Microstructure control and extrudability of Al–Mg–Si alloys microalloyed with manganese
Source abstract
Abstract
The hot deformation of AA 6063 and AA 6005 Al alloys has been related to chemical composition and the microstructural evolution occurring during the various heat treatment procedures before extrusion. It was shown that a small addition of Mn significantly accelerates the homogenising process (transformation of the brittle platelike β-AlFeSi phase to the more rounded α-AlFeSi phase) which results in superior hot formability and ductility. The mechanical behaviour of Al–Mg–Si alloys during hot deformation can be explained in terms of a model of dislocations climbing around particles. Large β phase particles increase initial work hardening rate and flow stress and impair hot ductility. The hot ductility of the material investigated via tensile testing was found to correlate with the density of particles covering grain boundaries. It was also shown that grain refinement in the billet leads to more uniform distribution of intermetallic constituents, which accelerates the homogenising process and improves the hot ductility. Full scale extrusion trials show that the results from hot formability tests in the laboratory correlate closely with the relative extrudability of the investigated alloys.MST/1877
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. P. N. KALU and F.J. HUMPHREYS: in Proc. Conf. 'Aluminium technology '86', 197–203; 1986, London, The Institute of Metals.
2. E. C. BEATTY: in Proc. 2nd Int. Aluminium Extrusion Technology Seminar, Vol. 1, 225–228; 1977, Washington, DC, Aluminum Association.
3. L. F. MONDOLFO: in 'Aluminium alloys: structure and properties', 787 797; 1976, London, Butterworths.10.1016/B978-0-408-70932-3.50008-5 ↗
4. LAMB H. J. · 1979 · 3
5. H. W. L. PHILLIPS: 'Annotated equilibrium diagrams of some aluminium alloy systems', Monograph and Report Series No. 25; 1959, London, The Institute of Metals.
6. C. J. HEATHCOCK, J. D. COOKE, and S. A. NUGENT: in Proc. 4th Int. Aluminium Extrusion Technology Seminar, Vol. 1, 85–89; 1988, Washington, DC, Aluminum Association.
7. BICHSEL H. · Aluminium · 1981 · 57 · 787
8. L.O%. GULLMAN, S. ZAJAC, and A. JOHANSSON: in Proc. 5th Int. Aluminium Extrusion Technology Seminar, Vol. 2, 71–77; 1992, Washington, DC, Aluminum Association.
9. S. ZAJAC, L.O. GULIMAN, and A. JOHANSSON: in Proc. 3rd Int. Conf. on 'Aluminium alloys', Vol. 2, 133–139; 1992, Trondheim, Norway, SINTEF.
10. 10.1016/0001-6160(87)90281-110.1016/0001-6160(87)90281-1 ↗
11. B. SUNDMAN, B. JANSSON, and J.O. ANDERSSON: in Proc. Int. Conf. on 'User applications of alloy phase diagrams'; 1987, Metals Park, OH, ASM.
12. P. KOLBY, M. SEIERSTEN, C. SIMENSEN, and J. TIBBALS: in Proc. 3rd Int. Conf. on 'Aluminium alloys', Vol. 2, 26–32; 1992, Trondheim, Norway, SINTEF.
13. L. M. BROWN: in Proc. 3rd Riso Int. Symp. on 'Fatigue and creep of composite materials', (ed. H. Lilholt, 1–18; 1982, Roskilde, Denmark, Riso National Laboratory.
14. 10.1016/0956-716X(93)90301-810.1016/0956-716X(93)90301-8 ↗
15. I. MUSULIN and O. C. CELLIERS: in 'Light metals 1990', (ed. Ch. M. Bickert), 951–954; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.