journal article·2010-12Open access

Semisolid processing of metallic materials

H. V. Atkinson

Materials Science and Technology· Volume 26· Issue 12

Abstract

Semisolid processing involves forming metallic alloys between the solidus and the liquidus. For the process to operate, the microstructure must consist of solid spheroids in the liquid matrix, rather than dendrites. The material then flows when it is sheared but thickens again when allowed to stand, i.e. it behaves thixotropically. This type of behaviour was first discovered by Flemings and co-workers in the 1970s and is utilised in a family of processes, some now applied commercially. Here, the current status of semisolid processing, both technologically and from a research point of view, will be reviewed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of EngineeringUniversity of Leicester, University Road, Leicester LE1 7RH, UK

References (98)

Show source-provided references
1. 10.1007/BF0264258010.1007/BF02642580 ↗
2. Joly P. A. · J. Mater. Sc
3. Quaak C. J. ‘Rheology of partially solidified aluminium alloys and composites’, PhD thesis, Technische Universiteit Delft, Delft, The Netherlands, 1996.
4. Kenney M. P., Courtois J. A., Evans R. D., Farrior G. M., Kyonka C. P., Koch A. A., and Young K. P. ‘Metals handbook’,Vol. 15, 9th edn, 327-338; 1988, Metals Park, OH, ASM International.
5. 10.1007/BF0266109010.1007/BF02661090 ↗
6. 10.1179/imr.1994.39.5.17310.1179/imr.1994.39.5.173 ↗
7. de Figueredo A. (ed.): ‘Science and technology of semi-solid metal processing’; 2001, Rosemont, IL, North American Die Casting Association.
8. 10.1179/09506600122500107610.1179/095066001225001076 ↗
9. Atkinson H. V. · Mater. Sc · 2005 · 341
10. Hirt G., and Kopp R. (eds.): ‘Thixoforming: semi-solid metal processing'; 2009, Weinheim, Wiley-VCH.10.1002/9783527623969 ↗
11. Kirkwood D. H., Suery M., Kapranos P., Atkinson H. V., and Young K. P. ‘Semi-solid processing of alloys’: 2009, Berlin, Springer.10.1007/978-3-642-00706-4 ↗
12. Kiuchi M., and Sugiyama S.: Proc. 2nd Int. Conf. on ‘Processing of semi-solid alloys and composites’, (ed.Brown S. B., and Flemings M. C.), 47-56; 1992, Cambridge, MA, MIT Press.
13. 10.1016/0261-3069(82)90065-610.1016/0261-3069(82)90065-6 ↗
14. Antona P. L. · Metall. Sci. Technol · 1986 · 4 · 49
15. Antona P. L. · Foundry Trade J. Int · 1987 · 173 · 8
16. Abis S.: Proc. 2nd Int. Conf. on ‘Processing of semi-solid alloys and composites’, (ed.Brown S. B., and Flemings M. C.), Addendum; 1992, Cambridge, MA, MIT Press.
17. Ward P. J., Atkinson H. V., Anderson P. R. G., Elias L. G., Garcia B., Kahlen L., and Rodriguez-Ibabe J. M.: Acta Mater. 1996, 44, 1717–1727.10.1016/1359-6454(95)00356-8 ↗
18. Martinez R. A. · ‘A new technique for the formation of semi-solid structures’ · 2001 · MIT
19. ‘Method and apparatus of shaping semisolid metals’, European Patent 0745694A1, UBE Industries Ltd, 1996.
20. Hall K., Kaufmann H., and Mundl A.: Proc. 6th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Chiarmetta G. L., and Rosso M.), 23-28; 2000, Brescia, Edimet Spa.
21. 10.1080/13640461.2003.1181961810.1080/13640461.2003.11819618 ↗
22. 10.1016/S0924-0136(02)00819-110.1016/S0924-0136(02)00819-1 ↗
23. 10.1016/S0924-0136(01)00498-810.1016/S0924-0136(01)00498-8 ↗
24. Apelian D., Makhlouf M., and Saha D.: Mater. Sci. Forum, 2006, 519-521, 1771-1776 (Proc. Conf. ICAA10, Vancouver BC, Canada, July 2006, The University of British Columbia).10.4028/www.scientific.net/MSF.519-521.1771 ↗
25. Young K. P., Kyonka C. P., and Courtois J. A. ‘Fine grained metal composition’, US Patent 4,415,374, 1982.
26. Kirkwood D. H. · European Patent 0305375 B1 · 1992
27. 10.1016/j.msea.2004.12.01310.1016/j.msea.2004.12.013 ↗
28. Kaneuchi T., Shibata R., and Ozawa M.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y.), 145-150; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
