Quench factor analysis of aluminium alloys
Source abstract
Abstract
AbstractAbstractA model was developed almost 20 years ago which described how precipitation during the quench affected the development of properties of aluminium alloys during subsequent aging treatment. This model was the basis for an analytical process, known as quench factor analysis, that was used to predict the effects of quench path on corrosion characteristics and strength. The purpose of this paper is to provide a theoretical basis for the model and to review how quench factor analysis has been used in solving industrial problems. Several investigators have confirmed that quench factor analysis is an effective predictive method for all quenching conditions save one. The exception is when material has been quenched below the knee of the C-curve and subsequently reheated above the knee before the quench is complete. Applications include the design of quench systems, the development of quench practices which optimize combinations of high strength and low residual stress and distortion, and predictions of the magnitude of loss in strength as a result of unsuitable quenching conditions. By combining quench factor analysis with homogeneous nucleation theory, interactions between quenching and aging conditions have been clarified, and aging treatments have been developed which minimize the low and variable strengths caused by less than ideal quenching conditions. Quench factor analysis also adequately describes the rate of loss in toughness of an AA 6000 series extrusion alloy for those cooling conditions which produced commercially significant loss in strength. The latest use of quench factor analysis is in a specification for quenchants for aluminium alloys.MST/573
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. VRUGGINK J. E. · 1968
2. J. T. STALEY: ‘Prediction of corrosion of 2024-T4 from quench curves and the C-curve’. Report 13-69-HQ28, Alcoa Laboratories, Alcoa Center, Pa, 1969.
3. J. W. CHRISTIAN: ‘The theory of transformations in metals and alloys’, Part 1; 1975, Oxford, Pergamon Press.
4. PORTER D. A. · ‘Phase transformations in metals and alloys’: 1981, Van Nostrand Reinhold.
5. WILLEY L. A. · cited by H. Y. Hunsicker in ‘Aluminium’, Vol. 1, · 1967 · 140
6. EVANCHO J. W. · Metall. Trans., · 1974 · 5 · 4310.1007/BF02642924 ↗
7. FINK w. L. · Trans. AIME · 1948 · 175 · 414
8. R. McALEVY: MS Thesis, Pennsylvania State University, 1965.
9. ARCHAMBAULT P. · Proc. 16th Int. Conf. ‘Heat treatment '76’ · 105
10. S D. · Metall. Trans., · 1973 · 4 · 1149
11. FIORINI P. · Alluminio · 1972 · 41 · 544
12. 10.1007/BF0264309710.1007/BF02643097 ↗
13. HAUSER M. · Z. Metallkd., · 1964 · 55 · 816
14. R. COUCHMAN: ‘Press quenching of 6061-T6’, Report no. 7-70-HQ25, Alcoa Laboratories, Alcoa Center, Pa, 1970. 18, P. FURNEY and It. COUCHMAN: US Patent 3,996,075, 1976.
15. FURNEY P. · US Patent 3,996,075, 1976
16. L. SWARTZENDRUBER, W. BOETTINGER, L. IVES, S. CORIELL, D. BALLARD, D. LAUGHLIN, R. CLOUGH, F. BIANCANIELLO, P. BLAU, J. CAHN, and R. MEHRABIAN: ‘Nondestructive evaluation of nonuniformities in 2219 aluminium alloyplate— relationship to processing’, Report NBSIR 80-2069, National Bureau of Standards, Washington, DC, 1980.
17. AXTER S. E. · Heat Treat., · 1981 · 46 · 0
18. HIRACKI N. · Keikinzoki · 1975 · 25 · 239
19. SANDERS R. E. · Aluminium, 1983, 53, 13-17, 143-149.
20. L. IVES, L. SWARTZENGRUBER, W. BOETTINGER, M. ROSEN, S. RIDDER, F. BIANCANIELLO, R. RENO, D. BALLARD, and R. MEHRABIAN: ‘Processing/microstructure/property relation-ships in 2024 aluminium alloy plates’, Report NBS 83-2669, National Bureau of Standards, Washington, DC, 1983.
21. 10.1007/BF0268059810.1007/BF02680598 ↗
22. SAWTELL R. R. · Aluminium · 1983 · 59 · 127
23. SAWTELL R. R. · Aluminium · 1984 · 60 · 198
24. KUHLMAN G. · 1982
25. STALEY J. T. · US Patent 4,431,467
26. 10.1007/BF0267228710.1007/BF02672287 ↗
27. G. E. SPANGLER, R. F. ASHTON, and D. S. THOMPSON: ‘Aluminum transformation technology and applications’; 1982, Metals Park, Ohio, American Society for Metals.
28. BRYANT A. J. · J. Inst. Met., · 1972 · 100 · 191
29. BOMAS H. · Maschinenmarkt · 1982 · 59 · 1220
30. DEVALAY R. · Rev. Alum., · 1980 · 137 · 9
31. THOMAS A. T. · Aluminium · 1973 · 49 · 667
32. BRYANT A. J. · J. Inst. Met., · 1972 · 100 · 40
33. KAUFMAN J. G. · Mater. Res. Stand., 1964, 4, 181-189
34. BATES C. E. · Heat Treat., · 1985 · 13 · 7