journal article·2009-09Open access

Fracture strength and toughness of ultra high strength TRIP aided steels

K.-I. Sugimoto

Materials Science and Technology· Volume 25· Issue 9

Abstract

The performance of hydrogen embrittlement, fatigue properties and impact toughness of ultra high strength transformation induced plasticity aided steels with bainitic ferrite matrix (TBF steels) has been discussed. Some characteristics and deformation transformation mechanism of the retained austenite has also been discussed. It has been observed that mechanical stability and volume fraction of the interlath retained austenite phase in the TBF steels play an important role in increasing delayed fracture strength, fatigue limit and impact toughness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Systems EngineeringShinshu University, 4-17-1, Wakasato, Nagano 380 8553, Japan

References (65)

Show source-provided references
1. Zackay F. · Trans. Am. Soc. Met · 1967 · 60 · 252
2. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
3. 10.1007/BF0265392310.1007/BF02653923 ↗
4. Sugimoto K., Misu M., Kobayashi M., and Shirasawa H.: ISIJ Int. 1993, 33, 775–782.10.2355/isijinternational.33.775 ↗
5. 10.1007/BF0265681610.1007/BF02656816 ↗
6. Sugimoto K., Usui N., Kobayashi M., and Hashimoto S.: ISIJ Int. 1992, 32, 1311–1318.10.2355/isijinternational.32.1311 ↗
7. 10.1007/BF0264612710.1007/BF02646127 ↗
8. Hiwatashi S. · J. Jpn Soc. Technot Plast · 1994 · 35 · 1109
9. Hanzaki Z., Hodgson P. D., and Yue S.: ISIJ Int. 1995, 35, 79–85.10.2355/isijinternational.35.79 ↗
10. Girault Jacqes, E., Harlet P., and Delannay F.: ISIJ Int. 2001, 41, 1061–1067.10.2355/isijinternational.41.1061 ↗
11. De B. C. Cooman (ed.): Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’; 2002, Gent, GRIPS’ Sparkling World of Steel.
12. Sugimoto K., Nagasaka A., and Kobayashi M.: Proc. Int. Symp. on ‘Hot workability of steels and light alloys-composites’, 503-514; 1996, Montreal, CIM.
13. Sugimoto K. · Trans. Ind Inst. Met · 2006 · 59 · 725
14. Sugimoto K., Sakaguchi J., Iida T., and Kashima T.: ISIJ Int. 2000, 40, 920–926.10.2355/isijinternational.40.920 ↗
15. Sugimoto K., Kanda A., Kikuchi R., Hashimoto S., Kashima T., and Ikeda S.: ISIJ Int. 2002, 42, 910–915.10.2355/isijinternational.42.910 ↗
16. Sugimoto K., Yu B., Mukai Y., and Ikeda S.: ISIJ Int. 2005, 45, 1194–1200.10.2355/isijinternational.45.1194 ↗
17. Sugimoto K., Nakano K., Song S., and Kashima T.: ISIJ Int. 2002, 42, 450–455.10.2355/isijinternational.42.450 ↗
18. Sugimoto K., Murata M., Muramatsu T., and Mukai Y.: ISIJ Int. 2007, 47, 1357–1362.10.2355/isijinternational.47.1357 ↗
19. Hulka K., Bleck W., and Papamantellos K.: Proc. 41st MWSP Conf.Vol. 37, 67-77; 1999, Warrendale, PA, ISS.
20. Hashimoto S., Ikeda S., Sugimoto K., and Miyake S.: ISIJ Int. 2004, 44, 1590–1598.10.2355/isijinternational.44.1590 ↗
21. Imai N. · CAMP-ISIJ · 1995 · 8 · 572
22. Barbe L., Martinez L. T., DeCooman B. C.: Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, (ed. by B. C. DeCooman), 147-151; 2002, Gent, GRIPS’ Sparkling World of Steel,
23. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
24. Traint S., Pichler A., Blaimschein M., Röthler B., Krempaszky C., and Werner E.: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, 79-98; 2004, Warrendale, PA, AIST.
25. 10.1016/S1359-6462(00)00697-710.1016/S1359-6462(00)00697-7 ↗
26. Ohlert J., Bleck W., and Hulka K.: Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, 199-206; 2002, Gent, GRIPS’ Sparkling World of Steel.
