Oxide bifilms in aluminium alloy castings – a review
Source abstract
Abstract
Aluminium alloy castings are most widely used in automobile industry because of their light weight, better castability and improved properties. The liquid aluminium surface easily oxidises during melting, transferring and pouring operation which may entrain oxide films into the casting. Research work has shown that the entrainment of this surface film and formation of bifilms in castings appear to be the source of most of the casting defects leading to a significant reduction in the mechanical properties of aluminium alloy castings. In this paper, the phenomenon of formation of oxide bifilms in aluminium alloy castings, effect of these bifilms on casting properties and their assessment techniques are discussed. For enhancing the quality of casting, research should focus towards development of process techniques for healing of bifilms in liquid metal during solidification.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Materials Engineering and Processing · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Srinivasnagar, Mangalore 575025, India
References (56)
Show source-provided references
1. Lu L, Nogita K, McDonald SD, Dahle AK: JOM, 2004, 56, 52–58.10.1007/s11837-004-0254-8 ↗
2. BrownJR: ‘Foseco non-ferrous foundryman's handbook’, 11th edn; 1999, Oxford, Butterworth-Heinemann Ltd.
3. 10.1007/BF0273500610.1007/BF02735006 ↗
4. 10.1007/BF0273500710.1007/BF02735007 ↗
5. Campbell J: ‘Casting’, 1st edn; 1991, Oxford, Butterworth- Heinemann Ltd.
6. Cao X, Campbell J: Int. J. Cast. Met. Res. 2003, 15, 595–608.10.1080/13640461.2003.11819546 ↗
7. Bangyikhan K: ‘Effects of oxide film, Fe-rich phase, porosity and their interactions on tensile properties of cast Al-Si-Mg alloys’, PhD thesis, University of Birmingham, UK, 2005.
8. Dispinar D: ‘Determination of metal quality of aluminium and its alloys’, PhD thesis, University of Birmingham, UK, 2005.
