journal article·2012-05

Investigation into tensile and compressive responses of Mg–ZnO composites

K S Tun, P Jayaramanavar, Q B Nguyen, J Chan, R Kwok, M Gupta

Materials Science and Technology· Volume 28· Issue 5
Publisher page

Abstract

In the present study, the mechanical properties of magnesium composites containing nano-ZnO particles are investigated. An increase in microhardness was observed with increasing amount of ZnO from 0·5 to 1·5 vol.- in magnesium. The tensile and compressive yield strengths of the composites remained similar to that of Mg. This is attributed to the heterogeneous grain size distribution and the resultant weak basal texture. The tension–compression yield asymmetry was also found to be minimal due to the lack of strong basal texture. The composites showed improved ultimate tensile and compressive strengths, and this is attributed to well known strengthening mechanisms due to the presence of fine reinforcement particles. The tensile failure strain was significantly improved in composites, while there was a compromise in compressive failure strain. The improved tensile failure strain was due to non-basal slip activation through grain refinement and lack of intense basal intensity in composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore

Department of Metallurgical and Materials Engineering, Malaviya National Institute of Technology, Jaipur 302017, India

Singapore Technologies Kinetics Ltd (ST Kinetics), 249 Jalan Boon Lay, Singapore 619523, Singapore

References (47)

Show source-provided references
1. 10.1007/s00170-007-1279-210.1007/s00170-007-1279-2 ↗
2. Mg Showcase, January 2009, (Issue 7), 1–4.
3. Mg Showcase, February 2011, (Issue 15), 1–4.
4. 10.1016/0261-3069(91)90071-B10.1016/0261-3069(91)90071-B ↗
5. 10.1016/j.msea.2004.09.04710.1016/j.msea.2004.09.047 ↗
6. 10.1002/adem.20050020910.1002/adem.200500209 ↗
7. 10.1016/j.compscitech.2007.03.00610.1016/j.compscitech.2007.03.006 ↗
8. 10.1016/j.jallcom.2007.05.03810.1016/j.jallcom.2007.05.038 ↗
9. 10.1016/j.compscitech.2007.10.05710.1016/j.compscitech.2007.10.057 ↗
10. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
11. 10.1016/j.scriptamat.2004.11.02410.1016/j.scriptamat.2004.11.024 ↗
12. 10.1016/j.msea.2006.01.02610.1016/j.msea.2006.01.026 ↗
13. 10.4028/www.scientific.net/MSF.488-489.53510.4028/www.scientific.net/MSF.488-489.535 ↗
14. Robert CS: ‘Magnesium and its alloys’; 1960, New York, Wiley.
15. 10.1016/S1359-6462(01)00996-410.1016/S1359-6462(01)00996-4 ↗
16. 10.1016/j.msea.2004.02.02010.1016/j.msea.2004.02.020 ↗
17. Mg Showcase, April 2009, (Issue 8), 1–4.
18. Mg Showcase, August 2009, (Issue 9), 1–4.
19. 10.1016/j.scriptamat.2004.11.00610.1016/j.scriptamat.2004.11.006 ↗
20. 10.1002/adem.20070016910.1002/adem.200700169 ↗
21. 10.1002/978047082274610.1002/9780470822746 ↗
22. 10.1016/0921-5093(94)09753-410.1016/0921-5093(94)09753-4 ↗
23. Wang XJ · Mater. Sci. Eng. A · 2007 · 465 · 7810.1016/j.msea.2007.03.077 ↗
24. 10.1016/0001-6160(77)90109-210.1016/0001-6160(77)90109-2 ↗
25. 10.1016/0921-5093(91)90576-910.1016/0921-5093(91)90576-9 ↗
26. 10.1016/j.ijplas.2006.03.00410.1016/j.ijplas.2006.03.004 ↗
27. 10.1016/j.msea.2011.01.02010.1016/j.msea.2011.01.020 ↗
28. 10.1016/0956-716X(91)90349-610.1016/0956-716X(91)90349-6 ↗
29. Dieter GE: ‘Mechanical metallurgy’, 214; 1988, London, McGraw-Hill.
30. 10.1016/0025-5416(86)90261-210.1016/0025-5416(86)90261-2 ↗
31. 10.1016/0956-7151(91)90329-Y10.1016/0956-7151(91)90329-Y ↗
32. den Beukel Avan · Scr. Mater. · 1978 · 12 · 809
33. 10.1016/0001-6160(77)90171-710.1016/0001-6160(77)90171-7 ↗
34. McMahon CJ: ‘Structural materials: a textbook with animations’, 73; 2004, Philadelphia, PA, Merion Books.
35. 10.1007/BF0281167910.1007/BF02811679 ↗
36. 10.1016/S0266-3538(03)00215-X10.1016/S0266-3538(03)00215-X ↗
37. 10.1179/174328408X38809510.1179/174328408X388095 ↗
38. Kettunen PO, Kuokkala VT: ‘Plastic deformation and strain hardening’; 2002, Enfield, NH, Trans Tech.
39. 10.1016/S1359-6454(03)00005-310.1016/S1359-6454(03)00005-3 ↗
40. Buch A: ‘Pure metals properties: a scientific-technical handbook’, 119; 1999, Materials Park, OH, ASM International/London, Freund Publishing House.
41. 10.1177/002199831036959110.1177/0021998310369591 ↗
42. 10.1016/j.msea.2010.05.02510.1016/j.msea.2010.05.025 ↗
43. 10.1016/j.actamat.2004.07.01510.1016/j.actamat.2004.07.015 ↗
44. 10.1016/S0921-5093(01)01297-710.1016/S0921-5093(01)01297-7 ↗
45. 10.1016/S1471-5317(01)00010-410.1016/S1471-5317(01)00010-4 ↗
46. Avedesian MM, Baker (eds.) H: ‘ASM specialty handbook: magnesium and magnesium alloys’, 170; 1999, Materials Park, OH, ASM International.
47. 10.1179/mst.1993.9.1.3510.1179/mst.1993.9.1.35 ↗