journal article·2014-06

New generation ultrahigh strength boron steel for automotive hot stamping technologies

T. Taylor, G. Fourlaris, P. Evans, G. Bright

Materials Science and Technology· Volume 30· Issue 7
Publisher page

Abstract

The automotive industry is under increasing pressure to: (1) reduce the weight of vehicles and (2) improve crash performance. ‘Hot stamped’ mild carbon–manganese–boron steel 22MnB5 has become common place in the body structure of the European vehicle over the past decade. The ultrahigh strength martensitic microstructure resulting from hot stamping (proof strength ∼1200 MPa and ultimate tensile strength ∼1500 MPa) enables down gauging while not compromising crash performance. However, with demands for yet higher strength in the final component so to enable further down gauging, novel grades must be developed. In this paper, development of the novel grade 38MnB5 was reported. Following hot stamping, 38MnB5 demonstrated proof strength in excess of 1400 MPa and ultimate tensile strength in excess of 2000 MPa. Owing to the immense strength, the novel grade 38MnB5 was considered to offer significant down gauging and weight reduction opportunities to the automotive industry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Engineering, Swansea University, Singleton Park, Swansea SA2 8PP, UK

Tata Steel Strip Products UK RD&T, Heol Cefn Gwrgan, Port Talbot SA13 2EZ, UK

References (39)

Show source-provided references
1. 10.1016/j.jmatprotec.2010.07.01910.1016/j.jmatprotec.2010.07.019 ↗
2. Tamarelli C. M. ‘AHSS 101: the evolving use of advanced high strength steels for automotive applications’, Steel Market Development Institute (AUTOSTEEL), Washington, DC, USA, 2011.
3. ‘Advanced high strength steels (AHSS) application guidelines version 4.1’, International Iron and Steel Institute, Brussels, Belgium, 2009.
4. 10.1016/j.msea.2012.01.06010.1016/j.msea.2012.01.060 ↗
5. 10.1016/j.matdes.2012.08.06210.1016/j.matdes.2012.08.062 ↗
6. 10.1016/j.msea.2007.10.05710.1016/j.msea.2007.10.057 ↗
7. Naderi M., Thorsten L., Vitoon U., and Wolfgang B.: Unpublished work, 2010.
8. 10.1002/srin.20090012510.1002/srin.200900125 ↗
9. Naderi M. · J. Mater. Process. Technol. · 2007 · 27 · 369
10. 10.1016/j.proeng.2011.04.07810.1016/j.proeng.2011.04.078 ↗
11. 10.1016/j.msea.2012.01.01810.1016/j.msea.2012.01.018 ↗
12. Tungtrongpairoj J. · J. Met. Mater. Miner. · 2009 · 19 · 29
13. 10.1051/metal:200316010.1051/metal:2003160 ↗
14. Schieβl G., Possehn T., Heller T., and Sikora S.: Proc. IDDRG Int. Deep Drawing Research Group 2004 Conf., Sindelfingen, Germany, May 2004, IDDRG, 158–166.
15. Bergland G. ‘The history of hardening of boron steel in northern Sweden’, Proc. 1st Int. Conf. on ‘Hot sheet metal forming of high-performance steel’, Kassel, Germany, October 2008, GRIPS Media GmbH, 175–177.
16. ArcelorMittal: ‘Usibor 1500P and hot stamping’, Proc. AP&T Press Hardening Sem., Paris, France, June 2009, AP&T & ESI Group.
17. 10.1007/BF0264688810.1007/BF02646888 ↗
18. Mortimer D. A. · Mater. Sci. · 1976 · 10 · 326
19. 10.1007/BF0266728310.1007/BF02667283 ↗
20. Doane D., and Kirkaldy J. ‘Hardenability concepts with application to steel’; 1978, Warrendale, PA, The Metallurgical Society of AIME.
21. Banerji S., and Morral J. ‘Boron in steels’; 1979, Warrendale, PA, The Metallurgical Society of AIME.
22. Clough A. ‘Boron steel developments at EuroCarBody 2012’, Proc. Conf. EuroCarBody, Automotive Circle International, Tatasteel. Bad Nauheim, Germany, October 2012.
23. Thyssenkrupp Steel Europe AG: ‘Gamma protect’, 2012, http://www.thyssenkrupp-steel-europe.com/upload/binarydata_tksteel05d4cms/18/11/79/02/00/00/2791118/GammaProtect_en.pdf (accessed 15 March 2013).
24. Yurioka N. ‘Carbon equivalents for hardenability and cold cracking susceptibility of steels’, Proc. Select Conf. on Hardenability of Steels, Derby, UK, May 1990, Welding Institute, Paper 3.
25. Bain E. C. ‘The alloying elements in steel’; 1939, Materials Park, OH, ASM International.
26. Hensen G. ‘Handbook for tailor made nechanical properties through hot forming, hot forming product and process parameters’, Corus, Ijmuiden, The Netherlands, 2009.
27. ‘Metallic materials. Tensile testing. Method of test at ambient temperature’, BS EN ISO 6892-1:2009, BSI, London, UK, 2009.
28. ‘Standard recommended practice for determining volume fraction by systematic manual point count’, Part II, Annual Book of ASTM Standards E562, 4th edn, ASTM, West Conshohocken, PA, USA, 1999.
29. ‘Standard methods for estimating the average grain size of metals’, Part 11, Annual Book of ASTM Standards E112, ASTM, West Conshohocken, PA, USA, 1980.
30. Priestner R. · J. Mater. Process. Technol. · 2011 · 113 · 587
31. 10.1007/BF0264639610.1007/BF02646396 ↗
32. ‘Standard practice for X-ray determination of retained austenite in steel with near random crystallographic orientation’, ASTM Designation E975-95, ASTM, West Conshohocken, PA, USA, 2003.
33. ‘Metallic materials – Vickers hardness test’, Part 1, BS EN ISO 6507-1:2005, BSI, London.
34. 10.31399/asm.sch6.978162708354610.31399/asm.sch6.9781627083546 ↗
35. Agrawal B. K. ‘Introduction to engineering materials’; 1988, New Delhi, Tata McGraw-Hill Education.
36. Abbaschian R., Abbaschian L., and Reed Hill R. E. ‘Physical metallurgy principles’, 4th edn; 2009, Stamford, CT, Cengage Learning.
37. Tokizawa A., Yamamoto K., Takemoto Y., and Senuma T. ‘Development of 2000MPa class hot stamped steel components with good toughness and high resistance against delayed fracture’, Proc. 4th Int. Conf. on Hot Sheet Metal Forming of High Performance Steel 2013, CHS2-Chair of Metal forming Technology, Graduate School of Natural Science and Technology, Okayama University. Luleå, Sweden, June 2013.
38. 10.1007/978-3-540-30300-810.1007/978-3-540-30300-8 ↗
39. Callister W. D. ‘Materials science and engineering an introduction’; 2003, New York, John Wiley & Sons.