Fracture toughness of two experimental high-strength bainitic low-alloy steels containing silicon
Source abstract
Abstract
The fracture toughness of two experimental silicon-containing steels in the bainitic condition has been measured and related to the microstructural state of the steels. The optimum bainitic microstructure for high strength and high toughness combinations consists of bainitic ferrite and thin interwoven laths of retained austenite instead of cementite, this condition being achieved through the silicon addition to the steels. The thin films of retained austenite are thermally and mechanically stable and act to reduce the effective fracture grain size and also possibly help to blunt propagating microcracks; blockier volumes of retained austenite are unstable and hence not beneficial to toughness. The two experimental steels achieved strength and toughness values equal to, or better than, some commercial steels in the martensitic condition.MST/528
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. MATAS S. J. · Trans. AIME · 1961 · 221 · 179
2. R. F. HEHEMANN: in ‘Phase transformations’, 397; 1970, Metals Park, Ohio, American Society for Metals.
3. 10.1007/BF0265830910.1007/BF02658309 ↗
4. SANDVIK B. P. J. · Metall. Trans., 1982, 13A, 777
5. 10.1179/03071698180327599210.1179/030716981803275992 ↗
6. 10.1179/03063458379042060010.1179/030634583790420600 ↗
7. 10.1179/03063458379042064610.1179/030634583790420646 ↗
8. V. T. T. MIIHKINEN and D. v. EDMONDS: ‘Advances in fracture research’, Vol. 2, 1481; 1984, Oxford, Pergamon Press.10.1016/B978-1-4832-8440-8.50138-1 ↗
9. MARSCHALL C. W. · Trans ASM · 1962 · 55 · 135
10. WEBSTER D. · Trans. ASM · 1968 · 61 · 816
11. HAYDEN H. W. · Trans. ASM · 1968 · 61 · 474
12. FLOREEN S. · Trans. ASM · 1968 · 61 · 489
13. 10.1016/0013-7944(73)90013-110.1016/0013-7944(73)90013-1 ↗
14. W. W. GERBERICH, P. L. HEMMINGS, V. F. ZACKAY and E. R. PARKER: in ‘Fracture’, (ed. P. L. Pratt), 288; 1969, London, Chapman and Hall.
15. 10.1007/BF0291754210.1007/BF02917542 ↗
16. MIIHKINEN V. T. T. · Mater. Sci. Technol., this issue, 422
17. MIIHKINEN V. T. T. · Mater. Sci. Technol., this issue, 432
18. J. P. BENSON: PhD Thesis, University of Cambridge, 1976.
19. 10.1179/03071697580327716810.1179/030716975803277168 ↗
20. F. B. PICKERING: ‘Physical metallurgy and the design of Steels’; 1978, London, Applied Science.
21. KALISH D. · J. Mater., · 1970 · 5 · 169
22. IRVINE K. J. · J. Iron Steel Inst., · 1963 · 201 · 518
23. BHADESHIA H. K. D. H. · Met. Sci., · 1979 · 13 · 325
24. LIU Y. H. · Trans. ASM · 1969 · 62 · 55
25. LIU Y. H. · Trans. ASM · 1969 · 62 · 544
26. 10.1016/0025-5416(78)90149-010.1016/0025-5416(78)90149-0 ↗
27. 10.1007/BF0265348810.1007/BF02653488 ↗
28. NAYLOR J. P. · Metall. Trans., 1974, SA, 1699.
29. G. THOMAS and M. SARIKAYA: in ‘Solid—solid phase trans-formations’, (ed. H. I. Aaronson et al.), 999; 1983, New York, American Institute of Mining and Metallurgical Engineers.
30. 10.1007/BF0265640010.1007/BF02656400 ↗
31. 10.1007/BF0266194610.1007/BF02661946 ↗
32. 10.1007/BF0264443510.1007/BF02644435 ↗
33. V. T. T. MIIHKINEN: PhD Dissertation, University of Oxford, 1983.
34. BRESSANELLI J. P. · Trans. ASM · 1966 · 59 · 223
35. 10.1007/BF0265220810.1007/BF02652208 ↗
36. 10.1007/BF0281327110.1007/BF02813271 ↗