journal article·2016-05

Effects of alloy 718 microstructure on hydrogen embrittlement susceptibility for oil and gas environments

B. Kagay, K. Findley, S. Coryell, A. B. Nissan

Materials Science and Technology· Volume 32· Issue 7
Publisher page

Abstract

The effects of alloy 718 microstructure on hydrogen embrittlement susceptibility and tensile fracture mode were assessed through slow strain rate tensile testing and fracture surface analysis. Alloy 718 was annealed and aged to produce microstructures with variations in grain size and amount of grain boundary precipitates. Furthermore, the different ageing conditions likely resulted in differences in volume fractions and sizes of γ′ and γ′′ precipitates. The extent of grain boundary precipitation had the strongest effect on hydrogen embrittlement susceptibility, while grain size did not have any significant effect. Hydrogen embrittlement susceptibility was also correlated with differences in strength level, which was primarily controlled by the γ′ and γ′′ precipitate populations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Colorado School of Mines, 1500 Illinois St, Golden, CO 80401, USA

Special Metals Corporation, 3200 Riverside Dr, Huntington, WV 25705, USA

Chevron Energy Technology Company (ETC), 100 Chevron Way, Richmond, CA 94802, USA

References (32)

Show source-provided references
1. Huizinga S. · 2003 · 1
2. Shademan S. · 2012 · 1
3. Cassagne T. · 2008 · 1
4. Nice P. I. · 2013 · 1
5. Piccolo E. · 2012 · 1
6. 10.5006/1.329032010.5006/1.3290320 ↗
7. Foroni L. · 2014 · 1
8. Huang W. · 2014 · 1
9. Nice P. · 2014 · 1
10. Pires F. · 2011 · 165
11. Rosa T. S., Ribeiro A. F., de Almeida L. H., and dos Santos D. S. ‘Effects of the microstructure on the hydrogen diffusivity in Ni-based superalloy 718’, Defect Diffus. Forum, 2010, 297–301, 733–738. doi: 10.4028/www.scientific.net/DDF.297-301.73310.4028/www.scientific.net/DDF.297-301.733 ↗
12. 10.1016/j.corsci.2004.06.00810.1016/j.corsci.2004.06.008 ↗
13. 10.1016/S1468-6996(02)00039-610.1016/S1468-6996(02)00039-6 ↗
14. 10.1016/S0921-5093(99)00167-710.1016/S0921-5093(99)00167-7 ↗
15. McCoy S. A. · 2015 · 1
16. Kernion S. J. · 2015 · 1
17. Oradei-Basile A. · 1991 · 32510.7449/1991/Superalloys_1991_325_335 ↗
18. Eiselstein H. ‘Metallurgy of a columbium-hardened nickel–chromium–iron alloy’, STP 369 advances in the technology of stainless steels and related alloys, ASTM International, 1965, 65–79.10.1520/STP43733S ↗
19. Boesch W. · 1968 · 579
20. Brooks J. W. · 1988 · 33
22. 10.31399/asm.tb.stg2.978162708267910.31399/asm.tb.stg2.9781627082679 ↗
23. 10.1016/S1006-706X(13)60117-X10.1016/S1006-706X(13)60117-X ↗
24. ‘Age-hardened nickel-based alloys for oil and gas drilling and production equipment’, 6ACRA, API, Washington, DC, USA, 2015.
25. Bhavsar R. B. · 2001 · 4710.7449/2001/Superalloys_2001_47_55 ↗
26. 10.1016/j.matchar.2006.04.02010.1016/j.matchar.2006.04.020 ↗
27. 10.1016/j.matchar.2004.07.00410.1016/j.matchar.2004.07.004 ↗
28. 1996
29. 2004
30. 10.1016/0956-7151(90)90250-K10.1016/0956-7151(90)90250-K ↗
31. Lillard J. · 1997 · 1
32. Dieter G. ‘Mechanical metallurgy’, 3rd edn, 212–220; 1986, New York, McGraw-Hill.