journal article·2010-03

Review of effect of P and Sr on modification and porosity development in Al–Si alloys

J. Campbell, M. Tiryakioğlu

Materials Science and Technology· Volume 26· Issue 3
Publisher page

Abstract

The benefits of Sr additions to Al–Si alloys to modify the eutectic are often impaired by the development of porosity, sometimes to the degree that benefits are negated. Experimental reports are reviewed in this paper, suggesting an explanation in terms of the oxide population in the melt. The unmodified silicon particles are nucleated by AlP, which has in turn nucleated on oxide bifilms. The oxide bifilms, which are essentially cracks, are straightened by the crystalline growth of Si particles, leading to increased crack size and consequently reduced mechanical properties. The addition of Sr improves properties by suppressing the formation of Si on bifilms and thereby preventing the straightening of the pre-existing cracks. Si is now forced to precipitate at a lower temperature as a coral-like eutectic. Unfortunately, the bifilms are now freed (the primary Si particles no longer exist to grow around and sequester the bifilms), remaining in suspension in the liquid metal, allowing them to act to block interdendritic flow and aid the initiation of the formation of pores, countering the benefits of the improved structure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgy and MaterialsUniversity of Birmingham, Edgbaston B15 2TT, UK

Department of EngineeringRobert Morris University, Moon Township, PA 15108, USA

References (56)

Show source-provided references
1. Harris R. C., Lipson S., and Rosenthal H.: AFS Trans. 1956, 64, 470–481.
2. Shivkumar S. · AFS Trans · 1989 · 97 · 791
3. Gruzleski J. E., and Closset B. M. ‘The treatment of liquid aluminium—silicon alloys’; 1990, Schaumburg, IL, American Foundrymen's Society.
4. Drouzy M. · Cast Met · 1980 · 1 · 43
5. 10.1080/13640461.2002.1181944910.1080/13640461.2002.11819449 ↗
6. Hetke A., and Grundlach R. B.: AFS Trans. 1994, 102, 367–380.
7. Brosnan M., and Shivkumar S.: AFS Trans. 1995, 103, 727–737.
8. Irani D.: personal communication, Hitchcock Industries, Minneapolis, MN, USA.
9. Fuoco R., Correa E. R., and Goldstein H.: AFS Trans. 1996, 104, 1151–1155.
10. Campbell J. · AFS Int. J. Metaleast · 2009 · 3 · 77
11. 10.1007/s11661-008-9580-810.1007/s11661-008-9580-8 ↗
12. Jorstad J. · AFS Int. J. Metaleast · 2009 · 3 · 75
13. Pennors A. · Trans. AFS · 1998 · 106 · 251
14. Campbell J. · AFS Int. J. Metaleast · 2009 · 3 · 65
15. Campbell J.: in ‘Shape Casting: 3rd International Symposium’, (ed.Campbell J.); 2009, Warrendale, PA, TMS, pp. 3–10.
16. 10.1007/s11661-009-9804-610.1007/s11661-009-9804-6 ↗
17. Cho J.I., and Loper C. R.: AFS Trans. 2000, 108, 359–367.
18. 10.1179/09506600222500655710.1179/095066002225006557 ↗
19. Viswanathan S., Duncan A. J., Sabau A. S., Han Q., Porter W. D., and Riemer B. W.: AFS Trans. 1998, 106, 411–417.
20. Fuoco R., Correa E. R., and Correa A. V. O.: AFS Trans. 1995, 103, 379–387.
21. Fuoco R., Correa E. R., and de M., Bastos A.: AFS Trans. 1998, 106, 401–409.
22. Prakash S. V. S., Shankar S, and Kramer M.: in ‘General abstracts: light metals division’, (ed. Neelameggham N., and Kvitthyld A.), 33-41; 2007, Warrendale, PA, TMS.
23. 10.1007/BF0264392310.1007/BF02643923 ↗
24. Bainbridge I. F. · Mater. Forum · 2004 · 28 · 1297
25. Campbell J. · Set Teehnot · 2006 · 22 · 999
26. Campbell J. ‘Castings’, 2nd edn, 17-31; 2003, Amsterdam, Elsevier.10.1016/B978-075064790-8/50019-X ↗
27. Dennis K. · Alum. Trans · 2000 · 3 · 31
28. DeYoung D. H., and Dunlay M. J.: US patent 6,334,978, 2002.
29. Campbell J. ‘Castings’, 2nd edn, 5; 2003, Amsterdam, Elsevier.
30. Campbell J. ‘Castings’, 2nd edn, 112, 158-160; 2003, Amsterdam, Elsevier.
31. 10.1080/09534962.1988.1181896610.1080/09534962.1988.11818966 ↗
32. Campbell J. ‘Castings’, 2nd edn, 217; 2003, Amsterdam, Elsevier.
33. Emadi D., Gruzleski J. E., and Pekguleryuz M.: AFS Trans. 1996, 104, 763–768.
34. Iwahori H. · AFS Trans · 1990 · 98 · 167
35. Miresmaeidi M.: unpublished work, Department of Metallurgy and Materials Science, University of Birmingham, UK, 2004.
36. DeYoung D. H., and Weirauch D. A.: in ‘Light metals’, (ed.Tabereawc A. T.), 699-710; 2004, Pennsylvania, PA, TMS.
37. Shankar S., Riddle Y., and Makhlouf M. M.: in ‘Shape casting: The John Campbell symposium’, (ed.Tiryakioglu M., and Crepeau P. N.), 145-154; 2005, Pennsylvania, PA, TMS.
38. Groteke D. E.: AFS Trans. 1985, 93, 953–960.
39. 10.1016/j.msea.2005.08.17510.1016/j.msea.2005.08.175 ↗
40. Liu L., Samuel A. M., Samuel F. H., Doty H. W., and Valtierra S.: AFS Trans. 2002, 110, 449–462.
41. Argo D., and Gruzleski J. E.: AFS Trans. 1988, 96, 65–74.
42. Arbenz H. · Giesserei · 1962 · 49 · 105
43. Campbell J. ‘Castings’, 2nd edn, 218-222; 2003, Amsterdam, Elsevier.
44. Campbell J. ‘Castings’, 2nd edn, 169-170; 2003, Amsterdam, Elsevier.
45. 10.1080/13640461.2001.1181942210.1080/13640461.2001.11819422 ↗
46. 10.1007/s11661-001-0352-y10.1007/s11661-001-0352-y ↗
47. McDonald S. D., Lu L., Nogita K., and Dahle A. K.: in: ‘Shape casting: The JC symposium, (ed.Tiryakioglu M., and Crepeau P. N.), 125-133; 2005, Pennsylvania, PA, TMS.
48. Hunt J. D.: personal communication, Oxford University, Oxford, UK.
49. 10.1080/13640461.2000.1181940110.1080/13640461.2000.11819401 ↗
50. Wang R.Y., Lu W.H., and Ma Z.Y.: TAFS, 2007, 115, Paper 07-124(02), p. 8.10.3901/CJME.2007.02.115 ↗
51. Jian X., Xu C., Meek T., and Han Q.: AFS Trans. 2005, 113, 131–138.
52. Sokolowski J.: unpublished work, University of Windsor, Canada, 2000.
53. 10.1080/13640461.2003.1181961610.1080/13640461.2003.11819616 ↗
54. Caceres C. H.: Proc. 9th Int. Conf. Al Alloys, (ed. J. F. Nie et al), 1216-1221; 2004, Brisbane, Inst Mater Eng Australia Ltd.
55. Cho Y. H. · Trans A · 2008 · 39 · 2435
56. 10.1179/136404607X18650910.1179/136404607X186509 ↗