journal article·2013-06

Life assessment methodologies incoroporating shot peening process effects: Mechanistic consideration of residual stresses and strain hardening Part 1 – effect of shot peening on fatigue resistance

K A Soady

Materials Science and Technology· Volume 29· Issue 6
Publisher page

Abstract

Shot peening is a well known process applied to components in order to improve their fatigue resistance. In recent years, there has been an increasing interest in including the effects of the shot peening process in life assessment models since this would allow a reduction in conservatism compared to those in current application. The present paper seeks to review firstly the effects of the shot peening process (surface roughening, strain hardening and compressive residual stresses) and how the magnitude of these effects can be determined both experimentally and numerically. The reasons for the beneficial effect of shot peening on fatigue resistance are reviewed; this includes consideration of how different operating conditions can affect the magnitude of the benefit. The second part of the review details the life assessment approaches which have been developed to date incorporating these effects and seeks to identify the areas in which further development is still required before the models can be applied in structural integrity assessments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering and the Environment University of Southampton SO17 1BJ, UK

E.ON New Build and Technology NG11 0EE, UK

References (100+)

Show source-provided references
1. Suresh S: ‘Fatigue of materials’, 2nd edn; 2004, Cambridge, Cambridge University Press.
2. 10.1002/352760781110.1002/3527607811 ↗
3. ‘Shot peening applications’, 9th edn; 2005, Paramus, NJ, Metal Improvement Company.
4. 10.1016/S0168-874X(98)00057-210.1016/S0168-874X(98)00057-2 ↗
5. ESDU: ‘Guide to the effect of shot peening on fatigue strength’, ESDU Guide 92015, 1992.
6. 10.1016/j.ijfatigue.2008.11.01710.1016/j.ijfatigue.2008.11.017 ↗
7. 10.1016/j.actamat.2011.04.02510.1016/j.actamat.2011.04.025 ↗
8. Clausen R, Stangenberg J: ‘Roughness of shot peened surfaces – definition and measurement’, Proc. International Scientific Committee on Shot Peening-7, Warsaw, Poland, September 1999, International Scientific Committee on Shot Peening, 69–77.
9. 10.1016/j.msea.2011.08.00310.1016/j.msea.2011.08.003 ↗
10. Vaxevanidis NM, Manolakos DE, Koutsomichalis A, Petropoulos G, Panagotas A, Sideris I, Mourlas A, Antoniou SS: ‘The effect of shot peening on surface integrity and tribological behaviour of tool steels’, AITC-AIT, Proc. Int. Conf. on ‘Tribology’, Parma, Italy, September 2006.
11. Prevéy PS: ‘The measurement of subsurface residual stress and cold work distributions in nickel base alloys’, in ‘Residual stress in design, process and materials selection’, 11–19; 1987, Metals Park, OH, ASM.
12. 10.1016/j.jmatprotec.2006.09.03710.1016/j.jmatprotec.2006.09.037 ↗
13. 10.1243/030932405X779110.1243/030932405X7791 ↗
14. 10.1016/S1359-6462(01)00738-210.1016/S1359-6462(01)00738-2 ↗
15. 10.1179/174328409X41897310.1179/174328409X418973 ↗
16. 10.1016/S0921-5093(98)01121-610.1016/S0921-5093(98)01121-6 ↗
17. 10.1007/s11661-005-0076-510.1007/s11661-005-0076-5 ↗
18. 10.1016/j.engfailanal.2006.02.01110.1016/j.engfailanal.2006.02.011 ↗
19. Zimmerman M · Int. J. Comp. Mater. Sci. Surf. Eng. · 2010 · 3 · 289
20. 10.1179/1743284713Y.000000022310.1179/1743284713Y.0000000223 ↗
21. 10.1111/j.1460-2695.2007.01102.x10.1111/j.1460-2695.2007.01102.x ↗
22. 10.1179/02670830110150998010.1179/026708301101509980 ↗
23. 10.31399/asm.hb.v10.a000176110.31399/asm.hb.v10.a0001761 ↗
24. 10.1007/s11661-002-0186-210.1007/s11661-002-0186-2 ↗