9. Lynch D: JOM, 2009, 61, 41–48.10.1007/s11837-009-0166-8 ↗
10. Impey SA, Stephenson DJ, NichollsJR: Mater. Sci. Technol. 1998, 4, 1126–1132.10.1179/026708388790221313 ↗
11. Nyahumwa C · AFS · 1998 · 58 · 215
12. 10.1007/s11663-008-9142-x10.1007/s11663-008-9142-x ↗
13. Dai X, Yang X, Campbell J, Wood J: Mater. Sci. Eng. A. 2003, A354, 315–325.10.1016/S0921-5093(03)00021-2 ↗
14. 10.1007/s11661-001-0266-810.1007/s11661-001-0266-8 ↗
15. Jiang H, Bowen P, Knott JF: J. Mater. Sci. 1999, 34, 719– 725.10.1023/A:1004560510632 ↗
16. Emamy M, Keyvani A, Mahta M, Campbell J: J. Mater. Sci.Technol. 2009, 25, 95–101.
17. Jolly M: JOM, 2005, 57, 19–28.10.1007/s11837-005-0091-4 ↗
18. Yang X, Huang X, Dai X, Campbell J, Tatler J: Int. J. Cast.Met. Res. 2004, 17, 321–331.10.1179/136404604225022748 ↗
19. Campbell J: ‘Casting’, 2nd edn; 2003, Oxford, Butterworth- Heinemann Ltd.
20. Dispinar D, Campbell J: J. Mater. Process. Technol. 2007, 182, 405–410.10.1016/j.jmatprotec.2006.08.021 ↗
21. Dispinar D, Campbell J: J. Inst. Cast. Met. Eng. 2007, 178, 78–86.
22. Liu L, Samuel FH: J. Mater. Sci. 1998, 33, 2269–2281.10.1023/A:1004331219406 ↗
23. Pavlak L: Metalurgija, 2008, 14, 31–39.10.1111/j.1365-2516.2007.01607.x ↗
24. Divandari M, Campbell J: Int. J. Cast. Met. Res. 2004, 17, 182–187.10.1179/136404604225017546 ↗
25. 10.1007/s11661-004-0237-y10.1007/s11661-004-0237-y ↗
26. Jolly MR, Reilly C, Green NR: TMS Annual Meeting & Exhibition, Washington, USA, Feb2010, TMS.
27. Pita CM, Felicelli SD: Comput. Struct. 2010, 88, 255–262.10.1016/j.compstruc.2009.11.004 ↗
28. Campbell J: Mater. Sci. Technol. 2006, 22, 127–145.10.1179/174328406X74248 ↗
29. Campbell J: Proc. 68th WFC, Chennai, India, February2008.
30. 10.1007/BF0273501010.1007/BF02735010 ↗
31. 10.1007/s10853-007-2095-710.1007/s10853-007-2095-7 ↗
32. 10.1007/s11661-010-0364-610.1007/s11661-010-0364-6 ↗
33. 10.1007/s11661-003-0253-310.1007/s11661-003-0253-3 ↗
34. Campbell J · Metall. Mater. Trans. A · 2009 · 41 · 1810.1007/s11661-009-0095-8 ↗
35. 10.1007/s11661-009-9872-710.1007/s11661-009-9872-7 ↗
36. 10.1007/BF0273500810.1007/BF02735008 ↗
37. Liu L, Samuel AM, Samuel FH, Doty H, Valtierra S: J. Mater. Sci. 2003, 8, 1255–1267.10.1023/A:1022870006721 ↗
38. 10.1007/s11661-005-0106-310.1007/s11661-005-0106-3 ↗
39. Anson PJ: ‘The nucleation and growth of microporosity in aluminium-7 silicon foundry alloy’, PhD thesis, McGill University, Canada, 2000.
40. Fox S, Campbell J: Scr. Mater. 2000, 43, 881–886.10.1016/S1359-6462(00)00506-6 ↗
41. Griffiths WD, Raiszadeh R: J. Mater. Sci. 2009, 44, 3402– 3407.10.1007/s10853-009-3450-7 ↗
42. Raiszadeh R · Metall. Mater. Trans. B · 2010 · 42 · 13310.1007/s11663-010-9439-4 ↗
43. Nyahumwa C · Afr. J. Sci. Technol. (AJST) · 2005 · 6 · 43
44. 10.1016/S0921-5093(96)10433-010.1016/S0921-5093(96)10433-0 ↗
45. 10.1007/s11661-001-0266-810.1007/s11661-001-0266-8 ↗
46. 10.1007/s11663-009-9282-710.1007/s11663-009-9282-7 ↗
47. 10.1007/s11663-010-9463-410.1007/s11663-010-9463-4 ↗
48. Li DZ, Campbell J, Li YY: J. Mater. Process. Technol. 2004, 148, 310–316.10.1016/j.jmatprotec.2004.02.032 ↗
49. Campbell J: ‘Casting practice: the 10 rules of castings’, 1st edn; 2004, Oxford, Butterworth-Heinemann Ltd.
50. 10.1016/0921-5093(93)90226-510.1016/0921-5093(93)90226-5 ↗
51. 10.1007/s11663-009-9272-910.1007/s11663-009-9272-9 ↗
52. 10.1016/j.jallcom.2009.10.27110.1016/j.jallcom.2009.10.271 ↗
53. Aryafar M, Raiszadeh R, Shalbafzadeh A: J. Mater. Sci. 2010, 45, 3041–3051.10.1007/s10853-010-4308-8 ↗
54. 10.1007/s11661-009-9804-610.1007/s11661-009-9804-6 ↗
55. Atkinson HV · Metall. Mater. Trans. A · 2000 · 3110.1007/s11661-000-0078-2 ↗
56. 10.52339/tjet.v29i1.37410.52339/tjet.v29i1.374 ↗