Microstructural examination of two experimental high-strength bainitic low-alloy steels containing silicon
Source abstract
Abstract
A detailed microstructural characterization of two silicon-containing low-alloy steels, Fe–0·2C–2Si–3Mn and Fe–0·4C–2Si–4Ni (nominal wt-%), isothermally transformed in the bainitic temperature range (~ 400–250°C), has been carried out using principally electron microscopy, X-ray diffraction, and dilatometry. Upper bainite in these silicon-containing steels consists of bainitic ferrite laths and interwoven thin films of retained austenite instead of cementite. Coarser granular regions of retained austenite may also be obtained. The bainitic ferrite laths (or plates) in lower bainitic structures contain intralath carbides, but the interlath morphology of retained austenite still occurs. The variations in these microstructures with isothermal transformation temperature, and the thermal stability of the retained austenite phase is described and discussed.MST/526
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. 10.1179/03063458379042064610.1179/030634583790420646 ↗
2. V. T. T. MIIHKINEN and D. V. EDMONDS: in ‘Advances in fracture research’, Vol. 2, (ed. D. Francois), 1481; 1984, Oxford, Pergamon Press.10.1016/B978-1-4832-8440-8.50138-1 ↗
3. MATAS S. J. · Trans AIME · 1961 · 221 · 179
4. R. F. HEREMANN: in ‘Phase transformations’, 397; 1970, Metals Park, Ohio, American Society for Metals.
5. 10.1007/BF0264239110.1007/BF02642391 ↗
6. MIIHKINEN V. T. T. · Mater. Sci. Technol., this issue, 432
7. MIIHKINEN V. T. T. · Mater. Sci. Technol., this issue, 441
8. 10.1107/S002188986900688110.1107/S0021889869006881 ↗
9. V. T. T. MIIHKINEN: PhD Dissertation, University of Oxford, 1983.
10. 10.1007/BF0264639610.1007/BF02646396 ↗
11. 10.1179/03063457979043830910.1179/030634579790438309 ↗
12. RIDLEY N. · Trans. AIME · 1969 · 245 · 1834
13. 10.1007/BF0264230810.1007/BF02642308 ↗
14. Le R. · Metall. Trans., · 1971 · 2 · 264510.1007/BF02814908 ↗
15. SEILSTORFER H. · Arch. Eisenhiittenwes., · 1974 · 45 · 623
16. NuANG D. H. · Metall. Trans., · 1977 · 8 · 166110.1007/BF02646868 ↗
17. DORAZIL E. · Arch. Eisenhattenwes., · 1979 · 50 · 293
18. 10.1179/03071698180327599210.1179/030716981803275992 ↗
19. 10.1007/BF0265456810.1007/BF02654568 ↗
20. F. B. PICKEIUNG: ‘Physical metallurgy and the design of steels’, 112; 1978, London, Applied Science.
21. NAYLOR J. P. · Metall. Trans., · 1974 · 5 · 169910.1007/BF02646352 ↗
22. 10.1007/BF0266194410.1007/BF02661944 ↗
23. ROBERTS M. J. · Metall. Trans., · 1970 · 1 · 328710.1007/BF03037855 ↗
24. 10.1007/BF0281198310.1007/BF02811983 ↗
25. KAMADA A. · Trans. Iron Steel Inst. Jpn · 1976 · 16 · 40710.2355/isijinternational1966.16.407 ↗
26. LESLIE W. C. · Trans ASM · 1964 · 57 · 972
27. 10.1007/BF0264411410.1007/BF02644114 ↗
28. 10.1179/03063458179042661510.1179/030634581790426615 ↗
29. KELLY P. M. · J. Iron Steel Inst., · 1961 · 197 · 199
30. R. G. · Metall. Trans., · 1972 · 3 · 104310.1007/BF02642436 ↗