25. 10.1016/j.ijfatigue.2005.07.02710.1016/j.ijfatigue.2005.07.027 ↗
26. 10.1016/j.proeng.2010.03.06610.1016/j.proeng.2010.03.066 ↗
27. 10.1016/j.ijfatigue.2003.12.00310.1016/j.ijfatigue.2003.12.003 ↗
28. 10.1016/j.proeng.2010.03.04810.1016/j.proeng.2010.03.048 ↗
29. Bergström J, Ericsson T: ‘Relaxation of shot peening induced compressive stress during fatigue of notched steel samples’, Proc. International Scientific Committee on Shot Peening-2, Chicago, IL, USA, 1984, American Shot Peening Society, 241–248.
30. 10.1007/BF0241049510.1007/BF02410495 ↗
31. 10.1016/S0924-0136(97)00213-610.1016/S0924-0136(97)00213-6 ↗
32. Zinn W, Scholtes B: ‘Influence of shot velocity and shot size on Almen intensity and residual stress depth distributions’, Proc. International Scientific Committee on Shot Peening-9, Paris, France, September 2005, Institute for Industrial Technology Transfer, 379–384.
33. 10.1016/S0142-1123(01)00205-510.1016/S0142-1123(01)00205-5 ↗
34. 10.1016/j.msea.2010.09.05010.1016/j.msea.2010.09.050 ↗
35. 10.1016/S1359-6462(01)01063-610.1016/S1359-6462(01)01063-6 ↗
36. Ezeilo A, Webster G, Webster PJ, Webster PS: ‘Comparison of shot peening residual stress distributions in a selection of materials’, Proc. International Scientific Committee on Shot Peening-5, Oxford, UK, September 1993, 275–282.
37. 10.1007/s00170-007-1222-610.1007/s00170-007-1222-6 ↗
38. 10.1016/S0013-7944(03)00017-110.1016/S0013-7944(03)00017-1 ↗
39. 10.1016/0921-5093(91)90843-C10.1016/0921-5093(91)90843-C ↗
40. 10.1017/CBO978113917173110.1017/CBO9781139171731 ↗
41. Shen S · Comput. Mater. Cont. · 2006 · 4 · 75
42. 10.1016/j.matdes.2008.07.04010.1016/j.matdes.2008.07.040 ↗
43. 10.1179/mst.1998.14.7.63110.1179/mst.1998.14.7.631 ↗
44. Le Guernic Y, Eckersley JS: ‘Peenstress software selects shot peening parameters’, International Scientific Committee on Shot Peening-6, San Francisco, CA, USA, 1996, 481–492.
45. 10.1002/nme.162015020610.1002/nme.1620150206 ↗
46. Rouhaud E, Ouakka A, Ould C, Chaboche J.L, François M: ‘Finite elements model of shot peening, effects of constitutive laws of the material’, Proc. International Scientific Committee on Shot Peening-9, Paris, France, September 2005, Institute for Industrial Technology Transfer, 107–112.
47. 10.1016/j.msea.2006.03.09710.1016/j.msea.2006.03.097 ↗
48. 10.1016/S0734-743X(01)00043-410.1016/S0734-743X(01)00043-4 ↗
49. 10.1243/095440504241841910.1243/0954405042418419 ↗
50. 10.1016/j.jmatprotec.2005.02.13910.1016/j.jmatprotec.2005.02.139 ↗
51. 10.1115/1.271246910.1115/1.2712469 ↗
52. 10.1016/j.engfailanal.2007.11.01710.1016/j.engfailanal.2007.11.017 ↗
53. 10.1016/j.advengsoft.2007.10.00210.1016/j.advengsoft.2007.10.002 ↗
54. 10.1016/j.jmatprotec.2008.10.00110.1016/j.jmatprotec.2008.10.001 ↗
55. 10.1016/j.jmatprotec.2011.01.01110.1016/j.jmatprotec.2011.01.011 ↗
56. 10.1017/CBO978113916797010.1017/CBO9781139167970 ↗
57. Totten G, Howes M, Inoue T: ‘Handbook of residual stress and deformation of steel’; 2002, Materials Park, OH, ASM.
58. 10.1016/S0921-5093(98)00522-X10.1016/S0921-5093(98)00522-X ↗
59. Menig R: ‘Randschichtzustand, Eigenspannungsstabilität und Schwingfestigkeit von unterschiedlich wärmebehandeltem 42 CrMo 4 nach modifizierten Kugelstrahlbehandlungen’, PhD thesis, University of Karlsruhe, 2002.
60. 10.1115/1.318408310.1115/1.3184083 ↗
61. Tosha K, Iida K: ‘Residual stress and hardness distribution induced by shot peening’, Proc. International Scientific Committee on Shot Peening-4, Tokyo, Japan, October 1990, The Japan Society of Engineering, 379–388.
62. 10.1016/j.corsci.2008.04.00810.1016/j.corsci.2008.04.008 ↗
