journal article·2019-05

Additive manufacturing of copper alloys: Influence of process parameters and alloying elements

Dario Tiberto, Ulrich E. Klotz, Franz Held, Gerhard Wolf

Materials Science and Technology· Volume 35· Issue 8
Publisher page

Abstract

Owing to the physical properties of copper and its alloys it is challenging to achieve good surface quality and low porosity by the widely used laser-based additive manufacturing processes. This paper deals with the role of alloy composition, powder size and process parameters in additive manufacturing with laser beam melting machine (with power up to 100 W). Test parts were produced in pure copper and CuNiSi(Cr) alloys. The porosity was investigated as a function of different process parameters and powder size ranges. The effects of the alloy physical properties (reflectivity, thermal conductivity, melting range and surface tension) are discussed. Moreover, the effect of thermal treatment on the properties of CuNiSi parts was assessed in conventional two-step heat treatments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fem - Forschungsinstitut Edelmetalle + Metallchemie Schwäbisch Gmünd, Germany

Fraunhofer-Institut für Umwelt-, Sicherheits-und Energietechnik UMSICHT, Institutsteil Sulzbach-Rosenberg, Sulzbach-Rosenberg, Germany

Funding

German Ministry for Economics · and Energy · AiF-IGF

References (24)

Show source-provided references
1. Tiberto D · Metall · 2017 · 71 · 452
2. Becker D. Selektives Laserschmelzen von Kupfer und Kupferlegierungen, first ed. Apprimus Verlag, RWTH Aachen, pp. 7–9., pp. 39, 2014.
3. 10.1007/s11837-017-2695-x10.1007/s11837-017-2695-x ↗
4. Colopi M, Caprio L, Demir AG, Selective laser melting of pure Cu with a 1 kW single mode fiber laser. Proceedings of the 10th CIRP Conference on Photonic Technologies, (2018).10.1016/j.procir.2018.08.030 ↗
5. Becker D, Wissenbach K. Additive manufacturing of copper components. https://www.ilt.fraunhofer.de/content/dam/ilt/en/documents/annual_reports/JB09/s83.pdf - 2017.
6. Guschlbauer R · Metall · 2017 · 71 · 459
7. 10.3390/ma1004033310.3390/ma10040333 ↗
8. Poltz I · Metall · 2016 · 70 · 438
9. Dold E · Metall · 2018 · 72 · 457
10. Heußen D, Bremen S. Green Light for new 3D printing process. https://www.ilt.fraunhofer.de/en/press/press-releases/press-release-2017/press-release-2017-08-30.html. Press Release from 2017-8-30.
11. Deutsches Kupferinstitut. https://www.kupferinstitut.de/de/werkstoffe/eigenschaften/niedriglegierte-kupferwerkstoffe.html - 08.01.2018.
12. 10.1016/S0254-0584(02)00451-010.1016/S0254-0584(02)00451-0 ↗
13. Mašek J, Koutný D, Popela R. Thermal conductivity of Cu7.2Ni1.8Si1Cr copper alloy produced via SLM and ability of thin-wall structure fabrication. Proceedings of the Research and Education in Aircraft Design (READ) conference (2018), pp. 26–35.10.13164/conf.read.2018.12 ↗
14. Klotz U, Tiberto D, Held F. Additive manufacturing of 18-karat yellow-gold alloys. Proceedings of the 30th Santa Fe Symposium, Albuquerque, New Mexico (2016), pp. 255-272.
15. 10.1007/s13404-017-0201-410.1007/s13404-017-0201-4 ↗
16. Kött S. personal communication, Pforzheim University, 2018.
17. 10.1016/j.jallcom.2007.01.17810.1016/j.jallcom.2007.01.178 ↗
18. Ricci E · High Temperatures-High Pressures · 2009 · 38 · 43
19. Bowyer WH. The effects of impurities on the properties of OFP copper specified for the copper Iron Canister. Swedish Nuclear Power Inspectorate (SKI) Report 99:44 (1999) SKI Project Number 99099- pp. 11.
20. Eustathopoulos N, Nicholas MG, Drevet B. Wettability at high temperatures, Volume 3, Pergamon, Oxford OX5 1GB, pp. 154, 1999.
21. Hamani MS · Asian Journal of Information Technology · 2007 · 6 · 68
22. 10.1007/s10853-009-4149-510.1007/s10853-009-4149-5 ↗
23. 10.1007/s10853-005-1935-610.1007/s10853-005-1935-6 ↗
24. 10.1016/j.jpcs.2011.11.03310.1016/j.jpcs.2011.11.033 ↗