Thermomechanical relaxation of residual stress in shot peened nickel base superalloy
Source abstract
Abstract
The thermal and thermomechanical behaviour of the relaxation of the residual stresses of a shot peened Astroloy superalloy under tensile cyclic loads has been evaluated by X-ray diffraction and investigated. The stress relaxation under purely thermal conditions (550 and 650°C) and thermomechanical conditions (pulsating tensile loading at 650°C) as afunction of the exposure time is presented. The purely thermal relaxation is interpreted by annihilation and reorganisation of the crystalline defects induced by shot peening, whereas the mechanical relaxation is linked to cyclic plasticity of materials. In consequence, the thermomechanical relaxation is essentially due to the complex mechanism of the concurrent thermal and mechanical effects. A model is used to predict the residual stresses induced by the specified shot peening conditions and their relaxation under the specified thermal/thermomechanical conditions.MST/1963
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. H. WOHLFAHRT: in 'Shot peening: science, technology, appli-cation', 563–584; 1987, Oberursel, Germany, DGM Informationsgesellschaft Verlag.
2. G. GRAY, L. WAGNER, and G. LOTJERING: in 'Shot peening: science, technology, application', 447–457; 1987, Oberursel, Germany, DGM Informationsgesellschaft Verlag.
3. MASMOUDI N. · November—December · 1989 · 29
4. J. HOFFMANN, B. SCHOLTES, O. Vol-I:RINGER, and E. MACHERAUCH: In 'Shot peening: science, technology, application', 239–246; 1987, Oberursel, Germany, DGM Informationsgesellschaft Verlag.
5. CAO W. · Méc. Mater. Electr. · 1992 · 445 · 21
6. A. BIGNONNET: in 'Shot peening ICSP3', (ed. H. Wohlfahrt et al.), 659–666; 1987, Oberursel, Germany, DGM Informationsgesellschaft Verlag.
7. J. P. BONNAFE and G. MAEDER: in 'Shot peening ICSP3', (ed. H. Wohlfahrt et al.), 485–497; 1987, Oberursel, Germany, DGM Informationsgesellschaft Verlag.
8. CAO W. · Mater. Tech. · 1993 · 4
9. BEADMORE P. · TMS—AIME · 1969 · 245 · 1537
10. B. D. CULLITY: 'Elements of X-ray diffraction', 2 edn, 1978, Reading, MA, Addison-Wesley.
11. S. TAIRA (ed.): ‘X-ray studies on mechanical behavior of materials', ch. 7, 204–241; 1974, Tokyo, Japan, Society of Materials Science.
12. D. HAKIMI, C. SERVANT, and L. CASTEX: in Proc. Conf. 'Shot peening ICSP2', (ed. H. O. Fuchs), Chicago, IL, 1984, The American Shot Peening Society, pp. 249–258.
13. KHABOU M. T. · Eur. J. Mech., Part A Solids · 1989 · 6 · 537
14. J. K. LI, R. ZHANG, M. YAO, and R. WANG: in Proc. Conf. ‘ICRS3', (ed. H. Fujiwara et al.), Vol. 1, 750–757; 1991, New York, Elsevier Applied Science.
15. 10.1016/0029-5493(89)90088-510.1016/0029-5493(89)90088-5 ↗
16. W. CAO and L. CASTEX: in Proc. Conf. ICRS2', (ed. G. Beck et al.), 631–636; 1988, New York, Elsevier Applied Science.
17. CAO W. · Méc. Mater. Electr. · 1993 · 447 · 37