Microstructure and materials characterisation of the novel Al–Cu–Y alloy
Source abstract
Abstract
The microstructure, hot cracking susceptibility, and mechanical properties of a novel Al–Cu–Y alloy were investigated. The Al–4.7Cu–1.6Y alloy demonstrated very good casting properties, hot cracking susceptibility that is similar to Al–Si–Mg alloys. Analysis of the solidification process showed that the primary Al solidification is followed by the eutectic reaction Liquid→ τ 1 (Al 8 Cu 4 Y)+Al and the peritectic reactions Liquid+ τ 6 (Al,Cu) 11 Y 3 )→Al+ τ 1 (Al 8 Cu 4 Y) (612°C) and Liquid+ η(AlCu)→ τ 1 (Al 8 Cu 4 Y)+ θ(Al 2 Cu) (595°C). The τ 1 (Al 8 Cu 4 Y) eutectic phase demonstrated high thermal stability during homogenisation treatment. The recrystallisation temperature was in the range 250–350°C after rolling with previous quenching at 540 and 590°C and without heat treatment. The recommended annealing mode for material in the as-rolled condition is 100°C for 1 h: YS = 273 MPa, UTS = 305 MPa and El. = 6.6%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NUST ‘MISiS’, Moscow, Russia
Funding
Russian Science Foundation
References (25)
Show source-provided references
1. Novikov · 1966
2. 10.1016/S0079-6425(03)00037-910.1016/S0079-6425(03)00037-9 ↗
3. Zolotorevsky VS · 2007
4. ASM HANDBOOK. Properties and selection: nonferrous alloys and Special-Purpose materials. V.2. The Materials Information Company; 2010.
5. 10.1179/1743133613Y.000000009610.1179/1743133613Y.0000000096 ↗
6. 10.1134/S0031918X1211015410.1134/S0031918X12110154 ↗
7. 10.4028/www.scientific.net/MSF.519-521.39510.4028/www.scientific.net/MSF.519-521.395 ↗
8. 10.1016/j.actamat.2007.06.00910.1016/j.actamat.2007.06.009 ↗
9. 10.1016/j.matchar.2013.09.00410.1016/j.matchar.2013.09.004 ↗
10. 10.1007/s11041-017-0050-z10.1007/s11041-017-0050-z ↗
11. 10.1134/S0031918X1705011810.1134/S0031918X17050118 ↗
12. 10.1016/j.matdes.2009.11.04410.1016/j.matdes.2009.11.044 ↗
13. 10.1016/S0925-8388(02)00873-310.1016/S0925-8388(02)00873-3 ↗
14. 10.1016/j.calphad.2011.09.00810.1016/j.calphad.2011.09.008 ↗
15. GOST 11069-2001. Primary aluminium. Grades. Minsk. 2001.
16. GOST 859-2001. Copper. Grades. Minsk. 2001.
17. TC 48-4-208-72. Yttrium. Technical conditions. 1973.
18. 10.1179/1743133615Y.000000002910.1179/1743133615Y.0000000029 ↗
19. Yunusov I · Russ Metall · 1988 · 4 · 204
20. GOST 1583-93. Casting aluminium alloys. Specifications, Publisher of Standards, Moscow, August, 2000.
21. Registration Record of Aluminum Association Alloy Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Casting and Ingot. The Aluminum Association, Inc. Revised, January, 1989.
22. Humphreys FJ · 1995
23. 10.1016/0036-9748(84)90381-810.1016/0036-9748(84)90381-8 ↗
24. 10.1016/S0036-9748(88)80180-710.1016/S0036-9748(88)80180-7 ↗
25. 10.1016/j.msea.2011.06.04210.1016/j.msea.2011.06.042 ↗