Kinetics of rafting in a single crystal superalloy: Effects of residual microsegregation
Source abstract
Abstract
The kinetics of directional γ′ coarsening, known as rafting, are examined in the nickel based single crystal superalloy CMSX-4. Electron microscopy and image analysis are used to characterise heat treated specimens, prestrained in creep to a plastic strain beyond the threshold required to initiate rafting. The kinetics of rafting are found to be sensitive to the presence of microsegregation from casting, incompletely removed by the heat treatment process; thus the dendritic regions raft appreciably faster than the interdendritic ones – this despite rhenium enrichment at the dendrite cores consistent with its preferred partitioning during solidification. Estimates of the activation energy required for rafting in the two regions are established and Avrami-type equations developed. Since the important γ′ forming elements aluminium and tantalum are known to partition interdendritically causing an enhanced γ′ fraction, it is suggested that the correspondingly smaller γ channel width so caused is responsible for the greater resistance to rafting displayed by the interdendritic regions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Reed R. C. ‘Superalloys: fundamentals and applications'; 2006, Cambridge, Cambridge University Press.10.1017/CBO9780511541285 ↗
2. Webster G. A. · J. Inst. Met · 1967 · 95 · 138
3. 10.1007/BF0264322710.1007/BF02643227 ↗
4. 10.1016/0036-9748(83)90287-910.1016/0036-9748(83)90287-9 ↗
5. 10.1016/S1359-6454(03)00224-610.1016/S1359-6454(03)00224-6 ↗
6. 10.1016/j.msea.2004.01.11410.1016/j.msea.2004.01.114 ↗
7. 10.1007/s11661-004-0001-310.1007/s11661-004-0001-3 ↗
8. Kondo Y., Kitazaki N., and Mori H.: in ‘Superalloys 1996’, (ed.Kissinger D. et al), 297-304; 1996, Warrendale, PA, The Metallurgical Society of AIME.10.7449/1996/Superalloys_1996_297_304 ↗
9. 10.1007/BF0264894210.1007/BF02648942 ↗
10. 10.1016/S1359-6454(99)00093-210.1016/S1359-6454(99)00093-2 ↗
11. 10.1016/1359-6462(96)00062-010.1016/1359-6462(96)00062-0 ↗
12. 10.1007/BF0266334710.1007/BF02663347 ↗
13. Fredholm A., and Strudel J. L.: in ‘Superalloys 1984’, (ed. M. Gell et al), 211-220; 1984, Warrendale, PA, The Metallurgical Society of AIME.10.7449/1984/Superalloys_1984_211_220 ↗
14. 10.1016/0001-6160(77)90092-X10.1016/0001-6160(77)90092-X ↗
15. 10.1016/0001-6160(78)90035-410.1016/0001-6160(78)90035-4 ↗
16. 10.1016/0956-7151(94)00432-H10.1016/0956-7151(94)00432-H ↗
17. 10.1016/0025-5416(85)90189-210.1016/0025-5416(85)90189-2 ↗
18. 10.1016/0956-716X(92)90648-X10.1016/0956-716X(92)90648-X ↗
19. Karunaratne M. S. A., Cox D. C., Carter P., and Reed R. C.: in ‘Superalloys 2000’, (ed. T. M. Pollock et al), 263-273; 2000, Warrendale, PA, The Metallurgical Society of AIME.10.7449/2000/Superalloys_2000_263_272 ↗
20. UDC British Standard 629.7, The British Standards Institute, London, UK, 1965.
21. Reed S. J. B. ‘Electron microprobe analysis’; 1975, Cambridge, Cambridge University Press.
22. 10.1016/0956-7151(93)90019-O10.1016/0956-7151(93)90019-O ↗
23. 10.1016/S0921-5093(98)00516-410.1016/S0921-5093(98)00516-4 ↗
24. 10.1016/0956-7151(94)90011-610.1016/0956-7151(94)90011-6 ↗
25. Buffiere J. Y. · Scr. Metall · 1996 · 34 · 349
26. 10.1016/S0921-5093(99)00623-110.1016/S0921-5093(99)00623-1 ↗
27. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗
28. Brückner U., Epishin A., Link T., and Portella P.: Proc. 5th European Conf. on ‘Residual stresses’, Delft-Noordwijkerhout, The Netherlands, September 1999,Vol. 3, 363-367; 2000, Zurich, Trans Tech Publications.10.4028/www.scientific.net/MSF.347-349.363 ↗
29. Brückner U. · Acta Metall · 1997 · 45 · 5223
30. Bruckner U., Epishin A., Link T., and Dressel K.: Mater. Sci. Eng. A, 1998, A247,23–31.10.1016/S0921-5093(97)00856-3 ↗
31. Völkl R. · Acta Metall · 1998 · 46 · 4395
32. 10.1016/0956-716X(94)90284-410.1016/0956-716X(94)90284-4 ↗
33. 10.1016/0956-716X(94)90285-210.1016/0956-716X(94)90285-2 ↗
34. 10.1016/S1359-6454(03)00105-810.1016/S1359-6454(03)00105-8 ↗
35. Karunaratne M. S. A., Carter P., and Reed R. C.: Mater. Sci. Eng. A, 2000, A281,229–233.10.1016/S0921-5093(99)00705-4 ↗
36. 10.4028/www.scientific.net/DDF.143-147.25710.4028/www.scientific.net/DDF.143-147.257 ↗