys F. J.: Mater. Sci. Forum, 2002,396-402,551–556.10.4028/www.scientific.net/MSF.396-402.551 ↗
39. Engler O., and Huh M. Y.: Mater. Sci. Eng. A, 1999, A271,371–381.10.1016/S0921-5093(99)00254-3 ↗
40. Bricknell R. H., and Edington J. W.: Acta Metall. 1979, 27, 1303–1311.10.1016/0001-6160(79)90199-8 ↗
41. Nes E. · J. Mater. Sci. Lett · 1978 · 13 · 2052
42. Hales S. J., and McNelley T. R.: Acta Metall. 1988, 36, 1229–1239.10.1016/0001-6160(88)90275-1 ↗
43. 10.2320/matertrans1989.31.98310.2320/matertrans1989.31.983 ↗
44. 10.1016/0956-7151(91)90325-U10.1016/0956-7151(91)90325-U ↗