journal article·2011-08

Microstructure and mechanical properties of TiC/Ti–6Al–4V composites processed by in situ casting route

Z J Wei, L Cao, H W Wang, C M Zou

Materials Science and Technology· Volume 27· Issue 8
Publisher page

Abstract

TiC/Ti–6Al–4V composites containing various volume fractions of TiC were produced by induction skull melting and common casting utilising in situ reaction between titanium and carbon powder. The microstructure and room tensile properties of as cast and heat treated TiC/Ti–6Al–4V composites were investigated. Bar-like or small globular eutectic TiC were found in 5 vol.-TiC/Ti–6Al–4V composite, whereas the equiaxed or dendritic primary TiC particles were found to be the main reinforcements in 10 and 15 vol.-TiC/Ti–6Al–4V composites. The as cast TiC/Ti–6Al–4V composites have shown higher strength but lower ductility than those of monolithic Ti–6Al–4V alloy. The shape and fracture of TiC particles can strongly influence the fracture and failure of the composites, and so the ultimate tensile strengths and elongations of as cast composites reduce with the increase in volume fraction of TiC. TiC particles appear to be spheroidised, and titanium precipitation can be found within large TiC particles after heat treatment at 1050°C for 8 h, which can promote the resistance to fracture of composites. Therefore, the elongations of the composites increase significantly, and the ultimate tensile strengths also have marginal increase especially for the 10 and 15 vol.-TiC/Ti–6Al–4V composites after heat treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering Harbin Institute of Technology, PO box 434, Harbin 150001, China

References (41)

Show source-provided references
1. Ranganath S · J. Mater. Sci. · 1997 · 32 · 1
2. 10.1002/(SICI)1527-2648(200003)2:3<85::AID-ADEM85>3.0.CO;2-U10.1002/(SICI)1527-2648(200003)2:3<85::AID-ADEM85>3.0.CO;2-U ↗
3. 10.1007/s10853-006-0776-210.1007/s10853-006-0776-2 ↗
4. 10.1016/S1359-6454(02)00510-410.1016/S1359-6454(02)00510-4 ↗
5. 10.1016/S0026-0657(06)70736-610.1016/S0026-0657(06)70736-6 ↗
6. 10.1016/j.compscitech.2007.07.01610.1016/j.compscitech.2007.07.016 ↗
7. 10.1007/s11837-004-0126-210.1007/s11837-004-0126-2 ↗
8. 10.1007/s11837-004-0125-310.1007/s11837-004-0125-3 ↗
9. 10.1007/BF0322145710.1007/BF03221457 ↗
10. 10.1179/mst.1996.12.4.36210.1179/mst.1996.12.4.362 ↗
11. 10.1007/BF0267257310.1007/BF02672573 ↗
12. 10.1016/S1359-6462(99)00354-110.1016/S1359-6462(99)00354-1 ↗
13. 10.1016/S0921-5093(01)01412-510.1016/S0921-5093(01)01412-5 ↗
14. 10.1016/S1359-835X(99)00092-510.1016/S1359-835X(99)00092-5 ↗
15. 10.1016/0956-716X(91)90225-P10.1016/0956-716X(91)90225-P ↗
16. 10.1007/BF0265899510.1007/BF02658995 ↗
17. 10.1016/0921-5093(92)90386-F10.1016/0921-5093(92)90386-F ↗
18. Abkowitz S: US patent no. 5897830, 1999.
19. Lu WJ · Mater. Sci. Eng. A · 2001 · 311 · 14210.1016/S0921-5093(01)00910-8 ↗
20. 10.1016/S1359-835X(96)00136-410.1016/S1359-835X(96)00136-4 ↗
21. 10.1016/1359-6462(96)00258-810.1016/1359-6462(96)00258-8 ↗
22. 10.1016/0956-716X(94)90141-410.1016/0956-716X(94)90141-4 ↗
23. 10.1002/1527-2648(20021105)4:11<847::AID-ADEM847>3.0.CO;2-C10.1002/1527-2648(20021105)4:11<847::AID-ADEM847>3.0.CO;2-C ↗
24. 10.1007/s11661-004-0162-010.1007/s11661-004-0162-0 ↗
25. 10.1007/BF0118498210.1007/BF01184982 ↗
26. 10.1179/02670830222500480110.1179/026708302225004801 ↗
27. 10.1179/02670839910150539210.1179/026708399101505392 ↗
28. 10.1023/A:101098102911010.1023/A:1010981029110 ↗
29. Storms EK: ‘Refractory materials’, Vol. 2, ‘The refractory carbides’, 1st edn, 6–9; 1971, New York, Academic Press.
30. Miracle D · J. Am. Ceram. Soc. · 1983 · 665 · 92
31. 10.17918/0000049310.17918/00000493 ↗
32. Murray JL, Massalski TB, Bennett LL, Baker H: ‘Binary alloy phase diagrams’, 593–596; 1986, Metals Park, OH, ASM International.
33. 10.1016/0956-716X(94)90547-910.1016/0956-716X(94)90547-9 ↗
34. 10.1016/j.compscitech.2005.03.00510.1016/j.compscitech.2005.03.005 ↗
35. 10.1016/0036-9748(86)90210-310.1016/0036-9748(86)90210-3 ↗
36. 10.1016/0036-9748(87)90105-010.1016/0036-9748(87)90105-0 ↗
37. Ogden HR · J. Met. · 1955 · 203 · 73
38. 10.1007/s11661-003-0152-710.1007/s11661-003-0152-7 ↗
39. 10.1007/s10853-006-0193-610.1007/s10853-006-0193-6 ↗
40. 10.1017/CBO9780511623080.00510.1017/CBO9780511623080.005 ↗
41. Martin JW, Doherty RD: ‘Stability of microstructure in metallic systems’, 1–5; 1976, Cambridge, Cambridge University Press.