27. Jiao S., Hassani F., Donaberger R. L., Essadiqi E., and Yue S.: ISIJ Int. 2002, 42, 299–303.10.2355/isijinternational.42.299 ↗
28. Timokhina I. B., Pereloma E. V., and Hodgson P. D.: Proc. Int. Symp. on ‘Transformation and deformation mechanism in advanced high-strength steels’, 331-344; 2003, Vancouver, BC, CIM.
29. Srivastava A. K., Bhattachrjee D., Jha G., Gope N., and Singh S. B.: Mater. Sci. Eng. A, 2007, A445-446,549–557.10.1016/j.msea.2006.09.101 ↗
30. De A. K., Kircher R. S., Speer J. G., and Matlock D. K.: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, 337-348; 2004, Warrendale, PA, AIST.
31. Streicher A. M., Speer J. G., Matlock D. K., and DeCooman B. C.: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, 51-62; 2004, Warrendale, PA, AIST.
32. 10.2320/matertrans1989.32.68910.2320/matertrans1989.32.689 ↗
33. Maruyama H. · J. Jpn Soc. Heat Treat · 1977 · 17 · 198
34. Dyson D. J. · J. Iron Steel Inst · 1970 · 208 · 469
35. Azuma M., Fujita N., Takahashi M., lung T., Bouaziz O., Goune M., Perlade A., and Quidort D.: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, 269-276; 2004, Warrendale, PA, AIST.
36. Sugimoto K., Kobayashi M., Nagasaka A., and Hashimoto S.: ISIJ Int. 1995, 35, 1407–1414.10.2355/isijinternational.35.1407 ↗
37. 10.2355/isijinternational1966.10.16310.2355/isijinternational1966.10.163 ↗
38. 10.1179/02670830422501118010.1179/026708304225011180 ↗
39. Itami A. · Proc. Symp. on ‘High-strength sheet steels for the automotive industry’, (ed.
40. Plichta M. R., and Aaronson H. I.: Metall Trans. 1974, 5, 2611–2613.10.1007/BF02643888 ↗
41. 10.1007/s11661-997-0020-y10.1007/s11661-997-0020-y ↗
42. 10.1179/03063457879043375610.1179/030634578790433756 ↗
43. 10.1080/1478643660822428210.1080/14786436608224282 ↗
44. Mura T., and Mori T. ‘Micromechanics'; 23, 1976, Tokyo, Baifukan.
45. Samek L., DeMoor L, E., and DeCooman B. C.: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, 361; 2004, Warrendale, PA, AIST.
46. Mukherjee M., Mohanty O. N., Hashimoto S., Hojo T., and Sugimoto K.: ISIJ Int. 2006, 46, 316–324.10.2355/isijinternational.46.316 ↗
47. Brux U., Frommeyer G., Grassel O., Meyer L. W., and Weise A.: Steel Res. 2002, 73, 294–299.10.1002/srin.200200211 ↗
48. 10.1299/kikaia.61.8010.1299/kikaia.61.80 ↗
49. 10.2355/tetsutohagane1955.90.3_17710.2355/tetsutohagane1955.90.3_177 ↗
50. Hojo T., Sugimoto K., Mukai Y., and Ikeda S.: Proc. 2nd Int. Conf. on ‘Advanced structural steels’, 638-641; 2004, Shanghai, CSM.
51. 10.2355/tetsutohagane1955.92.2_8310.2355/tetsutohagane1955.92.2_83 ↗
52. 10.2355/tetsutohagane.93.23410.2355/tetsutohagane.93.234 ↗
53. Tsubakino H., and Harada H. ‘Advances in delayed fracture solution’, 138-143; 1977, Tokyo, ISIJ.
54. Gu J. L., Chang K. D., Fang H. S., and Bai B. Z.: ISIJInt. 2002, 42, 1560–1564.10.2355/isijinternational.42.1560 ↗
55. 10.2472/jsms.50.65710.2472/jsms.50.657 ↗
56. Song S. · Mater. Sci. Res. Int · 2003 · 9 · 223
57. Yokoi T., Takahashi M., and Ikenaga N.: SAE technical Paper 2001-01-0042, 2002.
58. 10.1016/j.engfracmech.2007.01.01910.1016/j.engfracmech.2007.01.019 ↗
59. 10.4028/www.scientific.net/KEM.345-346.24710.4028/www.scientific.net/KEM.345-346.247 ↗
60. Dieter G. E. ‘Mechanical metallurgy’, ST Metric edn, 403; 1988, Singapore, McGraw-Hill Book Company.
61. Takahashi M. · Nippon Steel Technical Report · 2003 · 88 · 2
62. 10.2355/tetsutohagane1955.86.8_56310.2355/tetsutohagane1955.86.8_563 ↗
63. Knott J. F. ‘Fundamentals of fracture mechanics’, 138; 1977, Tokyo, Bifukan.
64. 10.1179/03063458379042060010.1179/030634583790420600 ↗
65. 10.4028/www.scientific.net/MSF.539-543.430910.4028/www.scientific.net/MSF.539-543.4309 ↗