journal article·2018-11Open access

Recent progress in the high-cycle fatigue behaviour of γ -TiAl alloys

T.E.J. Edwards

Materials Science and Technology· Volume 34· Issue 16

Abstract

The high-cycle fatigue (HCF) properties of γ-TiAl (gamma titanium aluminide) alloys are reviewed, particularly with regards to the deformation mechanisms active in the near-threshold cyclic loading regime. By examining the influence of lamellar orientation and thickness on the HCF threshold, in addition to more conventional microstructural considerations such as the grain size or the volume fraction of lamellar colonies, factors to improve the γ-TiAl microstructure for HCF are assessed. Finally, experimental methods and loading strategies are surveyed to identify techniques for improving HCF testing of γ-TiAl alloys. In this, we consider both the conservativism of differing approaches and the possibility to measure with suitable resolution the local mechanical behaviour under HCF of the lamellar γ-TiAl microstructure. This review was submitted as part of the 2018 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK

Funding

Engineering and Physical Sciences Research Council · Rolls-Royce

References (100+)

Show source-provided references
1. 10.1080/09603409.2016.118306810.1080/09603409.2016.1183068 ↗
2. Goold I. Rolls-Royce advances toward ultrafan. Report, 2014.
3. Tetsui T · Tech Rev · 2002 · 39 · 1
4. 10.1007/s11837-012-0471-510.1007/s11837-012-0471-5 ↗
5. 10.1080/09603409.2016.118442310.1080/09603409.2016.1184423 ↗
6. Smarsly W, Esslinger J, Clemens H 2016 Status of titanium aluminide for aero engine applications. In: IWTA'16, 2016, Tokyo, Japan.
7. 10.1007/s11837-018-2747-x10.1007/s11837-018-2747-x ↗
8. 10.1016/j.intermet.2004.09.00710.1016/j.intermet.2004.09.007 ↗
9. 10.1002/978352763620410.1002/9783527636204 ↗
10. 10.1017/CBO978051180657510.1017/CBO9780511806575 ↗
11. Standard test method for measurement of fatigue crack growth rates. Standard, ASTM International, West Conshohocken, PA, 2015.
12. 10.1115/1.365690010.1115/1.3656900 ↗
13. Kruzic JJ, Campbell JP, McKelvey AL In: Kim Y-W, Dimiduk DM, Loretto MH, editors. Gamma titanium aluminides 1999. TMS; 1999, San Diego.
14. 10.2109/jcersj.99.104710.2109/jcersj.99.1047 ↗
15. 10.1016/0266-3538(87)90076-510.1016/0266-3538(87)90076-5 ↗
16. 10.1016/S0020-7683(99)00096-710.1016/S0020-7683(99)00096-7 ↗
17. 10.1520/JAI10429310.1520/JAI104293 ↗
18. 10.1016/j.intermet.2014.10.00510.1016/j.intermet.2014.10.005 ↗
19. 10.1016/S0013-7944(99)00051-X10.1016/S0013-7944(99)00051-X ↗
20. 10.1007/s11223-014-9563-510.1007/s11223-014-9563-5 ↗
21. 10.1016/0921-5093(95)80019-010.1016/0921-5093(95)80019-0 ↗
22. 10.1038/nmat467710.1038/nmat4677 ↗
23. 10.1016/S1359-6462(03)00482-210.1016/S1359-6462(03)00482-2 ↗
24. Zuo YR · Adv Mat Res · 2014 · 881 · 1330
25. Andersson LE, Larsson M. Device and arrangement for producing a three-dimensional object. EP Patent 1,296,788. 2005.
26. 10.1016/j.intermet.2010.11.01710.1016/j.intermet.2010.11.017 ↗
27. Larsen JM, Rosenberger AH, Worth BD, et al. Assuring reliability of gamma titanium aluminides in long-term service. Minerals, metals and materials society/AIME, gamma titanium aluminides 1999 (USA). 1999. p. 463–472.
28. 10.1016/j.intermet.2011.10.00510.1016/j.intermet.2011.10.005 ↗
29. 10.1016/j.ijfatigue.2007.03.01810.1016/j.ijfatigue.2007.03.018 ↗
30. Bathias C. · 2013
31. Xue H · J Mech Strength · 2008 · 30 · 112
32. 10.1016/j.ijfatigue.2004.05.00210.1016/j.ijfatigue.2004.05.002 ↗
33. 10.1520/STP26680S10.1520/STP26680S ↗
34. Halford GR. · 2006
35. 10.1520/STP49638S10.1520/STP49638S ↗
36. 10.1016/1359-6462(95)00679-610.1016/1359-6462(95)00679-6 ↗
37. 10.1007/s11661-997-1010-910.1007/s11661-997-1010-9 ↗
38. 10.1016/0921-5093(91)90679-H10.1016/0921-5093(91)90679-H ↗
39. 10.1016/S1359-6462(97)00338-210.1016/S1359-6462(97)00338-2 ↗
40. 10.1016/S1359-6462(97)00154-110.1016/S1359-6462(97)00154-1 ↗
41. 10.1016/S1359-6454(98)00409-110.1016/S1359-6454(98)00409-1 ↗
