journal article·2002-04

Metallurgy and processing of ultralow carbon bake hardening steels

L. J. Baker, S. R. Daniel, J. D. Parker

Materials Science and Technology· Volume 18· Issue 4
Publisher page

Abstract

The development of bake hardening steels is reviewed. Classical strain aging theories still have relevance to modern ultralow carbon chemistries, although the drastically reduced carbon contents of these steels can influence the kinetics observed during bake hardening. High solute carbon levels increase the bake hardening response but reduce room temperature aging resistance, hence excess carbon levels are kept within the range 15 - 25 ppm. The strength increase appears to be enhanced by a fine ferrite grain size; the published evidence is contradictory and further research is considered necessary. Bake hardening steels can be produced from interstitial free chemistries either by adjusting the chemistry during steelmaking to leave carbon in solution, or by annealing at high temperature to take carbides formed during processing into solid solution. Care must be taken during coiling, annealing, and temper rolling to ensure that suitable amounts of carbon remain in solution to produce a bake hardening product. Further research into the influence of processing conditions on the metallurgy of these steels is required if they are to be successfully produced in industrial conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. N. E. HEATH: in ‘Galvanised steel sheet forum—automotive’, 1–5; 2000, London, IoM Communications.
2. F. E. GOODWIN, R. VENKATARAMAN, and T. C. SIMPSON: in ‘Galvanised steel sheet forum—automotive’, 47–56; 2000, London, IoM Communications.
3. W. B. HUTCHINSON, K.I. NILSSON, and J. HIRSCH: in ‘Metallurgy of vacuum degassed products’, 109 — 126; 1990, Warrendale, PA, TMS.
4. BAIRD J. D. · Iron Steel · 1963 · 36 · 186
5. BAIRD J. D. · Iron Steel · 1963 · 36 · 326
6. BAIRD J. D. · Iron Steel · 1963 · 36 · 368
7. BAIRD J. D. · Iron Steel · 1963 · 36 · 400
8. NACKEN M. · Arch. Eisenhiatenwes · 1960 · 31 · 103
9. 10.1016/0001-6160(59)90132-410.1016/0001-6160(59)90132-4 ↗
10. 10.1016/0001-6160(60)90138-310.1016/0001-6160(60)90138-3 ↗
11. 10.1016/0001-6160(60)90033-X10.1016/0001-6160(60)90033-X ↗
12. 10.1016/S0031-8914(39)90061-310.1016/S0031-8914(39)90061-3 ↗
13. ABE H. · Scand J. Metad · 1984 · 13 · 226
14. SANTANU K. R. · Metad Trans. A · 1991 · 22 · 3510.1007/BF03350947 ↗
15. LESLIE W. C. · Metall. Trans A · 1978 · 9 · 343 — 34910.1007/BF02646383 ↗
16. WELLS M. G. H. · Trans. ASM · 1966 · 59 · 427 — 438
17. RASHID M. S. · Metad Trans. AIME · 1949 · 7 · 498
18. W. C. LESLIE: ‘The physical metallurgy of steels’, 79; 1981, New York, McGraw-Hill.
19. 10.2355/isijinternational1966.24.1710.2355/isijinternational1966.24.17 ↗
20. KINOSHITA M. · Trans ISIJ · 1988 · 28 · B66
21. K. SAKATA, S. SATOH, T. KATO, and O. HASHIMOTO: in ‘Physical metallurgy of IF steels’, 279–288; 1994, Tokyo, Iron and Steel Institute of Japan.
22. R. PRADHAN: in ‘Metallurgy of vacuum degassed steel products’, 309–325; 1990, Warrendale, PA, TMS.
23. C.S. LEE and B. K. ZUIDEMA: in ‘High strength steels for the automotive industry’, 103–110; 1994, Warrendale, PA, ISS.
24. G. TITHER, C. I. GARCIA, M. HUA, and A. J. DEARDO: in ‘Physical metallurgy of IF steels’, 293; 1994, Tokyo, Iron and Steel Institute of Japan.
25. KOJIMA N. · Sumitomo Search · 1993 · 45 · 12
26. K. TSUNOYAMA, K. SAKATA, T. OBARA, S. SATOH, K. HASIGUSI, and T. nuE: in ‘Hot and cold rolled sheet steels’, 155–164; 1998, Warrendale, PA, TMS.
27. K. KAWASAKI, T. SENUMA, and S. SANAGI: in ‘Processing, microstructure and properties of micro alloyed and other modern HSLA steels’, 137–144; 1991, Warrendale, PA, ISS.
28. M. KINO, M. YAMADA, Y. TOKUNAGA, and T. TSUCHIYA: in ‘Metallurgy of vacuum degassed products’, 197–211; 1990, Warrendale, PA, TMS.
29. OKADA S. · Curr. Adv. Mater. Process · 1989 · 2 · 1726
30. T. HUE, S. SATOH, A. YASUDA, and O. HASHIMOTO: in ‘Metal-lurgy of continuously annealed sheet steel’, 155–171; 1982, Warrendale, PA, TMS.
31. K. TSUNOYAMA, S. SATOH, Y. YAMASAKI, and H. ABE: in ‘Metallurgy of vacuum degassed products’, 127–141; 1990, Warrendale, PA, TMS.
32. Y. TOKUNAGA and H. KATO: in ‘Metallurgy of vacuum degassed products’, 91–108; 1990, Warrendale, PA, TMS.
33. ENGL B. · ISS MWSP Conf. Proc · 1998 · 35 · 3
34. D. O. WILSHYNSKY, D. K. MATLOCK, and G. KRAUSS: in ‘Metallurgy of vacuum degassed products’, 247 — 261; 1990, Warrendale, PA, TMS.
35. SATOH S. · Tetsu-to-liagane (J. Iron Steel Inst. Jpn) · 1983 · 68 · 136210.2355/tetsutohagane1955.68.9_1362 ↗
36. LOW J. R. · Trans. AIME · 1944 · 158 · 207 — 249