Interpretation of creep behaviour of a 9Cr–Mo–Nb–V–N (T91) steel using threshold stress concept
Source abstract
Abstract
The creep behaviour and the microstructural evolution of a 9Cr–Mo–Nb–V (T91) steel were extensively evaluated by means of short term constant load creep tests and TEM analysis. Statistical analysis of the microstructural data revealed that the precipitated phases M23 C6 (where M is a metal, mainly Cr or Fe) and MX (where M is Nb or V, and X is C and/or N) were subject to coarsening during creep exposure. The coarsening law and its dependence on applied stress were identified, and the model was used to predict the magnitude of the Orowan stress at the time corresponding to the minimum creep rate. The minimum creep rate dependence on applied stress at 873 K was described by incorporating the threshold stress concept in a power law with stress exponent n = 5. In the resulting phenomenological model, the strengthening effect of the dispersed phases was thus expressed by a threshold stress proportional to the Orowan stress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. L. KLoc and V. SKLENICKA: in ‘Creep resistant metallic materials’, 442; 1996, Ostrava, Vitkovice as.
2. V. FOLDYNA, Z. KUBOK, A. JAKOBOVA, and V. VODAREK: in ‘Creep resistant metallic materials’, 203; 1996, Ostrava, Vitkovice as.
3. A. JAKOBOVA, V. FOLDYNA, and V. VODAREK: in ‘Creep resistant metallic materials’, 306; 1996, Ostrava, Vitkovice as.
4. J. BURSIK, A. ORLOVA, K. KUCHAAOVA, and V. SKLENICKA: in ‘Creep resistant metallic materials’, 234; 1996, Ostrava, Vitkovice as.
5. V. FOLDYNA, A. JAKOBOVA, A. GEMPERLE, and R. RIMAN: in ‘Creep and fracture of engineering materials and structures’, (ed. B. Wilshire and R. E. Evans), 507; 1990, London, The Institute of Metals.
6. S. MROWEC: ‘Defects and diffusion in solids’, 390–429; 1980, Amsterdam, Elsevier.
7. J. D. ROBSON and H. K. D. H. BHADESHIA: in ‘Creep resistant metallic materials’, 86; 1996, Ostrava, Vitkovice as.
8. 10.1016/0956-716X(91)90240-210.1016/0956-716X(91)90240-2 ↗
9. 10.1016/0956-716X(91)90301-G10.1016/0956-716X(91)90301-G ↗
10. 10.1007/BF0322281510.1007/BF03222815 ↗
11. WAGNER C. · Z. Elektrochem · 1961 · 65 · 581
12. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
13. 10.1007/BF0104575510.1007/BF01045755 ↗
14. 10.1016/0956-716X(93)90326-N10.1016/0956-716X(93)90326-N ↗
15. 10.1007/s11661-998-0224-910.1007/s11661-998-0224-9 ↗
16. L. M. BROWN and R. K. HAM: in ‘Strengthening methods in crystals’, (ed. A. Kelly and R. B. Nicholson), 10; 1971, London, Applied Science.
17. H. OIKAWA and T. G. LANGDON: in ‘Creep behaviour of crystalline solids’, (ed. R. Wilshire and R. W. Evans), 33; 1985, Swansea, Pineridge Press.
18. E. OROWAN: in ‘Dislocations in metals’, (ed. M. Cohen); 1954, New York, AIME.
19. 10.1016/0036-9748(82)90484-710.1016/0036-9748(82)90484-7 ↗
20. 10.1007/BF0264612010.1007/BF02646120 ↗
21. 10.1515/HTMP.1997.16.2.9710.1515/HTMP.1997.16.2.97 ↗