29. Jorstad J.: Solid State Phenom., 2006, 116-117, 24-33 [Proc. 9th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Kang C. G. et al); 2006, Zurich, Trans Tech Publ.].10.4028/3-908451-26-4.24 ↗
30. Peng H., Wang S. P., Wang N., and Wang K. K.: Proc. 3rd Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Kiuchi M.), 191-200; 1994, Tokyo, Tokyo Institute of Industrial Science.
31. Peng H., and Hsu W. M.: Proc. 6th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Chiarmetta G. L., and Rosso M.), 313-317; 2000, Brescia, Edimet Spa.
32. Fan Z. · Patent PCT/WO/ 01/21343A1 · 1999
33. 10.1016/S0921-5093(00)01373-310.1016/S0921-5093(00)01373-3 ↗
34. 10.1007/s11661-006-0049-310.1007/s11661-006-0049-3 ↗
35. Kopp R., Neudenberger D., Wimmer M., and Winning G.: Proc. 5th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Bhasin A. K. et al), 165-172; 1998, Golden, CO, Colorado School of Mines.
36. 10.1016/S0924-0136(01)00495-210.1016/S0924-0136(01)00495-2 ↗
37. Favier V., and Atkinson H. V. ‘Analysing the semi-solid response under rapid compression tests using multiscale modelling and experiments’, Proc. 11th Int. Conf. on ‘Semi-solid processing of alloys and composites’, Beijing, China, September 2010, Trans Nonferrous Met, Soc, China, 2010,20, (9), 1691–169.510.1016/S1003-6326(09)60359-9 ↗
38. 10.1016/S0377-0257(97)00004-910.1016/S0377-0257(97)00004-9 ↗
39. 10.1016/S0377-0257(03)00080-610.1016/S0377-0257(03)00080-6 ↗
40. 10.1007/s11661-003-0342-310.1007/s11661-003-0342-3 ↗
41. Loué W. R. · ‘Evaluation Microstructurale et Comportement Rhéologique d'Alliages Al-Si á l'État Semi-Solide’ · 1992 · Grenoble
42. 10.1016/0921-5093(91)90403-A10.1016/0921-5093(91)90403-A ↗
43. Turng L. S. · J. Mater. Sc
44. Ito Y., Flemings M. C., and Cornie J. A.: in ‘Nature and properties of semi-solid materials’, (ed.Sekhar J. A., and Dantzig J.), 3-17; 1991, Warrendale, PA, The Minerals, Metals and Materials Society.
45. Kumar P. · ‘Constitutive modeling and characteristics in the flow behaviour of semi-solid metal alloy slurries’ · 1994
46. Peng H., and Wang K. K.: Proc 4th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Kirkwood D. H., and Kapranos P.), 2-9; 1996, Sheffield, University of Sheffield.
47. 10.1016/0921-5093(96)10212-410.1016/0921-5093(96)10212-4 ↗
48. 10.1016/0921-5093(96)10213-610.1016/0921-5093(96)10213-6 ↗
49. Azzi L., Ajersch F., and Stephenson T. F.: Proc. 6th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Chiarmetta G. L., and Rosso M.), 527-532; 2000, Brescia, Edimet Spa.
50. 10.1023/A:100985670851110.1023/A:1009856708511 ↗
51. 10.1016/S0924-0136(01)00496-410.1016/S0924-0136(01)00496-4 ↗
52. 10.1016/j.jnnfm.2009.01.00510.1016/j.jnnfm.2009.01.005 ↗
53. Modigell M., Pape L., and Maier H. R.: Proc. 9th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Kang C. G.), 2006, Zurich, Trans Tech Publ.; Solid State Phenom., 2006, 116-117,606–609.10.4028/www.scientific.net/SSP.116-117.606 ↗
54. 10.1007/BF0265511210.1007/BF02655112 ↗
55. Loué W. R., Suéry M., and Querbes J. L.: Proc. 2nd Int. Conf. on ‘Processing of semi-solid alloys and composites’, (ed.Brown S. B., and Flemings M. C.), 266-275; 1992, Cambridge, MA, MIT Press.
56. 10.1007/s11661-002-0396-710.1007/s11661-002-0396-7 ↗
57. 10.1007/s11661-003-0266-y10.1007/s11661-003-0266-y ↗
58. 10.4028/www.scientific.net/SSP.116-117.67710.4028/www.scientific.net/SSP.116-117.677 ↗
59. 10.1016/j.msea.2009.03.01810.1016/j.msea.2009.03.018 ↗
60. 10.1016/0956-7151(94)90426-X10.1016/0956-7151(94)90426-X ↗
61. Martin C. L., Kumar P., and Brown S.: Acta MetalL Mater. 1994, 42, 3603–3614.10.1016/0956-7151(94)90427-8 ↗
62. 10.1007/BF0265724110.1007/BF02657241 ↗
63. Ward P. J., Atkinson H. V., Kirkwood D. H., and Chin S. B. ‘Modelling thixotropic flow of metal alloys into a die’, Final report for Engineering and Physical Sciences Research Council Project (GR/M17334/01), 2002, www.le.ac.uk/engineering/staff/atkinson_files/modelling_final_report.pdf
