journal article·2004-04

Multistep induction heating regimes for thixoforming 7075 aluminium alloy

S. Chayong, H. V. Atkinson, P. Kapranos

Materials Science and Technology· Volume 20· Issue 4
Publisher page

Abstract

Thixoforming involves processing alloys with a spheroidal microstructure in the semisolid state. Commercially it is applied to conventional casting alloys, and one of the scientific challenges is to extend its application to high performance aluminium alloys such as 7075. Aluminium alloy 7075 is readily available in extruded form, and one route to a spheroidal microstructure is to reheat extruded material into the semisolid state to obtain recrystallisation, with the liquid penetrating the recrystallised boundaries. Here this route has been followed, but it has been found that the presence of pinning particles in the microstructure inhibits recrystallisation. To overcome this, a multistep induction heating regime has been developed consisting of a 1 min hold at 475-500 °C, a 1 min hold at 575-600 °C and a shorter 20 s hold for the final step at 620 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering University of Ubonratchathani, Warinchamrap, Ubonratchathani 34190, Thailand

Department of Engineering University of Leicester, University Rd, Leicester, LE1 7RH, UK

Department of Engineering Materials University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield S1 3JD, UK

References (18)

Show source-provided references
1. 10.1007/BF0266109010.1007/BF02661090 ↗
2. 10.1007/BF0264258010.1007/BF02642580 ↗
3. 10.1016/S0261-3069(99)00077-110.1016/S0261-3069(99)00077-1 ↗
4. 10.1179/imr.1994.39.5.17310.1179/imr.1994.39.5.173 ↗
5. KIRKWOOD D. H. SELLARS C. M. and BOYED L. G. ELIAS: European Patent 0 305 375 B1 ‘Thixotropic materials’ 28/10/92 US Patent 5 133 811 28/7/92.
6. ATKINSON L. C. V. and LIU D.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’ (ed. Tsutui Y. et al) 51-56; Tokyo National Institute of Advanced Industrial Science and Technology.
7. ‘Metals handbook’ Desk edn ; 1984 Metals Park OH American Society for Metals.
8. 10.1179/mtlr.1971.16.1.9510.1179/mtlr.1971.16.1.95 ↗
9. POLMEAR I. J.: ‘Light alloys’ 3rd edn; 1995 London Edward Arnold.
10. STALEY J. T.: Proc. 3rd Int. Conf. on ‘Aluminium alloys’ Vol. 3 ‘Their physical and mechanical properties’ (ed. L. Amberg et al.) 107-143; 1992 Trondheim The Norwegian Institute of Technology.
11. RAGHAVAN A., , KOO J. Y., , STEEDS J. W., and PARK B. K.: Metall. Trans A, 1985, 16A, 1925–1936.10.1007/BF02662393 ↗
12. 10.1007/BF0267228310.1007/BF02672283 ↗
13. BACKERUD L. KROL E. and TAMMINEN J.: ‘Solidification characteristics of aluminium alloys’ Vol. 1; 1986 Oslo Tangen Trykk A/S.
14. 10.1007/s11661-999-0134-510.1007/s11661-999-0134-5 ↗
15. BURKE K. J.: ‘Semi-solid processing of aluminium 7075’, PhD thesis, University of Sheffield, UK, 1998.
16. 10.1016/0956-7151(94)00448-Q10.1016/0956-7151(94)00448-Q ↗
17. KIUCHI M. YANAGIMOTO J. and SUGIYAMA S.: Proc. 5th Int. Conf. on ‘Semi-solid processing of alloys and composites’ (ed. Bhasin A. K. et al.) 589-596; 1998 Colorado School of Mines.
18. WITULSKI T. MORJAN U. NIEDICK I. and HIRT G.: Proc. 5th Int. Conf. on ‘Semi-solid processing of alloys and composites’ (ed. Bhasin A. K. et al.) 353-360; 1998 Golden CO Colorado School of Mines.