journal article·2018-03Open access

Electron beam melting of Inconel 718: Effects of processing and post-processing

Peeyush Nandwana, Michael Kirka, Alfred Okello, Ryan Dehoff

Materials Science and Technology· Volume 34· Issue 5

Abstract

This study reports the effect of process temperature on microstructure evolution of electron beam melted Inconel 718. Samples fabricated at 915°C had fine grain boundary δ (∼200 nm) along with coarse intragranular δ spanning through the length of the grains. On the other hand, samples fabricated at 990°C, only had grain boundary δ along with secondary carbides. During hot isostatic pressing, the distribution of carbides governs the grain growth vs. lack of it. The samples fabricated at 990°C having grain boundary carbides had no grain growth owing to the pinning effect of carbides. In contrast, the sample processed at 915°C had significant grain growth owing to dissolution of grain boundary δ phase and absence of grain boundary carbides.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Silicon and Solar Cell Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Manufacturing Demonstration Facility, Oak Ridge National Laboratory, Knoxville, TN, USA

Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA

Funding

US Department of Energy · Office of Energy Efficiency and Renewable Energy · Advanced Manufacturing Office · Battelle

References (33)

Show source-provided references
1. Wagner HJ, Hall AM. Physical metallurgy of alloy 718; 1965.10.21236/AD0466476 ↗
2. Lingenfelter A. Welding of inconel alloy 718: a historical overview. In superalloys 718 metallurgy and applications; 1989. p. 673–683. (TMS, 1989).10.7449/1989/Superalloys_1989_673_683 ↗
3. Li S, Zhuang J, Yang J. The effect of delta-phase on crack propagation under creep and fatigue conditions in alloy 718. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 545–555. (TMS, 1994).10.7449/1994/Superalloys_1994_545_555 ↗
4. Burke MG, Miller MK. Precipitation in alloy 718: a combined AEM and APFIM investigation. In Superalloys 718, 625 and various derivatives; 1991. p. 337–350. (TMS, 1991).10.7449/1991/Superalloys_1991_337_350 ↗
5. 10.1016/S0921-5093(03)00079-010.1016/S0921-5093(03)00079-0 ↗
6. Koul AK, Au P, Bellinger N. Development of a damage tolerant microstructure for Inconel 718 turbine disk material. In Superalloys 1988 (sixth international symposium); 1988. p. 3–12. (TMS, 1988).10.7449/1988/Superalloys_1988_3_12 ↗
7. Radavich JF. The physical metallurgy of cast and wrought alloy 718. In Superalloys 718 metallurgy and applications; 1989. p. 229–240. (TMS, 2004).10.7449/1989/Superalloys_1989_229_240 ↗
8. Desvallees Y, Bouzidi M, Bois F, Delta phase in INCONEL 718: mechanical properties and forging process requirements. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 281–291. (TMS, 1994).10.7449/1994/Superalloys_1994_281_291 ↗
9. 10.1007/978-1-4419-1120-910.1007/978-1-4419-1120-9 ↗
10. 10.1016/j.msea.2015.05.03510.1016/j.msea.2015.05.035 ↗
11. 10.1016/j.msea.2007.07.01210.1016/j.msea.2007.07.012 ↗
12. 10.1007/s11837-016-1812-610.1007/s11837-016-1812-6 ↗
13. Sames WJ · Int Mater Rev · 2016 · 6608 · 1
14. 10.1179/026708309X1257849181459110.1179/026708309X12578491814591 ↗
15. 10.1016/j.msea.2008.12.02410.1016/j.msea.2008.12.024 ↗
16. 10.1016/j.msea.2006.11.10110.1016/j.msea.2006.11.101 ↗
17. Diem MM · Heat Treating Progress · 2003 · 3 · 52
18. Diem MM. Development of a combined hot isostatic pressing and solution heat-treat process for the cost effective densification of critical aluminum castings; 2002.
19. 10.1016/j.jmatprotec.2005.05.00510.1016/j.jmatprotec.2005.05.005 ↗
20. 10.1557/jmr.2014.14010.1557/jmr.2014.140 ↗
21. 10.1515/HTMP.2005.24.4.23910.1515/HTMP.2005.24.4.239 ↗
22. 10.1007/BF0265030010.1007/BF02650300 ↗
23. Sundararaman M, Mukhopadhyay P, Banerjee S. Carbide precipitation in Nickel Base superalloys 718 and 625 and their effect on mechanical properties. In Superalloys 718, 625, 706 and various derivatives; 1997. p. 367–378. (TMS, 1997).10.7449/1997/Superalloys_1997_367_378 ↗
24. 10.1007/BF0264754910.1007/BF02647549 ↗
25. 10.1007/BF0264925910.1007/BF02649259 ↗
26. Sundararaman M, Banerjee S, Mori H. The stability of γ ″ and γ′ phases in alloy 718 under electron irradiation. In Superalloys 718, 625, 706 and various derivatives; 2001:19. p. 379–387. (TMS, 2001).10.7449/2001/Superalloys_2001_379_387 ↗
27. Sundararaman M, Mukhopadhyay P, Banerjee S. Precipitation and room temperature deformation behaviour of Inconel 718. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 419–440. (TMS, 1994).10.7449/1994/Superalloys_1994_419_440 ↗
28. Brooks JW, Bridges PJ. Metallurgical stability of Inconel alloy 718. In Superalloys 1988 (sixth international symposium); 1988. p. 33–42. (TMS, 1988).10.7449/1988/Superalloys_1988_33_42 ↗
29. Carlson RG, Radavich JF. Microstructural characterization of cast 718. In Superalloys 718 metallurgy and applications; 1989. p. 79–95. (TMS, 1989).10.7449/1989/Superalloys_1989_79_95 ↗
30. 10.1016/j.matchar.2004.07.00410.1016/j.matchar.2004.07.004 ↗
31. 10.1515/HTMP.1993.11.1-4.35110.1515/HTMP.1993.11.1-4.351 ↗
32. 10.1016/j.matchar.2006.04.02010.1016/j.matchar.2006.04.020 ↗
33. 10.7449/1991/Superalloys_1991_147_16010.7449/1991/Superalloys_1991_147_160 ↗