64. 10.1016/S0924-0136(99)00441-010.1016/S0924-0136(99)00441-0 ↗
65. Seo P. K., and Kang C. G.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y. et al), 515-520; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
66. 10.1016/S0924-0136(99)00316-710.1016/S0924-0136(99)00316-7 ↗
67. 10.1122/1.55099310.1122/1.550993 ↗
68. 10.1016/S0377-0257(00)00199-310.1016/S0377-0257(00)00199-3 ↗
69. 10.1016/S0924-0136(00)00731-710.1016/S0924-0136(00)00731-7 ↗
70. Alexandrou A. N., Pan Y., Apelian D., and Georgiou G.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y.), 417-422; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
71. 10.1088/0965-0393/11/4/30910.1088/0965-0393/11/4/309 ↗
72. 10.1016/S0020-7403(98)00011-310.1016/S0020-7403(98)00011-3 ↗
73. Koke J. · Appl. Mech. Eng · 1999 · 4 · 345
74. 10.1016/S0020-7403(98)00107-610.1016/S0020-7403(98)00107-6 ↗
75. Binet B. · Proc. Conf. on ‘Mathematical modelling in metal processing and manufacturing-COM 2000’, (ed.
76. 10.1016/S0924-0136(00)00575-610.1016/S0924-0136(00)00575-6 ↗
77. 10.1007/s11663-001-0014-x10.1007/s11663-001-0014-x ↗
78. 10.1016/S0924-0136(01)00677-X10.1016/S0924-0136(01)00677-X ↗
79. Kopp R., and Horst M.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y. et al), 719-724; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
80. Modigell M., Kopp R., Sahm P. R., Neuschutz D., and Petera J.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y. et al), 77-82; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
81. Petera J., Modigell M., and Hufschmidt M.: Proc. 5th ESAFORM Conf. on ‘Material forming’, (ed.Pietrzyk M. et al), 675-678; 2002, Kraków, Akademia Górniczo-Hutnicza.
82. 10.1007/s11837-006-0174-x10.1007/s11837-006-0174-x ↗
83. Atkinson H. V., and Liu D.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y. et al), 51-56; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
84. Lecomte-Beckers J. · Proc. 9th Int. Conf. on ‘Semi-solid processing of alloys and composites’ · 2006 · 116 · 54
85. Fraipont C., and Lecomte-Beckers J.: Solid State Phenom., 2008, 141-143,523–527. [Proc. 10th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed. Hirt G. et al); 2008, Zurich, Trans Tech Publ.10.4028/www.scientific.net/SSP.141-143.523 ↗
86. 10.1016/S0921-5093(03)00528-810.1016/S0921-5093(03)00528-8 ↗
87. Witulski T., Morjan U., and Niedick I.: Proc. 5th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Bhasin A. K. et al), 353-360; 1998, Golden, CO, Colorado School of Mines.
88. Tzimas E. · Proc. Int. Conf. on ‘Synthesis of lightweight metals III’, (ed.
89. Kazakov A. A. · Adv. Mater. Processes · 2000 · 157 · 31
90. Atkinson H. V., Kapranos P., and Kirkwood D. H.: Proc. 6th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Chiarmetta G. L., and Rosso M.), 443-450; 2000, Brescia, Edimet Spa.
91. Atkinson H. V.: Proc. 5th ESAFORM Conf. on ‘Material forming’, (ed.Pietrzyk M. et al), 655-658; 2002, Krakow, Akademia Górniczo-Hutnicza.
92. Liu Y. Q., Fan Z., and Patel J.: Proc. 7th Int. Conf. on ‘Advanced semi-solid processing of alloys and composites’, (ed.Tsutsui Y. et al), 599-604; 2002, Tsukuba, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity.
93. 10.1179/02670830422501197310.1179/026708304225011973 ↗
94. Camacho A. M., Kapranos P., and Atkinson H. V.: Acta Mater. 2003, 51, 2319–2330.10.1016/S1359-6454(03)00040-5 ↗
95. Liu D., Atkinson H. V., and Jones H.: Acta Mater. 2005, 53, 3807–3819.10.1016/j.actamat.2005.04.028 ↗
96. 10.1007/s12289-010-0889-710.1007/s12289-010-0889-7 ↗
97. Kapranos P., Kirkwood D. H., and Mani P. H.: Proc. 5th Int. Conf. ‘Semi-solid processing of alloys and composites’, (ed.Bhasin A. K.), 431-438; 1998, Golden, CO, Colorado School of Mines.
98. 10.1063/1.272967610.1063/1.2729676 ↗