journal article·2011-02

Differential scanning calorimetry study of diffusional and martensitic phase transformations in some 9 wt-%Cr low carbon ferritic steels

B. Jeya Ganesh, S. Raju, Arun Kumar Rai, E. Mohandas, M. Vijayalakshmi, K. B. S. Rao, Baldev Raj

Materials Science and Technology· Volume 27· Issue 2
Publisher page

Abstract

The results of a comprehensive characterisation study of different phase transformations that take place upon heating and cooling in some low carbon, 9 wt-%Cr steels with varying concentrations of microalloying additions are presented in this paper. The steels investigated include: standard 9Cr–1Mo grade, V and Nb added modified 9Cr variety, controlled silicon added versions of plain 9Cr variety, (Ni+Mn) content controlled modified 9Cr welding consumables and one composition of W, Ta added reduced activation steel. The various on-heating diffusional phase changes up to the melting range and subsequent rapid cooling induced martensitic transformations are investigated in a controlled manner using differential scanning calorimetry under different heating and cooling rates, in the range 1–100 K min−1. In addition to the accurate determination of A c1, A c3, M23C6, MX carbide dissolution and δ-ferrite formation temperatures upon heating, the melting range and the associated fusion enthalpy have also been established for these steels. The effect of prolonged thermal aging at temperatures of 823–873 K on austenite formation characteristics has also been investigated for standard and modified 9Cr–1Mo steels. The critical cooling rate for the formation of martensite on cooling from single phase austenite region is estimated to be about 4–5 K min−1 for all 9Cr steels investigated in this study. The effect of holding at 1273 K in the austenite region on martensite start temperature Ms, has also been evaluated as a part of this study. The experimental results are discussed in the light of the prevailing understanding of the physical metallurgy of high chromium low carbon steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Metallurgy and Materials Group Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603 102, Tamil Nadu, India

References (57)

