Microscopic deformation behaviour of martensitic–ferritic dual-phase steels
Source abstract
Abstract
The deformation behaviour of the two phases of three plain carbon dual–phase steels after various treatments has been studied using a scanning electron microscope equipped with a tensile straining stage. The distribution of strains between the ferrite and martensite phases, as well as among the different grains of each phase, was observed to be inhomogeneous. The martensite/ferrite strain ratio, which defines the degree of uniformity of straining between the phases, depends on the microstructural parameters of the steels: it increases with increasing volume fraction of martensite, but decreases as the carbon content of the martensite increases. Tempering at various temperatures causes a decrease in the martensite/ferrite microhardness ratio and hence causes an increase in the strain ratio. The macroscopic strain of the specimen at which the martensite begins to deform was also found to be dependent on the microstructural parameters. Regions of applicability of the existing theories of the strength of dual–phase steels can be estimated according to the deformation condition of the martensite.MST/235
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. TAMURA I. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1973 · 59 · 45410.2355/tetsutohagane1955.59.3_454 ↗
2. 10.1007/BF0281763610.1007/BF02817636 ↗
3. 10.1007/BF0264639710.1007/BF02646397 ↗
4. 10.1007/BF0265992410.1007/BF02659924 ↗
5. 10.1179/03063458179042661510.1179/030634581790426615 ↗
6. G. K. SPEICH and R. L. MILLER: in ‘Structure and properties of dual-phase steels’, (ed. R. A. Kot and J. W. Morris), 145; 1979, Warrendale, Pa, The Metallurgical Society of AIME.
7. ARAKI K. · Trans. Iron Steel Inst. Jpn · 1977 · 17 · 71010.2355/isijinternational1966.17.710 ↗
8. 10.1016/0025-5416(76)90097-510.1016/0025-5416(76)90097-5 ↗
9. SZEWCZYK A. F. · Metall. Trans., · 1982 · 13 · 82110.1007/BF02647838 ↗
10. XU Y. P. · Acta Metall. Sin., · 1982 · 18 · 58
11. U. P. SIIEN and T. C. LEI: in ‘Advances in fracture research’, (ed. S. R. Valluri et al.), Vol. 2, 1271; 1984, Oxford, Pergamon Press.
12. SHEN H. P. · Acta Metall. Sin., · 1984 · 20 · A266
13. LEI T. C. · Acta Metall. Sin., · 1982 · 18 · 75
14. 10.1007/BF0265521010.1007/BF02655210 ↗
15. TOMOTA Y. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1975 · 61 · 10710.2355/tetsutohagane1955.61.1_107 ↗