Development of rapid heating and cooling (flash processing) process to produce advanced high strength steel microstructures
Source abstract
Abstract
Flash processing of an AISI8620 steel sheet, which involves rapid heating and cooling with an overall process duration of <10 s, produced a steel microstructure with a high tensile strength and good ductility similar to that of advanced high strength steels. Flash processed steel [ultimate tensile strength (UTS): 1694 MPa, elongation: 7·1], showed at least 7 higher UTS and 30 greater elongation than published results on martensitic advanced high strength steel (UTS: 1585 MPa, elongation: 5·1). The underlying microstructure was characterised with optical, scanning electron, transmission electron microscopy as well as hardness mapping. A complex distribution of bainitic and martensite microstructures with carbides was observed. A mechanism for the above microstructure evolution is proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Industrial Systems and Welding Engineering, Ohio State University, Columbus, Ohio 43221, USA
SFP Works LLC, Washington, MI, USA
Materials Science and Engineering, Ohio State University, Columbus, Ohio 43221, USA
References (39)
Show source-provided references
1. ‘Body structure materials’, Technical transfer dispatch no. 6, ULSAB-AVC, May 2001
2. Porsche Engineering Services, Inc., ULSAB-AVC engineering report, October 2001
3. Kuziak R · Arch. Civil Mech. Eng. · 2008 · 8 · 102
4. 10.1016/j.msea.2006.02.13310.1016/j.msea.2006.02.133 ↗
5. 10.1179/02670830122500072510.1179/026708301225000725 ↗
6. 10.1179/02670830110150952010.1179/026708301101509520 ↗
7. Ohmura T, Tsuzaki K: ‘A new aspect of the strengthening factors f Fe-C martensite through characterization of nano-indentation-induced deformation behavior’, Proc. 1st Int. Symp. on ‘Steel science’, (ed. T. Furahara and K. Tsukzai), 35–46; 2007, Tokyo, The Iron and Steel Institute of Japan.
8. 10.1007/BF0258615710.1007/BF02586157 ↗
9. Kapustka N · Weld. J. Res. Suppl · 2008 · 87 · 135s
10. Cola GM: ‘Properties of bainite nucleated by water quenching in 80 ms’, Proc. 1st Int. Symp. on ‘Steel science’, (ed. T. Furahara and K. Tsukzai), 187–190; 2007, Tokyo, The Iron and Steel Institute of Japan.
11. Bhadeshia HKDH, Honeycombe R: ‘Steels: Microstructure and Properties’, 3rd edn; 2006, Oxford, Butterworth-Heinemann.10.1016/B978-075068084-4/50016-9 ↗
12. Alexandrov BT, Lippold JC: ‘Method and device for investigation of phase transformations in metals and alloys’, US patent no. 7473028, 6 January 2009.
13. 10.1007/BF0326660810.1007/BF03266608 ↗
14. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
15. 10.1016/0001-6160(81)90063-810.1016/0001-6160(81)90063-8 ↗
16. 10.1179/03063458279042721710.1179/030634582790427217 ↗
17. 10.1179/02670839079018960510.1179/026708390790189605 ↗
18. Materials Algorithm Project, available at: http://www.msm.cam.ac.uk/map/mapmain.html
19. http://calculations.ewi.org/VJP/MaterialsModeling.html
20. BISRA: ‘Atlas of isothermal transformation diagrams of B. S. EN steels’, Special report no. 56, 2nd edn, The Iron and Steel Institute, London, 1956.
21. Babu SS · Weld. J. Res. Suppl. · 1998 · 77 · 249s
22. Zrnik J · Metallugija · 2006 · 4 · 323
23. Narayanan B: Ohio State University, Columbus, OH, to be published.
24. 10.1016/j.actamat.2007.09.01810.1016/j.actamat.2007.09.018 ↗
25. 10.1007/BF0265159110.1007/BF02651591 ↗
26. Bhadeshia HKDH: ‘Bainite in Steels’, 2nd edn; 2001, London, Institute of Materials.
27. 10.1179/mst.1992.8.11.99410.1179/mst.1992.8.11.994 ↗
28. 10.1016/0921-5093(91)90660-F10.1016/0921-5093(91)90660-F ↗
29. Bhadeshia HKDH: ‘Worked Examples in the Geometry of Crystals’, 1st edn; 1987, London, Institute of Metals.
30. Furuhara T, Morito S, Maki T: ‘On the controlling factors of grain sizes in martensite and bainite’, Proc. 1st Int. Symp. on ‘Steel science’, (ed. T. Furahara and K. Tsukzai), 51–56; 2007, Tokyo, The Iron and Steel Institute of Japan.
31. 10.1179/13621710110153851410.1179/136217101101538514 ↗
32. Sugden AAB, Bhadeshia HKDH: ‘Microstructure entropy and the scatter in toughness’, Proc. 2nd Int. Conf. on ‘Trends in welding research’. Gatlinburg, TN, USA, May 1989, ASM International745–748.
33. 10.1007/BF0264649810.1007/BF02646498 ↗
34. 10.1179/mst.1996.12.6.45310.1179/mst.1996.12.6.453 ↗
35. 10.1179/02670839910150585110.1179/026708399101505851 ↗
36. 10.1016/S0921-5093(98)00800-410.1016/S0921-5093(98)00800-4 ↗
37. 10.1016/0921-5093(89)90068-310.1016/0921-5093(89)90068-3 ↗
38. 10.1179/174329307X25190710.1179/174329307X251907 ↗
39. Elmer JW · Weld. J. Res. Suppl. · 2004 · 83 · 244s