63. Prevéy PS: ‘The uniformity of shot peening induced residual stress’, in ‘Residual stress for designers and metallurgists’, 151–168; 1981, Metals Park, OH, ASM.
64. Prevéy PS: ‘X-ray diffraction characterisation of residual stresses produced by shot peening’, in ‘Shot peening theory and application’, (ed. , Niku-Lari A, ed), 81–93; 1990, Gournay-Sur-Marne, IITT International.
65. Tosha K: ‘Characteristics of shot peened surfaces and surface layers’, Proc. Asia-Pacific Forum on ‘Precision surface finishing and deburring technology’, Singapore, Metal Industries Research and Development Centre, November, 2001, 193–201.
66. 10.1046/j.1460-2695.2000.00287.x10.1046/j.1460-2695.2000.00287.x ↗
67. 10.1007/BF0291343310.1007/BF02913433 ↗
68. 10.1016/j.actamat.2006.06.03210.1016/j.actamat.2006.06.032 ↗
69. 10.1016/S1359-6454(98)00010-X10.1016/S1359-6454(98)00010-X ↗
70. 10.1103/PhysRev.56.97810.1103/PhysRev.56.978 ↗
71. 10.1088/0959-5309/56/3/30310.1088/0959-5309/56/3/303 ↗
72. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
73. 10.1016/j.matchar.2010.05.00610.1016/j.matchar.2010.05.006 ↗
74. 10.1016/j.nucengdes.2004.11.00610.1016/j.nucengdes.2004.11.006 ↗
75. 10.1016/j.actamat.2005.08.04610.1016/j.actamat.2005.08.046 ↗
76. ESDU: The effect of surface roughness on the fatigue limit of steels at zero mean stress’, ESDU Guide 74027, 1974.
77. 10.1016/j.ijmachtools.2003.10.01810.1016/j.ijmachtools.2003.10.018 ↗
78. Koster W: ‘Effect of residual stress on fatigue of structural alloys’, Proc. 3rd Int. Conf. on ‘Practical application of residual stress technology’, Indianapolis, IN, USA, May 1991, ASM, 1–9.
79. 10.1111/j.1460-2695.1991.tb00662.x10.1111/j.1460-2695.1991.tb00662.x ↗
80. 10.1088/0034-4885/70/12/R0410.1088/0034-4885/70/12/R04 ↗
81. 10.1016/S0142-1123(01)00133-510.1016/S0142-1123(01)00133-5 ↗
82. 10.1016/0142-1123(95)00044-T10.1016/0142-1123(95)00044-T ↗
83. 10.1016/j.actamat.2011.03.01310.1016/j.actamat.2011.03.013 ↗
84. 10.1111/j.1460-2695.1987.tb00205.x10.1111/j.1460-2695.1987.tb00205.x ↗
85. 10.1111/j.1460-2695.1995.tb00906.x10.1111/j.1460-2695.1995.tb00906.x ↗
86. 10.1016/S0013-7944(99)00010-710.1016/S0013-7944(99)00010-7 ↗
87. Wagner L: ‘Effect of mechanical surface treatments on fatigue performance of titanium alloys’, in ‘Fatigue behaviour of titanium alloys’, 253–265; 1999, Warrendale, PA, TMS.
88. 10.1023/A:101865591705110.1023/A:1018655917051 ↗
89. 10.1016/S0924-0136(01)00601-X10.1016/S0924-0136(01)00601-X ↗
90. 10.1016/S0921-5093(98)01168-X10.1016/S0921-5093(98)01168-X ↗
91. 10.1016/j.ijfatigue.2012.01.01910.1016/j.ijfatigue.2012.01.019 ↗
92. 10.1111/j.1460-2695.1996.tb00936.x10.1111/j.1460-2695.1996.tb00936.x ↗
93. Dörr T, Wagner L: ‘Influence of stress gradient on fatigue behaviour of shot peened Timetal 1100’, Proc. International Scientific Committee on Shot Peening-6, San Francisco, CA, September 1996, 223–232.
94. 10.1115/1.186798610.1115/1.1867986 ↗
95. 10.1016/S0142-1123(01)00132-310.1016/S0142-1123(01)00132-3 ↗
96. Morrow JD, Sinclair GM: ‘Cycle-dependent stress relaxation’, in ‘Basic mechanisms of fatigue’, STP 237, ASTM, Warrendale, PA, USA, 1958, 83–103.10.1520/STP39312S ↗
97. Kodama S: ‘The behaviour of residual stress during fatigue stress cycles’, Proc. Int. Conf. on ‘Mechanical behaviour of metals II’, Kyoto, Japan, 1972, Society of Material Science, 111–118.
98. 10.1016/j.msea.2010.07.01010.1016/j.msea.2010.07.010 ↗
99. 10.1016/j.surfcoat.2011.12.00810.1016/j.surfcoat.2011.12.008 ↗
100. Bathias C, Bonnafe JP, Lebrun JL, Maeder G: ‘X-ray diffraction and acoustic emission study of fatigue damage in aluminium alloys’, in ‘Analytical and experimental methods for residual stress effects in fatigue’, STP 1004, ASTM, Warrendale, PA, USA, 1988, 25–36.10.1520/STP17170S ↗