journal article·2006-01

Influence of pin geometry on material flow in friction stir welding process

Y.-H. Zhao, S.-B. Lin, F.-X. Qu, L. Wu

Materials Science and Technology· Volume 22· Issue 1
Publisher page

Abstract

The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique (MIT). Results of the flow visualisation show that the material flow is asymmetrical during the friction stir welding (FSW) process and there are also significant differences in the flow patterns observed on advancing and retreating sides. Combining the data from all the markers, a three-dimensional (3D) flow visualisation similar to the 3D image reconstruction technique was obtained. The 3D plot gives the tendency chart of material flow in FSW process and from the plot it can be seen that there is a vertical and circular motion around the longitudinal axis of the weld. The influence of the pin geometry on material flow in FSW was studied. When the column and taper pin are used, there is a ‘hole’ defect in the vertical mixing plot. When the taper with screw thread pin is used, the vertical material flow is more obvious and there is no distinct ‘hole’. Viewing from the advancing side, the pin geometry will affect the position where minimal transport distance against the welding direction occurs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Jones M. J., Heurtier P., Desrayaud C., Montheillet F., Allehaux D., and Driver J. H.: Scr. Mater., 2005, 52,693–697.10.1016/j.scriptamat.2004.12.027 ↗
2. Chen C. M. · Int. J. Mach. Tools Manuf · 2004 · 44
3. 10.1016/S0921-5093(02)00750-510.1016/S0921-5093(02)00750-5 ↗
4. 10.1016/S1359-6462(99)00062-710.1016/S1359-6462(99)00062-7 ↗
5. 10.1007/s11665-002-0008-010.1007/s11665-002-0008-0 ↗
6. Larsson H., Karlsson L., Stoltz S., and Bergqvist E. L.: Proc. 2nd Int. Symp. on ‘Friction stir welding’, Gothenburg, Sweden, June 2000.
7. 10.1016/S1044-5803(02)00362-510.1016/S1044-5803(02)00362-5 ↗
8. Shinoda T.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001.
9. Colligan K.: Weld. 1, 1999,78,229–237.10.1016/S0378-1119(99)00084-0 ↗
10. 10.1007/s11661-001-1038-110.1007/s11661-001-1038-1 ↗
11. Reynolds A. P., Seidel T. U., and Simonsen M.: Proc. 1st Int. Symp. on ‘Friction stir welding’, Thousand Oaks, CA, USA, June 1999.
12. London B., Mahoney M., Bingel W., Calabrese M., and Waldron D.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001.
13. London B., Mahoney M., Bingel W., and Calabrese M.: 3-12; 2003, Warrendale, PA, USA, TMS.
14. Schneider J. A., and Nunes A. C.Jr: ‘Thermo-mechanical pro-cessing in friction stir welds’, 43-54; 2003, Warrendale, PA, USA, TMS.
15. Colegrove P., Shercliff R. H., and Threadgill P.: Proc. 4th Int. Symp. on ‘Friction stir welding’, Park City, UT, USA, May 2003.
16. Colegrove P., Painter M., Graham D., and Miller T.: Proc. 2nd Int. Symp. on ‘Friction stir welding’, Gothenburg Sweden, June 2000.
17. Colegrove P., and Sherclliff H. ‘Thermo-mechanical processing in friction stir welds’, 13–23; 2003, Warrendale, PA, USA, TMS.
18. Hyoe T., Colegrove P., and Shercliff H.: 33-43; 2003, Warrendale, PA, USA, TMS.
19. 10.1016/j.matlet.2005.04.04810.1016/j.matlet.2005.04.048 ↗