42. 10.1007/s11661-997-0084-810.1007/s11661-997-0084-8 ↗
43. 10.1111/ffe.1235610.1111/ffe.12356 ↗
44. Wessel W. Mikrostrukturelle Untersuchungen der Rissinitiierung und -ausbreitung in intermetallischen TiAl-Legierungen unter zyklischer und quasistatischer Belastung [PhD thesis]. 2012.
45. 10.1111/ffe.1227510.1111/ffe.12275 ↗
46. 10.1111/ffe.1232310.1111/ffe.12323 ↗
47. Filippini M · 2014 · 189
48. 10.1007/BF0003334510.1007/BF00033345 ↗
49. 10.1007/s11661-998-0329-110.1007/s11661-998-0329-1 ↗
50. 10.1007/s11661-001-1026-510.1007/s11661-001-1026-5 ↗
51. Draper SL · 2001 · 295
52. 10.1016/S0022-5096(98)00023-410.1016/S0022-5096(98)00023-4 ↗
53. Draper SL, Lerch BA 2008 Durability assessment of TiAl alloys. In: Gamma titanium aluminides 2008. The Minerals, Metals and Materials Society, New Orleans, Louisana.
54. 10.1016/j.intermet.2010.11.01810.1016/j.intermet.2010.11.018 ↗
55. 10.4028/www.scientific.net/KEM.417-418.58510.4028/www.scientific.net/KEM.417-418.585 ↗
56. 10.4028/www.scientific.net/KEM.465.44710.4028/www.scientific.net/KEM.465.447 ↗
57. 10.1016/j.proeng.2014.06.28910.1016/j.proeng.2014.06.289 ↗
58. 10.4028/www.scientific.net/AMR.891-892.113110.4028/www.scientific.net/AMR.891-892.1131 ↗
59. 10.1016/j.ijfatigue.2013.10.00510.1016/j.ijfatigue.2013.10.005 ↗
60. 10.1016/j.matdes.2015.06.16010.1016/j.matdes.2015.06.160 ↗
61. Rosenberger AH · 1997 · 555
62. 10.1016/j.ijfatigue.2007.03.01410.1016/j.ijfatigue.2007.03.014 ↗
63. 10.1016/j.msea.2014.10.08310.1016/j.msea.2014.10.083 ↗
64. 10.1016/S1359-6454(01)00091-X10.1016/S1359-6454(01)00091-X ↗
65. 10.1016/S1359-6454(01)00092-110.1016/S1359-6454(01)00092-1 ↗
66. 10.1016/j.intermet.2004.03.01510.1016/j.intermet.2004.03.015 ↗
67. 10.1016/j.actamat.2004.11.02210.1016/j.actamat.2004.11.022 ↗
68. 10.1179/1432891715Z.000000000153010.1179/1432891715Z.0000000001530 ↗
69. Weibull W 1997 A statistical theory of strength of materials. Proceedings of the Royal Swedish Institute, Stockholm. Engineering Research No. 151; 1939.
70. 10.1016/0966-9795(96)00012-X10.1016/0966-9795(96)00012-X ↗
71. 10.1016/S1359-6454(98)00132-310.1016/S1359-6454(98)00132-3 ↗
72. 10.1080/0141861970821028410.1080/01418619708210284 ↗
73. 10.1016/j.intermet.2006.03.00510.1016/j.intermet.2006.03.005 ↗
74. 10.1016/j.actamat.2017.08.05510.1016/j.actamat.2017.08.055 ↗
75. 10.1016/S0921-5093(00)00903-510.1016/S0921-5093(00)00903-5 ↗
76. Cottrell AH. · Trans Metall Soc AIME · 1958 · 212 · 192
77. 10.1016/S1359-6462(01)01114-910.1016/S1359-6462(01)01114-9 ↗
78. 10.1016/j.intermet.2014.10.02010.1016/j.intermet.2014.10.020 ↗
79. 10.1016/j.intermet.2013.10.01110.1016/j.intermet.2013.10.011 ↗
80. 10.1016/j.proeng.2011.04.60510.1016/j.proeng.2011.04.605 ↗
81. 10.1016/j.intermet.2014.04.00510.1016/j.intermet.2014.04.005 ↗
82. 10.1007/s12598-015-0625-z10.1007/s12598-015-0625-z ↗
83. 10.1007/s11661-999-0048-210.1007/s11661-999-0048-2 ↗
84. 10.1007/BF0264240910.1007/BF02642409 ↗
85. Filippini M, Schloffer M, Crist E 2017 Panel discussion: microstructure-defects-life. In: GAT'17 at TMS 2017. 2017, San Diego, CA.
86. 10.1002/adem.20120023110.1002/adem.201200231 ↗
87. 10.1007/s11661-998-0157-310.1007/s11661-998-0157-3 ↗
88. 10.1016/0921-5093(94)03271-810.1016/0921-5093(94)03271-8 ↗
89. 10.1007/BF0280436210.1007/BF02804362 ↗
90. 10.1016/0921-5093(94)03222-X10.1016/0921-5093(94)03222-X ↗
91. 10.1016/S0966-9795(99)00128-410.1016/S0966-9795(99)00128-4 ↗
92. 10.1016/j.msea.2011.10.05510.1016/j.msea.2011.10.055 ↗
93. Lin D · 1995 · 323
94. 10.1016/0921-5093(94)03270-X10.1016/0921-5093(94)03270-X ↗
95. 10.2355/isijinternational.32.133910.2355/isijinternational.32.1339 ↗
96. 10.1016/j.intermet.2014.05.01510.1016/j.intermet.2014.05.015 ↗
97. 10.1016/j.msea.2015.03.09110.1016/j.msea.2015.03.091 ↗
98. 10.1016/0956-7151(92)90472-Q10.1016/0956-7151(92)90472-Q ↗
99. 10.1016/S1359-6454(01)00180-X10.1016/S1359-6454(01)00180-X ↗
100. 10.1016/j.scriptamat.2009.05.03810.1016/j.scriptamat.2009.05.038 ↗