journal article·2000-11

Application of superplasticity in commercial magnesium alloy for fabrication of structural components

T. Mukai, H. Watanabe, K. Higashi

Materials Science and Technology· Volume 16· Issue 11-12
Publisher page

Abstract

An investigation of the superplastic characteristics of magnesium alloys with several grain sizes revealed that grain boundary sliding took place more easily with grain refinement. The required grain size for high strain rate superplastic forming was estimated to be ∼2 µm. The required grain structure could be obtained by several procedures, hot extrusion with a high extrusion ratio, severe plastic deformation via equal channel angular extrusion, consolidation of machined chip, and/or powder metallurgy processing of rapidly solidified powders, on a laboratory scale. The processing route of hot extrusion was selected in this study. An experimental study of superplastic press forming was conducted for a commercially extruded ZK60 alloy. The fabricated product did not essentially contain macroscopic defects, i.e. cracks or cavities. From an examination of tensile characteristics, it was found that the post-formed alloy exhibited higher strength and higher ductility compared with some conventional cast magnesium alloys, aluminium alloys, and steels. The experimental results support the possibility of using superplastically formed magnesium to produce structural components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. ASM Speciality Handbook, ‘Magnesium and magnesium alloys’; 1999, Materials Park, OH, ASM International.
2. G. SCHINDELBACHER and R. BOSCH: in ‘Magnesium alloys and their applications’, (ed. B. L. Mordike and K. U. Kainer), 247; 1998, Frankfurt, Werkstoff-Informationsgesellschaft.
3. 10.1179/mst.1997.13.10.82510.1179/mst.1997.13.10.825 ↗
4. 10.1179/mst.1998.14.1.3210.1179/mst.1998.14.1.32 ↗
5. 10.1016/S1359-6462(99)00155-410.1016/S1359-6462(99)00155-4 ↗
6. 10.2464/jilm.49.40110.2464/jilm.49.401 ↗
7. 10.1016/0956-7151(94)00323-A10.1016/0956-7151(94)00323-A ↗
8. 10.2320/matertrans1989.36.124910.2320/matertrans1989.36.1249 ↗
9. 10.2464/jilm.42.34510.2464/jilm.42.345 ↗
10. 10.1557/JMR.1996.034610.1557/JMR.1996.0346 ↗
11. KAIBYSIIEV R. O. · Phys. Met. Metallogr · 1994 · 78 · 209
12. 10.1007/BF0322299110.1007/BF03222991 ↗
13. 10.1007/BF0322298810.1007/BF03222988 ↗
14. WILSON D. V. · J. Inst. Met · 1970 · 98 · 133