journal article·2010-06

Microstructure and failure behaviour of resistance spot welded DP980 dual phase steel

F. Nikoosohbat, S. Kheirandish, M. Goodarzi, M. Pouranvari, S. P. H. Marashi

Materials Science and Technology· Volume 26· Issue 6
Publisher page

Abstract

In this research, microstructure and overload failure behaviour of resistance spot welded DP980 were investigated. Microstructural characterisation, microhardness test and static tensile shear test were conducted. Fusion zone size proved to be the most important controlling factor of spot weld peak load and energy absorption. The results of this study demonstrated that the conventional weld size recommendation of d=4 t1/2 is not sufficient to ensure the pullout failure mode for DP980 steel resistance spot welds during the tensile shear test. In pullout mode, generally, failure was initiated at heat affected zone/base metal interface, where softening occurs due to the tempering of martensite. However, when heavy expulsion occurs, pullout failure tends to be initiated at fusion zone/heat affected zone interface. It was shown that heavy expulsion and associated large electrode indentation can reduce load carrying capacity and energy absorption capability of DP980 spot welds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science and Metallurgical Engineering Department, Iran University of Science and Technology (IUST), Tehran, Iran

Materials Science and Metallurgical Engineering Department, Iran University of Science and Technology (IUST), Tehran, Iran;, Email: mgoodarzi@iust.ac.ir

Materials and Metallurgical DepartmentSchool of Engineering, Islamic Azad University, Dezful Branch, Dezful, Iran

Mining and Metallurgical Engineering DepartmentAmirkabir University of Technology, Tehran, Iran

References (31)

Show source-provided references
1. 10.1007/s11661-001-0067-010.1007/s11661-001-0067-0 ↗
2. Tumuluru M. D.: Weld 1, 2007, 86,31–37.10.2469/dig.v37.n1.4511 ↗
3. Marashi P., Pouranvari M., Amirabdollahian S., Abedi A., and Goodarzi M.: Mater. Sci. Eng. A, 2008, A480,175–180.10.1016/j.msea.2007.07.007 ↗
4. Marya M., and Gayden X. Q.: Weld 1, 2005, 84, 172s-182s.
5. 10.1016/j.engfailanal.2007.01.01810.1016/j.engfailanal.2007.01.018 ↗
6. 10.1179/174328408X26241810.1179/174328408X262418 ↗
7. Marya M., and Gayden X. Q.: Weld J., 2005,84, 197s-204s.
8. 10.1179/174329307X15980110.1179/174329307X159801 ↗
9. 10.1179/174329306X12089510.1179/174329306X120895 ↗
10. Ma C., Chen D. L., Bhole S. D., Boudreau G., Lee A., and Biro E.: Mater. Sci. Eng. A, 2008, A485, 334-34610.1016/j.msea.2007.08.010 ↗
11. Pakalnins E., and Morrisette T.: Proc. 11th Int. Conf. on ‘Sheet metal welding’, Livonia, MI, USA, May 2004, American Welding Society.
12. ‘Recommended practices for test methods for evaluating the resistance spot welding behavior of automotive sheet steels’, ANSI/AWS/SAE D 8.9-97, American Welding Society, Miami, FL, USA, 1997.
13. Li M. V., Dong D., and Kimchi M. ‘Modeling and analysis of microstructure development in resistance spot welds of high strength steels’, SAE technical paper no. 982278, SAE International, Warrendale, PA, USA, 1998.10.4271/982278 ↗
14. Volger M. · 1993
15. Gould J. E., Khurana S. P., and Li T.: Weld J., 2006,86, 111s-116s.
16. Gould J. E., and Workman D.: Proc. 8th Conf. on ‘Sheet metal welding’, Detroit, MI, USA, May 1998, American Welding Society.
17. Joaquin A., Elliott A., and Jiang C.: Proc. 12th Conf. on ‘Sheet metal welding’, Detroit, MI, USA, May 2006, American Welding Society, Paper1–2.
18. 10.1115/1.213775110.1115/1.2137751 ↗
19. 10.1007/BF0264883210.1007/BF02648832 ↗
20. Goodarzi M., Marashi S. P. H., and Pouranvari M.: J. Mater. Process. Technol, 2008, in press.
21. Zhang H.: Weld 1, 1999, 78, 373s-380s.
22. 10.1179/174329307X24934210.1179/174329307X249342 ↗
23. Pouranvari M., Asgari H. R., Mosavizadeh S. M., Marashi P. H., and Goodarzi M.: Set Technol. Weld Join., 2007, 12,217–225.10.1179/174329307X164409 ↗
24. Pouranvari M., Marashi P., Goodarzi M., and Bahmanpour H.: Proc. Conf. on ‘Materials science and technology 2008’, Pittsburgh, PA, USA, October 2008, AIST, 2465-2475
25. Sun X., Stephens E. V., and Khaleel M. A.: Weld. 1, 2007,86, 18s-25s.
26. Chao Y. J. · Sci. Technol. Weld. Join · 2003 · 8 · 133
27. Zhou M. · Weld. J. · 2003 · 82 · 72
28. Zhou M. · Weld J. · 1999 · 78 · 305s
29. Zhang H., Zhou M., and Hu S. J.: J. Eng. Manuf, 2001,215, (3), 403-414(12).10.1243/0954405011515334 ↗
30. 10.1023/A:100746143006610.1023/A:1007461430066 ↗
31. 10.1201/b1250710.1201/b12507 ↗