Microstructure based creep constitutive model for precipitation strengthened alloys: Theory and application
Source abstract
Abstract
A kinetic creep equation for precipitation strengthened alloys has been derived using the climb/glide particle bypass micromechanism. It is applicable only when stresses lie within the range delineated by the dislocation network strength and the athermal yield strength — the lower of particle shear strength or Orowan strength. In this ‘dispersion controlled’ creep regime, strain rate is a hyperbolic sinh function of stress and interparticle spacing, making the state of dispersion an important microstructural feature. Existing equations have been used to quantify the evolution of dislocation and particulate microstructures and also stress redistribution between the two phases. The resulting constitutive equation set has been used to predict proof stresses, minimum creep rates and lifetimes for Nimonic 90. Comparison to industry data over a 600–900°C temperature range concludes that proof stresses are creep controlled once temperatures are above 700–725°C. Minimum creep rates and lifetimes over a similar temperature range are well predicted between 600 and 700°C but become progressively less accurate at higher temperatures/lower stresses, particularly lifetimes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Ashby M. F., and Dyson B. F.: in ‘Advances in fracture research’, (ed.Valluri S. et al), Vol. 1, 3-30; 1984, Oxford, Pergamon Press.10.1016/B978-1-4832-8440-8.50017-X ↗
2. Kachanov L. M. · Izr. Ak. Nauk SSSR Otdel Tekh Nauk · 1958 · 8 · 26
3. Rabotnov Y. N · Proc. XII IUTAM Cong., (ed.
4. Jason J. · J de Meeanique Appliquée · 1977 · 1 · 69
5. Ashby M. F., and Jones D. R. H. ‘Engineering materials’, 173; 1980, Oxford, Pergamon Press.
6. Anse11 G. S. · Trans AIME · 1959 · 215 · 838
7. Brown L. M., and Ham R. K.: in ‘Strengthening methods in crystals’, (ed. Kelly A., and Nicholson R. B.), 68; 1971, Amsterdam, Elsevier.
8. Kocks U. F., Argon A. S., and Ashby M. F. ‘Thermodynamics & kinetics of slip’, 93; 1975, New York, Pergamon Press.
9. Friedel J. ‘Dislocations’, 113; 1964, New York, Pergamon.10.1016/B978-0-08-013523-6.50011-9 ↗
10. Ion J. C., Barbosa A., Ashby M. F., Dyson B. F., and McLean M. ‘The modelling of creep for engineering design’, Report DMA A115, NPL, Teddington, UK, 1986.
11. 10.1016/0001-6160(83)90059-710.1016/0001-6160(83)90059-7 ↗
12. Heslop J., and Betteridge W. ‘The nimonic alloys’, 2nd edn; 1974, London, Edward Arnold.
13. Gibbons T. B., and Hopkins B. E. ‘The creep behaviour and structure of Ni—Cr base alloys’, Report DMA 253, NPL, UK, 1976.
14. Ashby M. F.: Proc. 2nd Bolton Landing Conf. on ‘Oxide dispersion strengthening’, 143; 1968, New York, Gordon and Breach Sci. Pub.
15. Harrison G. F. · Proc. Int. Conf. on ‘Engineering aspects of creep’, Sheffield, UK, September 1980, The Institute of Mechanical Engineers, · 69
16. 10.1179/msc.1970.4.1.12110.1179/msc.1970.4.1.121 ↗
17. 10.1016/0956-7151(92)90195-K10.1016/0956-7151(92)90195-K ↗