Show source-provided references
1. 10.2355/isijinternational.41.61210.2355/isijinternational.41.612 ↗
2. Sikka V. K., Ward C. T., and Thomas K. C.: Proc. on ‘Ferritic steels for high-temperature applications’, (ed. Khare A. K.), 65–84; 1983 Metals Park, OH, ASM.
3. Abe F., Igarashi M., Fujitsuna N., Kimura K., and Muneki S.: Proc. Conf. on ‘Advanced heat resistant steel for power generation’, Sebastian San, Spain, April 1988, Cambridge University Press, 84 –97.
4. 10.2355/isijinternational.32.17510.2355/isijinternational.32.175 ↗
5. Bell W. L., Lauritzen T., and Vaidyanathan S.: Proc. Top. Conf. on ‘Ferritic alloys for use in nuclear energy technologies – ferritics for breeder reactor in-core applications’, (ed. Davis J. W., and Michel D. J.), 113–124; 1983, Warrendale, PA, The Metallurgical Society/AIME.
6. 10.1179/174328005X4114010.1179/174328005X41140 ↗
7. Ennis P. J., and Quadakkers W. J.: Proc. 7th Conf. on ‘Materials for advanced power engineering’, Liege, Belgium, September 2002, 1131–1142; Kluwer Academic Publishers, Belgium.
8. Williams R. K. · 1981 · 219
9. 10.2355/isijinternational.41.64110.2355/isijinternational.41.641 ↗
10. 10.2355/isijinternational.39.87410.2355/isijinternational.39.874 ↗
11. Ellis F. V., Henry J. F., and Roberts B. W.: Proc. Conf. on ‘New alloys for pressure vessels and piping’, Vol. 201, 55–63; 1990, New York, ASME.
12. 10.1016/S0921-5093(00)00831-510.1016/S0921-5093(00)00831-5 ↗
13. Klueh R. L. · J. Nucl. Mater. · 1992 · 191
14. 10.1016/j.cossms.2004.09.00410.1016/j.cossms.2004.09.004 ↗
15. Ioltukhovsky A. G. · J. Nucl. Mater. · 1996 · 233
16. 10.1016/j.msea.2007.04.09310.1016/j.msea.2007.04.093 ↗
17. Blum R., and Vanstone R. W.: Proc. 6 th Int. Conf. on ‘Charles Parsons turbine conference’, Dublin, Ireland, September 2003, 489–510; Maney Publishing, London, UK.
18. 10.1088/1468-6996/9/1/01300210.1088/1468-6996/9/1/013002 ↗
19. Pickering F. B. ‘Physical metallurgy and the design of steels’; 1978, London, Applied Science Publishers.
20. Sanderson S. J.: Proc. Int. Conf. on ‘Ferritic steels for fast reactor steam generators’, (ed. Pugh S. F., and Little E. A.), 120–123; 1978, London, BNES.
21. 10.2355/isijinternational.41.Suppl_S8110.2355/isijinternational.41.Suppl_S81 ↗
22. 10.1016/S0040-6031(99)00424-410.1016/S0040-6031(99)00424-4 ↗
23. 10.1007/978-1-4615-3286-6_1810.1007/978-1-4615-3286-6_18 ↗
24. 10.1007/s10765-009-0558-610.1007/s10765-009-0558-6 ↗
25. 10.1016/j.msea.2007.01.12710.1016/j.msea.2007.01.127 ↗
26. 10.2355/isijinternational.43.180710.2355/isijinternational.43.1807 ↗
27. 10.1016/0025-5416(88)90257-110.1016/0025-5416(88)90257-1 ↗
28. 10.2355/isijinternational.41.109310.2355/isijinternational.41.1093 ↗
29. 10.1016/S0364-5916(01)00046-310.1016/S0364-5916(01)00046-3 ↗
30. 10.1016/0036-9748(83)90334-410.1016/0036-9748(83)90334-4 ↗
31. 10.1179/03063458479042015910.1179/030634584790420159 ↗
32. Shtansky D. V. · Z. Metallkd., · 1999 · 90 · 25
33. 10.2355/isijinternational.45.191510.2355/isijinternational.45.1915 ↗
34. 10.1016/j.jnucmat.2008.05.01010.1016/j.jnucmat.2008.05.010 ↗
35. 10.1361/105497106X9287110.1361/105497106X92871 ↗
36. 10.2355/isijinternational.45.10710.2355/isijinternational.45.107 ↗
37. Raju S.: unpublished research.
38. 10.1016/j.commatsci.2005.01.00210.1016/j.commatsci.2005.01.002 ↗
39. 10.1007/BF0111390710.1007/BF01113907 ↗
40. 10.1016/S0040-6031(01)00584-610.1016/S0040-6031(01)00584-6 ↗
41. 10.1016/S0040-6031(03)00144-810.1016/S0040-6031(03)00144-8 ↗
42. Igarashi M., Muneki S., and Abe F.: Proc. 6th Conf. on ‘Mateials for advanced power engineering’, Liege, Belgium, 1998, 637–646; Kluwer Academic Publishers, Belgium.
43. 10.1002/srin.19960549810.1002/srin.199605498 ↗
44. Naoi H., and Fujita T.: Proc. on ‘New steels for advanced plant up to 620°C’, (ed. Metcalfe E.); 1995, Oxon, PICA Publ. Services.
45. Berger C.: Proc. on ‘High temperature materials for power engineering’, (ed. Coutsouradis D., et al.), 47–72; 1994, Dordrecht, Kluwer Academic Publishers.
46. Danon A. · J. Nucl. Mater. · 2001 · 479
47. 10.1179/mst.1996.12.6.45310.1179/mst.1996.12.6.453 ↗
48. Fin Y. Y. · Mater. Sci. Eng. A · 2003 · 344 · 9210.1016/S0921-5093(02)00418-5 ↗
49. 10.1016/0956-716X(95)00023-O10.1016/0956-716X(95)00023-O ↗
50. 10.2355/isijinternational.45.10110.2355/isijinternational.45.101 ↗
51. 10.1007/BF0267044310.1007/BF02670443 ↗
52. 10.2355/isijinternational.46.169310.2355/isijinternational.46.1693 ↗
53. 10.1016/S0364-5916(97)00007-210.1016/S0364-5916(97)00007-2 ↗
54. Bjarbo A. · Metall. Trans. A · 2001 · 32 · 2010.1007/s11661-001-0247-y ↗
55. 10.2355/isijinternational.35.114810.2355/isijinternational.35.1148 ↗
56. 10.2355/isijinternational.42.89410.2355/isijinternational.42.894 ↗
57. Raju S., Jeyaganesh B., Rai A. K., and Mohandas E.: Unpublished Research, 2009.